Page 4649 of 5267
INSTALLATION
NOTE: A mixture of soap and water may be used
to aid installation of the weatherstrip into the cor-
ners.
1. Position the front door glass run weatherstrip (2)
into the door (5) through the window opening.
2. Position the weatherstrip into the upper corners
and seat firmly.
3. From back to front, seat the weatherstrip between
the corners and then down the sides firmly.
4. Install the door glass (Refer to 23 - BODY/DOOR -
FRONT/DOOR GLASS - INSTALLATION).
Page 4650 of 5267
FRONT DOOR OUTER BELT MOLDING
REMOVAL
1. Remove the screw (4) and separate the belt mold-
ing (1) from the door (5) flange from the back to
the front.
INSTALLATION
1. Position the belt molding (1) onto the door (5)
flange and seat fully.
2. Install the screw (4).
Page 4651 of 5267
FRONT DOOR INNER BELT MOLDING
REMOVAL
1. Remove the door trim panel (3) (Refer to 23 -
BODY/DOOR - FRONT/TRIM PANEL - REMOVAL)
2. Separate the belt molding (1) from the door (3)
mounting flange from the back to the front.
INSTALLATION
1. Position the belt molding (1) and seat onto the door
(3) mounting flange fully.
Page 4652 of 5267
2. Install the door trim panel (3) (Refer to 23 - BODY/
DOOR - FRONT/TRIM PANEL - INSTALLATION).
Page 4653 of 5267
REAR DOOR GLASS RUN WEATHERSTRIP
REMOVAL
1. Lower the glass.
2. Separate the rear door glass run weatherstrip (5)
out of the door frame (2) and remove through the
window opening.
INSTALLATION
NOTE: A mixture of soap and water may be used
to aid installation of the weatherstrip into the cor-
ners.
1. Position the rear door glass run weatherstrip (5)
into the door (2) through the window opening.
2. Position the weatherstrip (5) into the upper corners
and seat firmly.
3. From back to front, seat the weatherstrip (5)
between the corners and then down the sides
firmly.
Page 4654 of 5267
REAR DOOR OUTER BELT MOLDING
REMOVAL
1. Remove the screw (3) and separate the belt mold-
ing (1) from the door (2) flange from the back to
the front.
INSTALLATION
1. Position the belt molding (1) onto the door (2)
flange and seat fully.
2. Install the screw (3).
Page 4655 of 5267
REAR DOOR INNER BELT MOLDING
REMOVAL
1. Remove the door trim panel (5) (Refer to 23 -
BODY/DOORS - REAR/TRIM PANEL - REMOVAL).
2. Separate the belt molding (2) from the rear door
mounting flange from the back to the front.
INSTALLATION
1. Position the belt molding (2) and seat onto the rear
door mounting flange fully.
Page 4656 of 5267
2. Install the door trim panel (5) (Refer to 23 - BODY/
DOORS - REAR/TRIM PANEL - INSTALLATION).