Page 545 of 4264
CAB 10-37
Important Operations - Removal
1. Rear Floor Console (Bucket Seat Model Only)
1) Open the rear console lid and remove 2 screws.
2) Pull out the front part of rear console at the 2 clip
positions.
3. Front Floor Console
1) Remove the 2 screws.
2) Pull out the rear part of front console at the 2 clip
positions.
3) Remove the front console by pull out it rear ward.
Page 546 of 4264
10-38 CAB
CONSOLE BOX (WITHOUT FLOOR CONSOLE)
REMOVAL AND INSTALLATION
RTW4A0MF000201
M/T Model
Removal Steps
1. Screw
2. Console box
Installation Steps
2. Console box
1. Screw
Page 547 of 4264
CAB 10-39
HEADLINING
REMOVAL AND INSTALLATION
This illustration is based on RHD model
EXTEND CAB Model
Removal Steps
1. Interior trim panels
2. Sunvisor/Sunvisor holder
3. Spot light
4. Assist grip
5. Hole cover
6. Coat hook
7. Dome light
8. Headlining
Installation Steps
8. Headlining
7. Dome light
6. Coat hook
5. Hole cover
4. Assist grip
3. Spot light
2. Sunvisor/Sunvisor holder
1. Interior trim panels
Page 548 of 4264
10-40 CAB
REMOVAL AND INSTALLATION
This illustration is based on RHD model
RTW3A0LF001101
REGULAR CAB Model
Removal Steps
1. Interior trim panels
2. Sunvisor/Sunvisor holder
4. Assist grip
5. Hole cover
7. Dome light
8. Headlining
Installation Steps
8. Headlining
7. Dome light
5. Hole cover
4. Assist grip
2. Sunvisor/Sunvisor holder
1. Interior trim panels
Page 549 of 4264
CAB 10-41
REMOVAL AND INSTALLATION
This illustration is based on RHD model
RTW3A0LF001001
CREW CAB Model
Removal Steps
1. Interior trim panels
2. Sunvisor/Sunvisor holder
3. Spot light
4. Assist grip
5. Hole cover
6. Coat hook
7. Dome light
8. Headlining
Installation Steps
8. Headlining
7. Dome light
6. Coat hook
5. Hole cover
4. Assist grip
3. Spot light
2. Sunvisor/Sunvisor holder
1. Interior trim panels
Page 550 of 4264
10-42 CAB
Important Operations - Removal
1. Interior Trim Panels
Refer to Interior Trim Panels in this section.
2. Sunvisor/Sunvisor Holder
1) Remove the 2 screws fixing the sunvisor.
2) Remove the screw fixing the sunvisor holder.
3. Spot Light
Pull out the spot light and disconnect the connector.
4. Assist Grip
Remove the 2 fixing screw.
6. Coat Hook
Open the cover and remove the fixing screw.
7. Dome Light
1) Remove the dome light lens and the fixing screws.
2) Disconnect the dome light connector.
Page 551 of 4264
CAB 10-43
8. Headlining
Pull out the headlining with the retainer from roof rea
r
header panel as direction of shown in the illustration.
Note :
Remove steps (2-7) can be removed from the headlining in
any order.
Page 552 of 4264
10-44 CAB
INTERIOR TRIM PANELS
REMOVAL AND INSTALLATION
RTW3A0MF001301
EXTEND CAB Model
Removal Steps
1. Sill plate
2. Dash side trim cover
3. Front pillar trim cover
4. Rear upper cushion
5. Jack cover
6. Rear end trim cover
7. Rear speaker grille/Rear speaker
8. Body side rear lower trim cover
9. Door finisher
10. Tongue side seat belt
11. Body side rear upper trim cover
Installation Steps
11. Body side rear upper trim cover
10. Torque side seat belt
9. Door finisher
8. Body side rear lower trim cover
7. Rear speaker grille/Rear speaker
6. Rear end trim cover
5. Jack cover
4. Rear upper cushion
3. Front pillar trim assembly
2. Dash side trim cover
1. Sill plate