Page 1489 of 4378
Klj . 3 ba
32003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...
Page 1490 of 4378
IN-
VEHICLE REPAIR
Engine Mount LH
Removal 1. Install the special tools.
2. Install the special tool.
3. Raise the vehicle. For additional information, refer to Section 100 - 02 .
4. Remove the two nuts. SECTION 303-
01C: Engine — Cobra 4.6L (4V) 2003 Mustang Workshop Manual Special Tool(s)
Lifting Bracket, Engine
303-
D088 (D93P-6001- A2) 3-
Bar Engine Support Kit
303- F072 Klj . 1 ba
32003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...
Page 1491 of 4378
5. Lower the vehicle.
6. Using the special tool, raise the engine.
7. Raise the vehicle on a hoist.
8. Remove the engine mount.
Installation 1. To install, follow the removal procedure in reverse. Klj . 2 ba
32003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...
Page 1492 of 4378
Klj . 3 ba
32003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...
Page 1493 of 4378
REMOVAL
Engine
Removal
1. Remove the battery. For additional information, refer to Section 414 - 01 .
2. Release the fuel pressure. For additional information, refer to Section 310 - 00 .
3. Drain the engine cooling system. For additional information, refer to Section 303 - 03A .
4. Drain the supercharger cooling system. For additional information, refer to Section 303 - 03B .
5. Recover the A/C system refrigerant. For additional information, refer to Section 412 - 00 .
6. Remove the hood- to-body ground strap. 7. NOTE: Mark the hood hinge locations to aid in hood installation. SECTION 303-
01C: Engine — Cobra 4.6L (4V) 2003 Mustang Workshop Manual Special Tool(s)
Lifting Bracket, Engine
303-
D087 (D93P-6001- A1) Lifting Bracket, Engine
303-
D088 (D93P-6001- A2) Spreader Bar
303-
D089 (D93P-6001- A3) Klj . 1 ba
172003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...
Page 1494 of 4378
Remove the four nuts and the hood.
8. Disconnect the intake air temperature (IAT) sensor.
9. Disconnect the breather hose.
10. Disconnect the vacuum hose.
11. Loosen the clamps and remove the air cleaner outlet pipe. Klj . 2 ba
172003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...
Page 1495 of 4378
12. Disconnect the throttle position (TP) sensor and the idle air control (IAC) valve electrical
connectors.
13. Disconnect the vacuum hose.
14. Disconnect the A/C pressure switch electrical connector.
15. Disconnect the fuel tube spring lock coupling. For additional information, refer to Section 310 -
00 . Klj . 3 ba
172003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...
Page 1496 of 4378