Page 3865 of 4179
CAN SYSTEM (TYPE 5)
LAN-87
[CAN]
C
D
E
F
G
H
I
J
L
MA
B
LAN
Wiring Diagram — CAN —EKS00FWI
TKWB0114E
Page 3866 of 4179
LAN-88
[CAN]
CAN SYSTEM (TYPE 5)
TKWB0115E
Page 3867 of 4179
![NISSAN X-TRAIL 2003 Service Repair Manual CAN SYSTEM (TYPE 5)
LAN-89
[CAN]
C
D
E
F
G
H
I
J
L
MA
B
LAN
Work FlowEKS00FWJ
1. Print all the data of “SELF-DIAG RESULTS” for “ENGINE”, “A/T”, “ABS” and “ALL MODE AWD/4WD” dis-
NISSAN X-TRAIL 2003 Service Repair Manual CAN SYSTEM (TYPE 5)
LAN-89
[CAN]
C
D
E
F
G
H
I
J
L
MA
B
LAN
Work FlowEKS00FWJ
1. Print all the data of “SELF-DIAG RESULTS” for “ENGINE”, “A/T”, “ABS” and “ALL MODE AWD/4WD” dis-](/manual-img/5/57404/w960_57404-3866.png)
CAN SYSTEM (TYPE 5)
LAN-89
[CAN]
C
D
E
F
G
H
I
J
L
MA
B
LAN
Work FlowEKS00FWJ
1. Print all the data of “SELF-DIAG RESULTS” for “ENGINE”, “A/T”, “ABS” and “ALL MODE AWD/4WD” dis-
played on CONSULT-II.
2. Print all the data of “CAN DIAG SUPPORT MNTR” for “ENGINE”, “A/T”, “ABS” and “ALL MODE AWD/
4WD” displayed on CONSULT-II.
3. Attach the printed sheet of “SELF-DIAG RESULTS” and “CAN DIAG SUPPORT MNTR” onto the check
sheet. Refer to LAN-90, "
CHECK SHEET" .
4. Based on the “CAN DIAG SUPPORT MNTR” results, put marks “v” onto the items with “NG” or “UNKWN”
in the check sheet table. Refer to LAN-90, "
CHECK SHEET" .
NOTE:
If a check mark is put on “NG” on “INITIAL DIAG (Initial diagnosis)”, replace the control unit.
The “CAN DIAG SUPPORT MNTR” items, which are not in check sheet table, are not related to diag-
nostic procedure on service manual.
So it is not necessary to check the status of the “CAN DIAG SUPPORT MNTR” items not in check
sheet table.
5. According to the check sheet results (example), start inspection. Refer to LAN-91, "
CHECK SHEET
RESULTS (EXAMPLE)" .
PKIA8260E
PKIA8343E
Page 3868 of 4179
LAN-90
[CAN]
CAN SYSTEM (TYPE 5)
CHECK SHEET
NOTE:
If a check mark is put on “NG” on “INITIAL DIAG (Initial diagnosis)”, replace the control unit.
PKIA9622E
Page 3869 of 4179
CAN SYSTEM (TYPE 5)
LAN-91
[CAN]
C
D
E
F
G
H
I
J
L
MA
B
LAN
CHECK SHEET RESULTS (EXAMPLE)
NOTE:
If a check mark is put on “NG” on “INITIAL DIAG (Initial diagnosis)”, replace the control unit.
Case 1
Check harness between TCM and ESP/TCS/ABS control unit. Refer to LAN-99, "Between TCM and ESP/
TCS/ABS Control Unit Circuit Inspection" .
PKIA9623E
PKIA9642E
Page 3870 of 4179
LAN-92
[CAN]
CAN SYSTEM (TYPE 5)
Case 2
Check harness between ESP/TCS/ABS control unit and 4WD control unit. Refer to LAN-101, "Between ESP/
TCS/ABS Control Unit and 4WD Control Unit Circuit Inspection" .
PKIA9624E
PKIA9643E
Page 3871 of 4179
CAN SYSTEM (TYPE 5)
LAN-93
[CAN]
C
D
E
F
G
H
I
J
L
MA
B
LAN
Case 3
Check ECM circuit. Refer to LAN-103, "ECM Circuit Inspection" .
PKIA9625E
PKIA9644E
Page 3872 of 4179
LAN-94
[CAN]
CAN SYSTEM (TYPE 5)
Case 4
Check TCM circuit. Refer to LAN-104, "TCM Circuit Inspection" .
PKIA9626E
PKIA9645E