2003 FORD MUSTANG Workshop Manual

Page 153 of 4378

FORD MUSTANG 2003  Workshop Manual REMOVAL AND INSTALLATION 
Wheel Studs 
Removal 
1. Remove the wheel hub (1104). For additional information, refer to  Wheel Hub and Bearing  in 
this section. 
2. Using a press, remove the wheel stud

Page 154 of 4378

FORD MUSTANG 2003  Workshop Manual Klj .  2 ba
  22003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

Page 155 of 4378

FORD MUSTANG 2003  Workshop Manual REMOVAL AND INSTALLATION 
Wheel Hub and Bearing 
Removal 
 CAUTION: Suspension fasteners are critical parts because they affect performance of vital 
components and systems and their failure can resul

Page 156 of 4378

FORD MUSTANG 2003  Workshop Manual Installation 
1. NOTE:  Use a new wheel hub retainer and hub cap grease seal. 
To install, reverse the removal procedure.  Klj .  2 ba
  22003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/

Page 157 of 4378

FORD MUSTANG 2003  Workshop Manual REMOVAL AND INSTALLATION 
Arm —
Lower 
Removal 
 CAUTION: Suspension fasteners are critical parts because they affect performance of vital 
components and systems and their failure can result in maj

Page 158 of 4378

FORD MUSTANG 2003  Workshop Manual 6. Remove the front coil spring (5310). For additional information, refer to 
Spring  in this section. 
7. Remove the nut and the front suspension lower control arm. Discard the nut. 
Installation  1.

Page 159 of 4378

FORD MUSTANG 2003  Workshop Manual REMOVAL AND INSTALLATION 
Bar —
Stabilizer 
Removal 
 CAUTION: Suspension fasteners are critical parts because they affect performance of vital 
components and systems and their failure can result i

Page 160 of 4378

FORD MUSTANG 2003  Workshop Manual 6. Remove the stabilizer bar. 
7. If necessary, cut the stabilizer bar insulators (5493) from the stabilizer bar. 
Installation  1. NOTE:  To aid installation, coat the necessary parts of the front st