Page 937 of 4264
ELECTRICAL-BODY AND CHASSIS 8A-279
VEHICLE SPEED SENSOR (INSTALLED
ON THE TRANSMISSION)
The speed sensor is installed on the rear portion of the
transmission.
The number of pulses generated is four pulses per one rotation
of the pinion shaft.
RTW38DLF000201
Page 938 of 4264
8A-280 ELECTRICAL-BODY AND CHASSIS
Vehicle Speed Sensor Inspection
1. Connect the vehicle speed sensor connector 1 E-44to the
battery (+) terminal and 2
E-44 to the (-) terminal.
2. Connect a resistance of 1.3K ohm to 5K ohm (1/4 W o
r
more) between connectors 1 E-44 and 3 E-44
CAUTION:
Be extremely careful not to connect the battery (+)
terminal to the connector 3
E-44.
This may damage the vehicle speed sensor.
3. Rotate the shaft of the vehicle speed sensor slowly and
measure the voltage at the both ends with a digital tester.
The voltage, with one rotation of shaft fluctuates four times in
the following range: 10 to 14V - 2V or less.
Page 939 of 4264
ELECTRICAL-BODY AND CHASSIS 8A-281
HEATER AND AIR CONDITIONING
PARTS LOCATION (RHD)
RTW48AXF018801 & RTW48AXF018901
Page 940 of 4264
8A-282 ELECTRICAL-BODY AND CHASSIS
PARTS LOCATION (LHD)
RTW48AXF019001 & RTW48AXF019101
Page 941 of 4264
ELECTRICAL-BODY AND CHASSIS 8A-283
PARTS LOCATION (C24SE)
Page 942 of 4264
8A-284 ELECTRICAL-BODY AND CHASSIS
PARTS LOCATION 6VE1
Page 943 of 4264
ELECTRICAL-BODY AND CHASSIS 8A-285
PARTS LOCATION
4JA1-TC / 4JH1-TC
4JA1-L
RTW38DXF007601 & RTW48ALF000101
Page 944 of 4264
8A-286 ELECTRICAL-BODY AND CHASSIS
PARTS LOCATION
RTW38DXF007501