Page 1465 of 4378
8. Remove the exhaust manifold.
1. Remove the nuts.
2. Remove the exhaust manifold.
3. Remove and discard the gasket.
9. Remove the oil level indicator tube.
10. Remove and discard the exhaust manifold gasket.
11. To install, reverse the removal procedure. zUse a new exhaust manifold gasket. Klj . 2 ba
32003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...
Page 1466 of 4378
Klj . 3 ba
32003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...
Page 1467 of 4378
IN-
VEHICLE REPAIR
Oil Filter Adapter
Removal and Installation 1. Drain the cooling system. For additional information, refer to Section 303 - 03A
2. Disconnect the lower radiator hose.
3. Raise the vehicle. For additional information, refer to
Section 100 - 02 .
4. Drain the engine oil.
5. Remove the oil cooler. 1. Remove the oil bypass filter.
2. Remove the insert and the oil cooler.
3. Inspect the O- ring and clean the sealing surface.
6. Clean and inspect the oil cooler.
SECTION 303-
01C: Engine — Cobra 4.6L (4V) 2003 Mustang Workshop Manual Klj . 1 ba
32003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...
Page 1468 of 4378