Page 3689 of 4378
REMOVAL AND INSTALLATION
Lumbar Assembly
Removal and Installation
All vehicles
1. Remove the front seat. For additional information, refer to Seat — Front Power in this section.
2. Release the J- clip.
3. Remove the seat backrest latch handle knob (62762).
4. Pull the seat backrest trim cover up to the top of the seat.
5. Remove the seat backrest foam pad from the seat backrest frame.
Vehicles with standard power lumbar SECTION 501-
10: Seating 2003 Mustang Workshop Manual Klj . 1 ba
32003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_5108/S3B~us~en~ ...
Page 3690 of 4378
6. Disconnect the power lumbar support air hose.
7. Remove the seat backrest adjuster (65500).
Vehicles with power bolster and lumbar 8. Disconnect the lumbar and bolster air supply hoses.
9. Remove the two screws and remove the lumbar and bolster adjuster pad. Klj . 2 ba
32003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_5108/S3B~us~en~ ...
Page 3691 of 4378
All vehicles
10. To install, reverse the removal procedure. Klj . 3 ba
32003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_5108/S3B~us~en~ ...
Page 3692 of 4378
REMOVAL AND INSTALLATION
Seat —
Front Power
Removal and Installation 1. Remove the safety belt through the opening in the safety belt guide.
2. Move the seat forward.
3. Remove the bolt covers and remove the seat track bolts.
4. Move the seat rearward.
5. Remove the seat track nuts.
6. Move the seat forward.
7. Disconnect the battery. For additional information, refer to Section 414 - 01 .
SECTION 501-
10: Seating 2003 Mustang Workshop Manual Klj . 1 ba
22003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_5108/S3B~us~en~ ...
Page 3693 of 4378
8. Disconnect the power seat electrical connector.
9. Remove the power seat.
10. To install, reverse the removal procedure. Klj . 2 ba
22003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_5108/S3B~us~en~ ...
Page 3694 of 4378
REMOVAL AND INSTALLATION
Seat Track
Removal and Installation
1. Remove the front seat. For additional information, refer to Seat — Front Power in this section.
2. Remove the outboard seat trim shield.
3. Disconnect the electrical connector.
4. Remove the seat track bolts.
5. To install, reverse the removal procedure.
SECTION 501-
10: Seating 2003 Mustang Workshop Manual Klj . 1 ba
22003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_5108/S3B~us~en~ ...
Page 3695 of 4378
Klj . 2 ba
22003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_5108/S3B~us~en~ ...
Page 3696 of 4378
REMOVAL AND INSTALLATION
Lumbar Motor
Removal and Installation
All vehicles
1. Remove the front seat. For additional information, refer to Seat — Front Power in this section.
2. Disconnect the power seat track electrical connector.
3. Remove the four seat track bolts.
Vehicles with standard power lumbar 4. Release the J- clip.
5. Remove the front seat backrest pad adjusting pump screws.
SECTION 501-
10: Seating 2003 Mustang Workshop Manual Klj . 1 ba
32003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_5108/S3B~us~en~ ...