2003 FORD MUSTANG Workshop Manual

Page 617 of 4378

FORD MUSTANG 2003  Workshop Manual Brake Pressure Control Valve 
The brake pressure control valve proportions the pressure to the rear brakes. 
�zWhen the brake pedal is applied, brake fluid pressure passes through the proportioning va

Page 618 of 4378

FORD MUSTANG 2003  Workshop Manual REMOVAL AND INSTALLATION 
Pedal and Bracket 
Removal 
1. Disconnect the battery ground cable (14301). For additional information, refer to  Section 414 -
01  . 
2. Remove the stoplight switch retainin

Page 619 of 4378

FORD MUSTANG 2003  Workshop Manual 6. Remove the brake pedal and bracket. 
Installation  1. To install, reverse the removal procedure.  Klj .  2 ba
  32003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/S

Page 620 of 4378

FORD MUSTANG 2003  Workshop Manual Klj .  3 ba
  32003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

Page 621 of 4378

FORD MUSTANG 2003  Workshop Manual REMOVAL AND INSTALLATION 
Master Cylinder 
Removal 
1. Disconnect the fluid level sensor connector. 
2. Disconnect the brake tubes. 
3. Remove the brake master cylinder nuts. 
4. Remove the brake mast

Page 622 of 4378

FORD MUSTANG 2003  Workshop Manual Klj .  2 ba
  22003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

Page 623 of 4378

FORD MUSTANG 2003  Workshop Manual REMOVAL AND INSTALLATION 
Master Cylinder —
Hydro-Boost 
Removal  1. Disconnect the fluid level sensor connector. 
2. Disconnect the brake tubes. 
3. Remove the brake master cylinder nuts.  4. Remov

Page 624 of 4378

FORD MUSTANG 2003  Workshop Manual Installation 
1. To install, reverse the removal procedure.  �zBleed the brake system. For additional information, refer to  Section 206 - 00  .  Klj .  2 ba
  32003 Mustang Workshop Manual
17. 1