2003 FORD MUSTANG Workshop Manual

Page 705 of 4378

FORD MUSTANG 2003  Workshop Manual Klj .  2 ba
  22003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

Page 706 of 4378

FORD MUSTANG 2003  Workshop Manual REMOVAL AND INSTALLATION 
Sensor —
Front 
Removal  1. Remove the wheel and tire assembly. For additional information, refer to  Section 204 - 04  . 
2. Remove the inner fender splash shield.  1. Rem

Page 707 of 4378

FORD MUSTANG 2003  Workshop Manual Installation 
1. To install, reverse the removal procedure.  Klj .  2 ba
  32003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

Page 708 of 4378

FORD MUSTANG 2003  Workshop Manual Klj .  3 ba
  32003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

Page 709 of 4378

FORD MUSTANG 2003  Workshop Manual REMOVAL AND INSTALLATION 
Sensor —
Rear 
Removal  1. Remove the rear passenger seat. 
2. Disconnect the rear anti- lock brake sensor electrical connector. 
3. Raise and support the vehicle. For addi

Page 710 of 4378

FORD MUSTANG 2003  Workshop Manual 1. Remove the rear anti-
lock brake sensor bolt. 
2. Remove the rear anti- lock brake sensor. 
Installation  1. NOTE:  Be sure to apply High Temperature Nickel Anti- Sieze Lubricant F6AZ-9L494-AA 
mee

Page 711 of 4378

FORD MUSTANG 2003  Workshop Manual REMOVAL AND INSTALLATION 
Switch —
Traction Control 
Removal and Installation  1. NOTE:  If the vehicle is equipped with an automatic transmission, position the shift lever in the 1 
position before

Page 712 of 4378

FORD MUSTANG 2003  Workshop Manual 5. To install, reverse the removal procedure.  Klj .  2 ba
  22003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...