2003 FORD MUSTANG Workshop Manual

Page 3785 of 4378

FORD MUSTANG 2003  Workshop Manual 10.
 CAUTION: Open a window to prevent the windshield glass from being pushed out 
by air pressure when a door is closed. 
Using the alignment marks install the windshield glass. 
11. After the glass

Page 3786 of 4378

FORD MUSTANG 2003  Workshop Manual 17. Install the roof side trim moulding. For additional information, refer to 
Section 501 - 08  . 
Convertible  18. Install the exterior A- pillar moulding and screw. 
19. Install the weatherstrip re

Page 3787 of 4378

FORD MUSTANG 2003  Workshop Manual �z
Connect the electrical connector(s). 
22. Install the visor trim moulding. 
All vehicles  23. Install the RH and LH windshield side garnish moulding.  �zIf equipped with a convertible top, install

Page 3788 of 4378

FORD MUSTANG 2003  Workshop Manual Klj .  10 ba
  102003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_5108/S3B~us~en~ ...

Page 3789 of 4378

FORD MUSTANG 2003  Workshop Manual REMOVAL AND INSTALLATION 
Door Glass Run Retainer 
Removal 
1. Remove the door trim panel. For additional information, refer to  Section 501 - 05  . 
2. Remove the watershield. 
3. Position the door w

Page 3790 of 4378

FORD MUSTANG 2003  Workshop Manual SPECIFICATIONS 
SECTION 501-
12: Instrument Panel and Console  2003 Mustang Workshop Manual Torque Specifications 
Description  Nm  lb-
ft  lb-
in  Bulkhead wiring harness electrical connector bolt  5

Page 3791 of 4378

FORD MUSTANG 2003  Workshop Manual DESCRIPTION AND OPERATION 
Instrument Panel 
The instrument panel consists of the following components: 
�zinstrument cluster 
�z instrument panel finish panels 
�z audio unit 
�z A/C controls 
�z glo

Page 3792 of 4378

FORD MUSTANG 2003  Workshop Manual DESCRIPTION AND OPERATION 
Console —
Floor 
The floor console consists of the following components: 
�zconsole glove compartment 
�z console glove compartment door 
�z beverage holder 
�z cigar ligh