2003 FORD MUSTANG Workshop Manual

Page 3009 of 4378

FORD MUSTANG 2003  Workshop Manual SPECIFICATIONS 
SECTION 310-
03: Speed Control  2003 Mustang Workshop Manual Torque Specifications 
Description  Nm  lb-
ft  lb-
in  Battery ground cable  7-
10  — 62-89 
Horn contact screws  6.5-
7

Page 3010 of 4378

FORD MUSTANG 2003  Workshop Manual DESCRIPTION AND OPERATION 
Speed Control 
The speed control system consists of the following components: 
�zspeed control actuator cable (9A825) 
�z deactivator switch 
�z output shaft sensor (OSS) 
�

Page 3011 of 4378

FORD MUSTANG 2003  Workshop Manual DIAGNOSIS AND TESTING 
Speed Control 
Refer to Wiring Diagrams Cell 
31  , Speed Control for schematic and connector information. 
Principles of Operation 
The speed control system is designed to main

Page 3012 of 4378

FORD MUSTANG 2003  Workshop Manual �z
speed control actuator switches. 
�z brake pedal position (BPP) switch. 
�z clutch pedal position (CPP) switch. 
�z deactivator switch. 
The output of the speed control servo is the: 
�zspeed contr

Page 3013 of 4378

FORD MUSTANG 2003  Workshop Manual inoperative 
box (CJB) fuse 
17 (15A), 33 
(15A). 
�z Battery junction 
box (BJB) fuse 
HORN (20A). 
�z Circuitry. 
�z Deactivator 
switch. 
�z Clutch pedal 
position (CPP) 
switch. 
�z Speed control

Page 3014 of 4378

FORD MUSTANG 2003  Workshop Manual Pinpoint Tests 
PINPOINT TEST A: THE SPEED CONTROL IS INOPERATIVE 
Test Step  Result / Action to Take 
A1 CHECK THE SPEED CONTROL SERVO VOLTAGE AND 
GROUND  �z
Key in OFF position. 
�z Disconnect: Spe

Page 3015 of 4378

FORD MUSTANG 2003  Workshop Manual �z
Is the voltage greater than 10 volts?  A4 CHECK CIRCUIT 10 (LG/RD) FOR AN OPEN 
�z
Disconnect: Deactivator Switch C2210. 
�z Measure the voltage between deactivator switch C2210 Pin 1, 
Circuit 10

Page 3016 of 4378

FORD MUSTANG 2003  Workshop Manual �z
Is the voltage greater than 10 volts?  A7 CHECK CIRCUIT 151 (LB/BK) FOR AN OPEN 
�z
Disconnect: Air Bag Sliding Contact C218a. 
�z Measure the resistance between speed control servo C122 Pin 
5, Ci