Page 593 of 4264
CAB 10-85
Important Operations - Removal
1.
Body side rear lower trim cover
Refer to Interior Trim Panels in this section..
RTW3A0SH000301
3. Upper anchor bolt
Open the through ring anchor cover and remove the
seat belt upper anchor bolt
Important Operations - Installation
4. Retractor fixing bolt
Bolt torque N
m (kgf
m/lb
ft)
40 (4.1 / 30)
3. Upper anchor bolt
Bolt torque N
m (kgf
m/lb
ft)
40 (4.1 / 30)
2. Lower anchor bolt
Bolt torque N
m (kgf
m/lb
ft)
40 (4.1 / 30)
Page 594 of 4264
10-86 CAB
REMOVAL AND INSTALLATION
(REAR SEAT BELT BACKLE)
RTW3A0SF000201
Removal Steps
1. Cover
2. Bolt
3. Rear seat belt buckle
Installation Steps
3. Rear seat belt buckle
2. Bolt
1. Cover
Important Operation - Removal
1. Cover
Refer to Jump Seat (Extend Cab) in this section.
Important Operation - Installation
2. Bolt: Jump Seat Assembly/Rear Seat Belt Buckle to
Floor Panel
Torque N
m (kgf
m/lb
ft)
40 (4.1 / 30)
Page 595 of 4264
CAB 10-87
FRONT WHEEL EXTENTION
REMOVAL AND INSTALLATION
Removal Steps
1. Screw
2. Front wheel extension
Installation Steps
2. Front wheel extension
1. Screw
Important Operation - Removal
2. Front Wheel Extension pull out the 5 clip positions
Page 596 of 4264
10-88 CAB
REAR WHEEL EXTENTION
REMOVAL AND INSTALLATION
RTW4A0MF000501
Removal Steps
1. Screw
2. Rear wheel extension
Installation Steps
2. Rear wheel extension
1. Screw
Important Operation - Removal
2. Rear Wheel Extension Pull out the 6 clip positions (Extend cab)
Pull out the 5 clip positions (Crew cab)
Page 597 of 4264
CAB 10-89
TAIL GATE ASSEMBLY
REMOVAL AND INSTALLATION
CENTER PULL HANDLE MODEL
Removal Steps
1. Hole cover plate
2. Outside handle assembly
3. Tail gate lock assembly
4. Tail gate link
5. Tail gate
6. Tail gate hinge
7. Tail gate lock striker
Installation Steps
7. Tail gate lock striker
6. Tail gate hinge
5. Tail gate
4. Tail gate link
3. Tail gate lock assembly
2. Outside handle assembly
1. Hole cover plate
Page 598 of 4264

10-90 CAB
Important Operations - Removal
2. Outside Handle Assembly
Disconnect the lock link and remove the 2 fixing bolts.
5. Tail Gate
1) Removing the tailgate assembly may require two people.
2) Remove the tailgate hinge fixing bolts.
Important Operations - Installation
7. Tail Gate Lock Striker
Tighten the lock striker fixing bolts to the specified
torque.
Torque Nm(kgfm/lbft)
15 (1.5 / 11)
6. Tail Gate Hinge
Tighten the hinge fixing bolts to the specified torque.
C: Bolt
Torque Nm(kgfm/lbft)
40 (4.1 / 30)
5. Tail Gate
1) A: Bolts
Torque N
m(kgf
m/lb
in)
13 (1.3 / 113)
2) B: Bolt
Torque N
m(kgf
m/lb
in)
25 (2.5 / 18)
3) Check the tailgate and rear body.
a. Clearance: 5.0 mm (0.20 in.)
b. Height (Step): Flush
c. Height (Step): Flush
3. Tail Gate Lock Assembly
Tighten the lock assembly fixing bolts to the specified
torque.
Torque N
m(kgf
m/lb
ft)
15 (1.5 / 11)
2. Outside Handle Assembly
Tighten the outside handle assembly fixing bolts to the
specified torque and if remove the key cylinder (i
f
equipped) tighten it to the specified torque.
Torque N
m(kgf
m/lb
in)
9 (0.9 / 78)
Page 599 of 4264
Page 600 of 4264