2003 FORD MUSTANG Workshop Manual

Page 753 of 4378

FORD MUSTANG 2003  Workshop Manual Klj .  3 ba
  32003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

Page 754 of 4378

FORD MUSTANG 2003  Workshop Manual REMOVAL AND INSTALLATION 
Pump —
CIII 
Removal and Installation  1. Remove the pulley. For additional information, refer to  Pulley — CIII Pump  in this section. 
2. Remove the bolt and bracket.

Page 755 of 4378

FORD MUSTANG 2003  Workshop Manual 5. To install, reverse the removal procedure. 
�zUsing the special tool, install a new seal ring. 
6. Fill and leak check the power steering system. For additional information, refer to  Section 211 -

Page 756 of 4378

FORD MUSTANG 2003  Workshop Manual Klj .  3 ba
  32003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

Page 757 of 4378

FORD MUSTANG 2003  Workshop Manual REMOVAL AND INSTALLATION 
Pulley —
CII Pump 
Removal  1. Remove the drive belt. For additional information, refer to  Section 303 - 05  . 
2. Using the special tool, remove the pulley. 
Installation

Page 758 of 4378

FORD MUSTANG 2003  Workshop Manual 2. Install the drive belt. For additional information, refer to 
Section 303 - 05  .  Klj .  2 ba
  22003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us

Page 759 of 4378

FORD MUSTANG 2003  Workshop Manual REMOVAL AND INSTALLATION 
Pulley —
CIII Pump 
Removal  1. Remove the drive belt. For additional information, refer to  Section 303 - 05  . 
2. Raise and support the vehicle. For additional informati

Page 760 of 4378

FORD MUSTANG 2003  Workshop Manual 2. Install the drive belt. For additional information, refer to 
Section 303 - 05  . 
3. Lower the vehicle.  Klj .  2 ba
  22003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/ts