2003 FORD MUSTANG Workshop Manual

Page 3705 of 4378

FORD MUSTANG 2003  Workshop Manual 13. Remove the front seat cushion frame and spring (63100). 
Vehicles with power cushion bolster  14. Disconnect the hoses from the two bolster adjuster pads (one shown) and slide the bolster  adjuste

Page 3706 of 4378

FORD MUSTANG 2003  Workshop Manual DISASSEMBLY AND ASSEMBLY 
Front Seat Backrest 
Disassembly and Assembly 
All vehicles 
1. Remove the front seat backrest. For additional information, refer to  Front Seat Backrest  in this 
section.

Page 3707 of 4378

FORD MUSTANG 2003  Workshop Manual 6. Remove the seat backrest latch handle knob. 
7. Pull the seat backrest trim cover upward. 
8. Remove the hog rings. 
9. Remove the front seat backrest trim cover (64416) from the front seat backres

Page 3708 of 4378

FORD MUSTANG 2003  Workshop Manual 10. Release the front seat backrest frame (61018) from the front seat backrest foam pad. 
Vehicles with standard power lumbar  11. Remove the seat backrest lumbar adjuster pad. 
Vehicles with power bo

Page 3709 of 4378

FORD MUSTANG 2003  Workshop Manual All vehicles 
13. To assemble, reverse the disassembly procedure.  Klj .  4 ba
  42003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_5108/S3B~us~en~ ...

Page 3710 of 4378

FORD MUSTANG 2003  Workshop Manual SPECIFICATIONS 
SECTION 501-
11: Glass, Frames and Mechanisms  2003 Mustang Workshop Manual WINDOW REGULATOR ELECTRIC DRIVE 
CURRENT DRAW 
Description  Specification 
No Load  5 amperes or less at 12.

Page 3711 of 4378

FORD MUSTANG 2003  Workshop Manual Klj .  2 ba
  22003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_5108/S3B~us~en~ ...

Page 3712 of 4378

FORD MUSTANG 2003  Workshop Manual DESCRIPTION AND OPERATION 
Glass, Frames and Mechanisms 
Component Location 
Windshield Glass 
The windshield exterior mouldings are installed with the windshield glass. The windshield exterior 
mould