Page 2169 of 4500
Fig. 129: Applying Seal Packing To Differential Carrier
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
d. Install the differential carrier cover with the 8 bolts.
Torque: 47 N.m (475 kgf.cm, 35 ft.lbf)
e. Install the rear differential breather plug.
Torque: 21 N.m (210 kgf.cm, 15 ft.lbf)
Page 2170 of 4500
Fig. 130: Installing Differential Carrier Cover
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
60.INSTALL REAR DIFFERENTIAL MOUNT CUSHION NO.1
a. This procedure is required only when replacing the rear differential mount.
b. Using SST, install the rear differential mount.
SST 09570-24010, 09316-12010
Page 2171 of 4500
Fig. 131: Installing Rear Differential Mount
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
Page 2172 of 4500
Fig. 132: Identifying Rear Differential Mount Direction Mark
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
61.INSTALL REAR DIFFERENTIAL MOUNT CUSHION NO.2
a. This procedure is required only when replacing the rear differential mount.
b. Using SST, install the rear differential mount.
SST 09570-24010, 09316-12010
Page 2173 of 4500
Fig. 133: Installing Rear Differential Mount
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
62.INSTALL DIFFERENTIAL CARRIER ASSY REAR
a. Install the 2 upper mount stoppers on the rear differential carrier assembly.
HINT:
Use the upper mount stopper which was removed.
Page 2174 of 4500
Fig. 134: Identifying Rear Differential Mount Direction Mark
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b. Support the rear differential carrier assembly with a jack and wooden block.
c. Temporally install the lower mount stoppers and 2 new front side set bolts.
Page 2175 of 4500
Fig. 135: Installing Lower Mount Stoppers And Front Side Set Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
d. Using a hexagon wrench (12 mm), install the 3 rear side set hexagon bolts.
Torque: 142 N.m (1,450 kgf.cm, 105 ft.lbf)
e. Torque the 2 front side set bolts.
Torque: 105 N.m (1,065 kgf.cm, 77 ft.lbf)
f. Lower the
jack.
Page 2176 of 4500
Fig. 136: Installing Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
63.INSTALL HEIGHT CONTROL VALVE SUB-ASSY NO.2 (W/ AIR SUSPENSION) (SEE
REPLACEMENT
)
HINT:
Perform this operation only when the rear differential mount cushion is replaced.
64.INSTALL STABILIZER BAR REAR (SEE REPLACEMENT
)
HINT:
Perform this operation only when the rear differential mount cushion is replaced.
65.INSTALL REAR DIFFERENTIAL DRAIN PLUG
a. Using a hexagon wrench (10 mm), install the drain plug with a new gasket.
Torque: 49 N.m (500 kgf.cm, 36 ft.lbf)
66.ADD DIFFERENTIAL OIL