Page 561 of 4264
CAB 10-53
1) Pull out the adjuster knob.
RTW3A0SH000301
2) Open the through ring anchor cover and remove the
seat belt upper anchor bolt.
11. Center Pillar Upper Trim Cover
Pry the trim cover clips free from the body panel.
13. Body Side Rear Upper Trim Cover
Pry the trim cover clips free from the body panel.
Important Operations - Installation
12. Rear Tongue Side Seat Belt
Tighten the seat belt upper anchor bolt to the specified
torque.
Torque N
m (kgf
m/lb
ft)
40 (4.1/30)
Page 562 of 4264
10-54 CAB
10. Front Tongue Side Seat Belt
Tighten the seat belt upper anchor bolt to the specified
torque.
Torque N
m (kgf
m/lb
ft)
40 (4.1/30)
7. Rear End Trim Cover
Insert the hooks on the back upper portion of trim cove
r
to the body panel.
Page 563 of 4264
CAB 10-55
FUEL FILLER LID OPENER LEVER/CABLE
REMOVAL (REGULAR CAB RHD MODEL)
686R300015
Removal Steps
1. Front sill plate
2. Fuel filler lid opener cover
3. Fuel filler lid opener lever
4. Rear wheel housing extension panel
5. Fuel filler lid cable assembly
Page 564 of 4264
10-56 CAB
FUEL FILLER LID OPENER LEVER/CABLE
REMOVAL (EXTEND CAB RHD MODEL)
686R300016
Removal Steps
1. Front sill plate
2. Fuel filler lid opener cover
3. Fuel filler lid opener lever
4. Rear wheel housing extension panel
5. Fuel filler lid cable assembly
Page 565 of 4264
CAB 10-57
FUEL FILLER LID OPENER LEVER/CABLE
REMOVAL (REGULAR CAB LHD MODEL)
RTW4A0LF000101
Removal Steps
1. Front sill plate
2. Fuel filler lid opener cover
3. Fuel filler lid opener lever
4. Rear wheel housing extension panel
5. Fuel filler lid cable assembly
Page 566 of 4264
10-58 CAB
FUEL FILLER LID OPENER LEVER/CABLE
REMOVAL (EXTEND CAB LHD MODEL)
RTW4A0LF000201
Removal Steps
1. Front sill plate
2. Fuel filler lid opener cover
3. Fuel filler lid opener lever
4. Rear wheel housing extension panel
5. Fuel filler lid cable assembly
Page 567 of 4264
CAB 10-59
Important Operations - Removal
1. Front Sill Plate
Pull out the 4 clip positions.
2. Fuel Filler Lid Opener Cover
Pull out the 3 clip positions.
3. Fuel Filler Lid Opener Lever
Remove the 2 opener fixing bolts and disconnect the
cable.
5. Fuel Filler Lid Cable Assembly
Remove some fixing clips, turn the cable holder on the
side of recess in 90counterclockwise and remove i
t
from the recess. Pull out the grommet to frontward o
f
vehicle and remove the cable assembly.
Page 568 of 4264
10-60 CAB
FUEL FILLER LID OPENER LEVER/CABLE
REMOVAL (CREW CAB RHD MODEL)
686R300010
Removal Steps
1. Front sill plate
2. Rear sill plate
3. Center pillar lower trim cover
4. Fuel filler lid opener cover
5. Fuel filler lid opener lever
6. Rear wheel housing extension panel
7. Fuel filler lid cable assembly