2006 DODGE RAM SRT-10 Service Repair Manual

Page 1113 of 5267

DODGE RAM SRT-10 2006  Service Repair Manual 6.PCM
NOTE: Before continuing, check the PCM harness connector terminals for corrosion, damage, or terminal
push out. Repair as necessary.
Using the schematics as a guide, inspect the wire harness and

Page 1114 of 5267

DODGE RAM SRT-10 2006  Service Repair Manual P0208-FUEL INJECTOR 8 CIRCUIT
For a complete wiring diagramRefer to Section 8W.

Page 1115 of 5267

DODGE RAM SRT-10 2006  Service Repair Manual When Monitored:
With battery voltage greater than 10.4 volts, the auto shutdown relay energized, injector pulse width less than
10ms, and engine speed less than 3000 rpm.
Set Condition:
This trouble c

Page 1116 of 5267

DODGE RAM SRT-10 2006  Service Repair Manual 3.FUEL INJECTOR
Using a 12-volt test light connected to 12-volts, probe the (K28) Injector
Control No.8 circuit.
With the scan tool, actuate the No.8 Fuel Injector.
What is the state of the test light

Page 1117 of 5267

DODGE RAM SRT-10 2006  Service Repair Manual 6.PCM
NOTE: Before continuing, check the PCM harness connector terminals for corrosion, damage, or terminal
push out. Repair as necessary.
Using the schematics as a guide, inspect the wire harness and

Page 1118 of 5267

DODGE RAM SRT-10 2006  Service Repair Manual P0209-FUEL INJECTOR 9 CIRCUIT
For a complete wiring diagramRefer to Section 8W.

Page 1119 of 5267

DODGE RAM SRT-10 2006  Service Repair Manual When Monitored:
With battery voltage greater than 10.4 volts, the auto shutdown relay energized, injector pulse width less than
10ms, and engine speed less than 3000 rpm.
Set Condition:
This trouble c

Page 1120 of 5267

DODGE RAM SRT-10 2006  Service Repair Manual 3.FUEL INJECTOR
Using a 12-volt test light connected to 12-volts, probe the (K115) Injec-
tor Control No.9 circuit.
With the scan tool, actuate the No.9 Fuel Injector.
What is the state of the test li