2003 FORD MUSTANG Workshop Manual

Page 2985 of 4378

FORD MUSTANG 2003  Workshop Manual Klj .  2 ba
  22003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_2308/S3B~us~en~ ...

Page 2986 of 4378

FORD MUSTANG 2003  Workshop Manual REMOVAL AND INSTALLATION 
Fuel Tank Filler Pipe 
Removal 
1. Remove the fuel tank. For additional information, refer to  Fuel Tank  in this section. 
2. Remove the bolts from the filler pipe housing.

Page 2987 of 4378

FORD MUSTANG 2003  Workshop Manual REMOVAL AND INSTALLATION 
Fuel Filter 
Removal 
 WARNING: Fuel supply lines on all vehicles equipped with fuel injected engines will 
remain pressurized for long periods of time after engine shutdown.

Page 2988 of 4378

FORD MUSTANG 2003  Workshop Manual Klj .  2 ba
  22003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_2308/S3B~us~en~ ...

Page 2989 of 4378

FORD MUSTANG 2003  Workshop Manual REMOVAL AND INSTALLATION 
Inertia Fuel Shutoff (IFS) Switch 
Removal 
1. Disconnect the battery. For additional information, refer to  Section 414 - 01  . 
2. Open the luggage compartment. 
3. Remove

Page 2990 of 4378

FORD MUSTANG 2003  Workshop Manual DESCRIPTION AND OPERATION 
Acceleration Control 
Component Locations 
The throttle is controlled by the accelerator cable which is connected to the accelerator pedal and 
shaft. 
�zThe accelerator ped

Page 2991 of 4378

FORD MUSTANG 2003  Workshop Manual Klj .  2 ba
  22003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_2308/S3B~us~en~ ...

Page 2992 of 4378

FORD MUSTANG 2003  Workshop Manual DIAGNOSIS AND TESTING 
Acceleration Control 
Inspection and Verification 
1. Verify the customers concern by operating the acceleration control system to duplicate the  condition. 
2. Inspect to dete