2003 FORD MUSTANG Workshop Manual

Page 969 of 4378

FORD MUSTANG 2003  Workshop Manual 5. To install, reverse the removal procedure.  Klj .  2 ba
  22003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

Page 970 of 4378

FORD MUSTANG 2003  Workshop Manual IN-
VEHICLE REPAIR 
Valve Cover RH 
Removal and Installation  1. Remove the throttle body. For additional information, refer to Section 303 - 04A  . 
2. Disconnect the crankcase vent hose. 
3. Remove

Page 971 of 4378

FORD MUSTANG 2003  Workshop Manual 6. Position the spark plug wires aside. 
7. Remove the RH valve cover. 
8. To install, reverse the removal procedure. 
�zInstall a new valve cover gasket as necessary.  Klj .  2 ba
  32003 Mustan

Page 972 of 4378

FORD MUSTANG 2003  Workshop Manual Klj .  3 ba
  32003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

Page 973 of 4378

FORD MUSTANG 2003  Workshop Manual IN-
VEHICLE REPAIR 
Crankshaft Pulley 
Removal  1. Remove the drive belt (8620). For additional information, refer to  Section 303 - 05  . 
2. Remove the radiator coolant recovery reservoir (8A080).

Page 974 of 4378

FORD MUSTANG 2003  Workshop Manual 5. Using the special tool, remove the crankshaft pulley (6B321). 
Installation  1. Apply a bead of silicone gasket and sealant to the keyway in the crankshaft damper and use the  special tool to insta

Page 975 of 4378

FORD MUSTANG 2003  Workshop Manual 4. Install the radiator coolant recovery reservoir. 
5. Install the drive belt. For additional information, refer to 
Section 303 - 05  .  Klj .  3 ba
  32003 Mustang Workshop Manual
17. 11. 2011

Page 976 of 4378

FORD MUSTANG 2003  Workshop Manual IN-
VEHICLE REPAIR 
Crankshaft Front Seal 
Removal  1. Remove the crankshaft pulley. For additional information, refer to  Crankshaft Pulley  in this 
section. 
2. Using the special tool, remove and d