Page 2377 of 4500
Fig. 71: Removing Rear Drive Shaft Assy LH
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
17.INSPECT REAR DRIVE SHAFT ASSY LH
a. Check that there is no excessive play in the outboard joint.
b. Check if the inboard joint slides smoothly in the thrust direction.
c. Check that there is no excessive play in the radial direction of the inboard joint.
d. Check the boots for damage.
18.INSTALL REAR DRIVE SHAFT ASSY LH
a. Coat the spline of the inboard joint shaft assy with gear oil.
b. Align the shaft splines, install the drive shaft assy LH with a brass bar and a hammer.
HINT:
Page 2378 of 4500
Whether the inboard joint shaft is in contact with the pinion shaft or not can be known from the
sound or feeling when driving it in.
c. Install the drive shaft assy LH to the rear axle assy LH.
Fig. 72: Installing Rear Drive Shaft Assy LH To Rear Axle Assy LH
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
19.TEMPORARILY TIGHTEN UPPER CONTROL ARM ASSY REAR LH
a. Temporarily tighten the upper control arm assy LH with a new nut.
Page 2379 of 4500
Fig. 73: Identifying Upper Control Arm Assy Rear LH Nut
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
20.INSTALL SHOCK ABSORBER ASSY REAR LH
a. Install the shock absorber assy LH with the new nut.
Torque: 70 N.m (714 kgf.cm, 52 ft.lbf)
Page 2380 of 4500
<0029004c004a00110003001a0017001d0003002c0047004800510057004c0049005c004c0051004a00030036004b00520046004e0003002400450056005200550045004800550003002400560056005c000300350048004400550003002f002b0003003100
580057[
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
21.INSTALL REAR SUSPENSION ARM ASSY NO. 2 LH
a. Install the rear suspension arm assy No.2 LH with the new nut.
Torque: 70 N.m (714 kgf.cm, 52 ft.lbf)
Page 2381 of 4500
Fig. 75: Identifying Rear Suspension Arm Assy No. 2 LH Nut
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
22.INSTALL TOE CONTROL LINK SUB-ASSY LH
a. Install the toe control link assy LH with the new nut.
Torque: 50 N.m (510 kgf.cm, 37 ft.lbf)
Page 2382 of 4500
Fig. 76: Installing Toe Control Link Sub-Assy LH Nut
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
23.FULLY TIGHTEN UPPER CONTROL ARM ASSY REAR LH
a. Support the rear axle carrier.
b. Fully tighten the upper control arm assy LH with the nut.
Torque: 70 N.m (714 kgf.cm, 52 ft.lbf)
24.INSTALL REAR DISC (See step 16 on OVERHAUL
)
Page 2383 of 4500
<0029004c004a00110003001a001a001d00030037004c004a004b005700480051004c0051004a0003003800530053004800550003002600520051005700550052004f00030024005500500003002400560056005c000300350048004400550003002f002b00
03003100580057[
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
25.INSTALL REAR DISC BRAKE CALIPER ASSY LH
a. Install the brake caliper with the 2 bolts.
Torque: 78 N.m (800 kgf.cm, 58 ft.lbf)
Page 2384 of 4500
Fig. 78: Installing Rear Disc Brake Caliper Assy LH Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
26.INSTALL SPEED SENSOR REAR LH
a. Install the speed sensor to the rear axle carrier with the bolt.
Torque: 8.0 N.m (82 kgf.cm, 71 in.lbf)