2003 FORD MUSTANG Workshop Manual

Page 2545 of 4378

FORD MUSTANG 2003  Workshop Manual Klj .  2 ba
  22003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_2748/S3B~us~en~ ...

Page 2546 of 4378

FORD MUSTANG 2003  Workshop Manual DISASSEMBLY AND ASSEMBLY OF SUBASSEMBLIES 
Torque Converter End Play Check 
1. Install the special tool into the torque converter pump drive.  �zTighten the inner post until the tool is securely locke

Page 2547 of 4378

FORD MUSTANG 2003  Workshop Manual 4. Remove the special tools.  New or Rebuilt Torque Converter  Used Torque Converter 
0.355-
1.04 mm (0.014- 0.041 inch) Max.  0.355-
1.87 mm (0.014- 0.074 inch) Max.  Klj .  2 ba
  22003 Mustang

Page 2548 of 4378

FORD MUSTANG 2003  Workshop Manual DISASSEMBLY AND ASSEMBLY OF SUBASSEMBLIES 
Torque Converter One-
Way Clutch Check 
1. Install the special tool in one of the grooves in the stator thrust washer. 
2. Install the special tool in the co

Page 2549 of 4378

FORD MUSTANG 2003  Workshop Manual �z
If the torque converter fails the lockup test torque, install a new or remanufactured torque 
converter.  Klj .  2 ba
  22003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/ts

Page 2550 of 4378

FORD MUSTANG 2003  Workshop Manual DISASSEMBLY AND ASSEMBLY OF SUBASSEMBLIES 
Torque Converter Turbine to Pump Stator Interference 
Check 
1. NOTE:  Front pump support may remain in front pump support and gear during this test. 
Positi

Page 2551 of 4378

FORD MUSTANG 2003  Workshop Manual Klj .  2 ba
  22003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_2748/S3B~us~en~ ...

Page 2552 of 4378

FORD MUSTANG 2003  Workshop Manual ASSEMBLY 
Transmission 
SECTION 307-
01: Automatic Transaxle/Transmission  2003 Mustang Workshop Manual Special Tool(s) 
Dial Indicator Gauge with 
Holding Fixture 
100-
002 (TOOL- 4201-C)  Rubber Tip