2003 FORD MUSTANG Workshop Manual

Page 3593 of 4378

FORD MUSTANG 2003  Workshop Manual DESCRIPTION AND OPERATION 
Insulation 
Insulation is comprised of urethane, PVC, and recycled felt. Insulation is installed: 
�zUnder the roof panel (50202). 
�z Above and below the instrument panel (

Page 3594 of 4378

FORD MUSTANG 2003  Workshop Manual DESCRIPTION AND OPERATION 
Body Sealer Types And Applications 
Liquid Butyl Sealer 
HB Fuller E709-19554-
B or equivalent meeting Ford Specification ESB-M4G162- A: 
�z Does not run. 
�z Is fast drying

Page 3595 of 4378

FORD MUSTANG 2003  Workshop Manual Klj .  2 ba
  22003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_5108/S3B~us~en~ ...

Page 3596 of 4378

FORD MUSTANG 2003  Workshop Manual DIAGNOSIS AND TESTING 
Body System 
Inspection and Verification 
Leaks 
NOTE: 
Trim will reveal the location of most leaks. 
1. Remove any trim or carpet in the general area of the leak. 
2. Road test

Page 3597 of 4378

FORD MUSTANG 2003  Workshop Manual �z
Wind Noise, 
Air Entering 
Vehicle 
Through Small 
Holes in Body  �z
Leaks at door and 
window seals or 
sheet metal joints in 
doors or door 
openings.  �z
SEAL leaks with Silicone 
Gasket and Sea

Page 3598 of 4378

FORD MUSTANG 2003  Workshop Manual SPECIFICATIONS 
SECTION 501-
02: Front End Body Panels  2003 Mustang Workshop Manual Torque Specifications 
Description  Nm  lb-
ft  lb-
in  Hood latch support screws  12  9  —
Hood latch retaining

Page 3599 of 4378

FORD MUSTANG 2003  Workshop Manual DESCRIPTION AND OPERATION 
Front End Body Panels 
The front end body panel components consist of the following: 
�zair deflectors 
�z cowl grille 
�z fenders 
�z fender splash shields 
�z hood 
�z hoo

Page 3600 of 4378

FORD MUSTANG 2003  Workshop Manual REMOVAL AND INSTALLATION 
Fender 
Removal and Installation 
1. On the RH fender, remove the antenna base.  1. Remove the antenna base cap. 
2. Remove the screws. 
3. Remove the antenna base. 
4. Disco