2006 DODGE RAM SRT-10 Service Repair Manual

Page 105 of 5267

DODGE RAM SRT-10 2006  Service Repair Manual 5.(K452) MDS SOLENOID NO.4 CONTROL CIRCUIT OPEN
CAUTION: Do not probe the PCM harness connectors. Probing the
PCM harness connectors will damage the PCM terminals resulting
in poor terminal to pin con

Page 106 of 5267

DODGE RAM SRT-10 2006  Service Repair Manual 7.MDS SOLENOID 4
Turn the ignition off.
Remove the Intake Manifold per Service Information.
Reconnect the Solenoid harness connector.
Turn the ignition on.
With the scan tool actuate the MDS Solenoid

Page 107 of 5267

DODGE RAM SRT-10 2006  Service Repair Manual P1416–CYLINDER 6 REACTIVATION CONTROL PERFORMANCE

Page 108 of 5267

DODGE RAM SRT-10 2006  Service Repair Manual For a complete wiring diagramRefer to Section 8W.
Theory of Operation
When all criteria has been met, power is supplied to each MDS Solenoid when the engine is making a transition
from 8 cylinder mode

Page 109 of 5267

DODGE RAM SRT-10 2006  Service Repair Manual 3.(Z42) GROUND CIRCUIT OPEN
Turn the ignition off.
Using a 12-volt test light connected to the 12-volts, probe the (Z42)
Ground circuit in the MDS Solenoid No.6 harness connector.
Does the test light

Page 110 of 5267

DODGE RAM SRT-10 2006  Service Repair Manual 5.(K453) MDS SOLENOID NO.6 CONTROL CIRCUIT OPEN
CAUTION: Do not probe the PCM harness connectors. Probing the
PCM harness connectors will damage the PCM terminals resulting
in poor terminal to pin con

Page 111 of 5267

DODGE RAM SRT-10 2006  Service Repair Manual 7.MDS SOLENOID 6
Turn the ignition off.
Remove the Intake Manifold per Service Information.
Reconnect the Solenoid connector.
Turn the ignition on.
With the scan tool actuate the MDS Solenoid 6.
Can y

Page 112 of 5267

DODGE RAM SRT-10 2006  Service Repair Manual P1417–CYLINDER 7 REACTIVATION CONTROL PERFORMANCE