2003 FORD MUSTANG Workshop Manual

Page 3825 of 4378

FORD MUSTANG 2003  Workshop Manual Installation 
1. To install, reverse the removal procedure.  Klj .  2 ba
  22003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_5108/S3B~us~en~ ...

Page 3826 of 4378

FORD MUSTANG 2003  Workshop Manual REMOVAL AND INSTALLATION 
Ignition Lock Cylinder —
Functional 
Removal and Installation  1. Disconnect the battery ground cable. For additional information, refer to  Section 414 - 01  . 
2. Remove

Page 3827 of 4378

FORD MUSTANG 2003  Workshop Manual Klj .  2 ba
  22003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_5108/S3B~us~en~ ...

Page 3828 of 4378

FORD MUSTANG 2003  Workshop Manual REMOVAL AND INSTALLATION 
Ignition Lock Cylinder —
Non-Functional 
Removal and Installation  1. NOTE:  Make sure the front wheels are in the straight- ahead position. 
Disconnect the battery ground

Page 3829 of 4378

FORD MUSTANG 2003  Workshop Manual Remove the ignition switch lock cylinder. 
�zUse a 1/8- inch diameter drill bit to drill out the lock cylinder retaining pin. 
�z Use a 3/8- inch drill bit to drill down the middle of the ignition loc

Page 3830 of 4378

FORD MUSTANG 2003  Workshop Manual 9.
 WARNING: To avoid the risk of serious personal injury, read and follow all 
warnings, cautions, notes and instructions in the reactivation procedure. 
Reactivate the supplemental restraint system

Page 3831 of 4378

FORD MUSTANG 2003  Workshop Manual REMOVAL AND INSTALLATION 
Lock Cylinder —
Door 
Removal  1. NOTE:  Individual lock cylinders are repaired by discarding the inoperative cylinder and building 
a new lock cylinder using the appropria

Page 3832 of 4378

FORD MUSTANG 2003  Workshop Manual Installation 
1. To install, reverse the removal procedure.  Klj .  2 ba
  22003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_5108/S3B~us~en~ ...