Page 3833 of 4378
REMOVAL AND INSTALLATION
Lock Cylinder —
Luggage Compartment Lid
Removal 1. NOTE: Individual lock cylinders are repaired by discarding the inoperative cylinder and building
a new lock cylinder using the appropriate lock repair package. The lock repair package includes
a detailed instruction sheet to build the new lock cylinder to the current key code of the vehicle.
Disconnect the luggage compartment lid lock actuator (432A38) cable.
2. Remove the luggage compartment lid lock cylinder (43262). 1. Remove the rivet.
2. Rotate the lock cylinder counterclockwise to remove.
Installation 1. To install, reverse the removal procedure.
SECTION 501-
14A: Handles, Locks, Latches and Mechanisms 2003 Mustang Workshop Manual Klj . 1 ba
22003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_5108/S3B~us~en~ ...
Page 3834 of 4378
Klj . 2 ba
22003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_5108/S3B~us~en~ ...
Page 3835 of 4378
REMOVAL AND INSTALLATION
Push Button Rod —
Door
Removal 1. Remove the door trim panel (23942). For additional information, refer to Section 501 - 05 .
2. Release the push button rod by opening the clip.
Installation 1. To install, reverse the removal procedure.
SECTION 501-
14A: Handles, Locks, Latches and Mechanisms 2003 Mustang Workshop Manual Klj . 1 ba
12003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_5108/S3B~us~en~ ...
Page 3836 of 4378
REMOVAL AND INSTALLATION
Actuator —
Door Lock
Removal 1. Remove the door trim panel (23942). For additional information, refer to Section 501 - 05 .
2. Remove the door latch (21812). For additional information, refer to Latch — Door .
3. Remove the door ajar switch. zRelease the locking tab.
4. Remove the adjunct actuator.
Installation 1. To install, reverse the removal procedure.
SECTION 501-
14A: Handles, Locks, Latches and Mechanisms 2003 Mustang Workshop Manual Klj . 1 ba
22003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_5108/S3B~us~en~ ...
Page 3837 of 4378
Klj . 2 ba
22003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_5108/S3B~us~en~ ...
Page 3838 of 4378
REMOVAL AND INSTALLATION
Switch —
Door Ajar Switch
Removal 1. Remove the door trim panel (23942). For additional information, refer to Section 501 - 05 .
2. Remove the door latch (21812). For additional information, refer to Latch — Door .
3. Remove the door ajar switch. zRelease the locking tab.
Installation 1. To install, reverse the removal procedure.
SECTION 501-
14A: Handles, Locks, Latches and Mechanisms 2003 Mustang Workshop Manual Klj . 1 ba
12003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_5108/S3B~us~en~ ...
Page 3839 of 4378
REMOVAL AND INSTALLATION
Switch —
Door Lock
Removal
1. CAUTION: Place a rag between the window regulator switch plate and the door trim
panel to avoid damaging the door trim panel.
Position the window regulator switch plate (14524) aside. 1. Pull at service notch.
2. Lift to release the clip at the rear edge.
2. Remove the screws and the door lock switch (14017).
Installation 1. To install, reverse the removal procedure.
SECTION 501-
14A: Handles, Locks, Latches and Mechanisms 2003 Mustang Workshop Manual Klj . 1 ba
22003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_5108/S3B~us~en~ ...
Page 3840 of 4378
Klj . 2 ba
22003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_5108/S3B~us~en~ ...