Page 5833 of 6020
CAB 10-75
JUMP SEAT (EXTEND CAB)
REMOVAL AND INSTALLATION
RTW 3A0MF001201
Removal Steps
1. Cover
2. Bolt
3. Jump seat assembly
4. Storage box
Installation Steps
4. Storage box
3. Jump seat assembly
▲ 2. Bolt
1. Cover
Important Operation - Installation
2. Bolt
Bolt Torque N⋅m (kgf ⋅m/lb ⋅ft)
40 (4.1 / 30)
BACK TO CHAPTER INDEX TO MODEL INDEXISUZU KB P190 2007
Page 5834 of 6020
10-76 CAB
FRONT SEAT BELT
REMOVAL AND INSTALLATION
(TONGUE SIDE SEAT BELT)
RTW 5A0LF001101
Removal Steps
1. Body side rear lower trim cover
2. Lower anchor bolt
▲ 3. Knob
▲ 4. Cover
▲ 5. Upper anchor bolt
6. Retractor fixing bolt
7. Body side rear upper trim cover
8. Adjustable shoulder anchor fixing bolt
Installation Steps
▲
8. Adjustable shoulder anchor fixing bolt
7. Body side rear upper trim cover
▲ 6. Retractor fixing bolt
▲ 5. Upper anchor bolt
4. Cover
3. Knob
▲ 2. Lower anchor bolt
1. Body side rear lower trim cover
BACK TO CHAPTER INDEX TO MODEL INDEXISUZU KB P190 2007
Page 5835 of 6020
CAB 10-77
Important Operations - Removal
3. Knob • Pull out the knob.
RTW 5A0SH000501
4. Cover
5. Upper Anchor Bolt • Remove the seat belt upper anchor bolt.
• Insert the blade of an ordinary screwdriver into the gap
between the D-ring back surface and the cover.
Carefully pry the D-ring latches open. Remove the cover.
Important Operations - Installation
8. Adjustable Shoulder Anchor Fixing Bolt
Bolt torque N⋅m (kgf ⋅m/lb ⋅ft)
40 (4.1 / 30)
6. Retractor Fixing Bolt
Bolt torque N⋅m (kgf ⋅m/lb ⋅ft)
40 (4.1 / 30)
5. Upper Anchor Bolt
Bolt torque N⋅m (kgf ⋅m/lb ⋅ft)
40 (4.1 / 30)
2. Lower Anchor Bolt
Bolt torque N⋅m (kgf ⋅m/lb ⋅ft)
40 (4.1 / 30)
BACK TO CHAPTER INDEX
TO MODEL INDEXISUZU KB P190 2007
Page 5836 of 6020
10-78 CAB
REMOVAL AND INSTALLATION
(BUCKLE SIDE SEAT BELT/CENTER SEAT BELT)
RTW 3A0MF000401
Removal Steps
▲ 1. Front seat assembly
▲ 2. Buckle side seat belt/center seat belt
Installation Steps
▲
2. Buckle side seat belt/center seat belt
▲ 1. Front seat assembly
BACK TO CHAPTER INDEX TO MODEL INDEXISUZU KB P190 2007
Page 5837 of 6020
CAB 10-79
Important Operations - Removal
1. Front Seat Assembly • Refer to Front Seat in this section.
RUW 7A0SH000201
2. Buckle Side Seat Belt/Center Seat Belt
• Remove the seat belt fixing screw and the warning
harness connector clip (Bucket seat model).
• Remove the seat belt fixing screws and the warning
harness connector clip (Bench seat model).
Important Operations - Installation
2. Buckle Side Seat Belt/Center Seat Belt • Tighten the seat belt fixing screws to the specified
torque.
Torque N ⋅m (kgf ⋅m/lb ⋅ft)
40 (4.1 / 30)
1. Front Seat Assembly • Tighten the seat assembly fixing bolts to the specified
torque.
Torque N ⋅m (kgf ⋅m/lb ⋅ft)
40 (4.1 / 30)
BACK TO CHAPTER INDEX TO MODEL INDEXISUZU KB P190 2007
Page 5838 of 6020
10-80 CAB
REAR SEAT BELT (CREW CAB)
REMOVAL AND INSTALLATION
(TONGUE SIDE SEAT BELT)
RTW 5A0LF001001
Removal Steps
1. Body side rear lower trim cover
2. Lower anchor bolt
▲ 3. Knob
▲ 4. Cover
▲ 5. Upper anchor bolt
6. Retractor fixing bolt
7. Body side rear upper trim cover
8. Adjustable shoulder anchor fixing bolt
Installation Steps
▲
8. Adjustable shoulder anchor fixing bolt
7. Body side rear upper trim cover
▲ 6. Retractor fixing bolt
▲ 5. Upper anchor bolt
4. Cover
3. Knob
▲ 2. Lower anchor bolt
1. Body side rear lower trim cover
BACK TO CHAPTER INDEX TO MODEL INDEXISUZU KB P190 2007
Page 5839 of 6020
CAB 10-81
Important Operations - Removal
3. Knob • Pull out the knob.
RTW 5A0SH000501
4. Cover
5. Upper Anchor Bolt • Remove the seat belt upper anchor bolt.
• Insert the blade of an ordinary screwdriver into the gap
between the D-ring back surface and the cover.
Carefully pry the D-ring latches open. Remove the cover.
Important Operations - Installation
8. Adjustable Shoulder Anchor Fixing Bolt
Bolt torque N⋅m (kgf ⋅m/lb ⋅ft)
40 (4.1 / 30)
6. Retractor Fixing Bolt
Bolt torque N⋅m (kgf ⋅m/lb ⋅ft)
40 (4.1 / 30)
5. Upper Anchor Bolt
Bolt torque N⋅m (kgf ⋅m/lb ⋅ft)
40 (4.1 / 30)
2. Lower Anchor Bolt
Bolt torque N⋅m (kgf ⋅m/lb ⋅ft)
40 (4.1 / 30)
BACK TO CHAPTER INDEX TO MODEL INDEXISUZU KB P190 2007
Page 5840 of 6020
10-82 CAB
REMOVAL AND INSTALLATION
(REAR CENTER SEAT BELT/REAR SEAT BELT BACKLE)
RTW 3A0LF000901
Removal Steps
1. Nut
2. Rear seat belt buckle
▲ 3. Cover
▲ 4. Rear end trim cover
5. Bolt
6. Rear center seat belt
Installation Steps
▲
6. Rear center seat belt
▲ 5. Bolt
4. Rear end trim cover
3. Cover
2. Rear seat belt buckle
▲ 1. Nut
BACK TO CHAPTER INDEX TO MODEL INDEXISUZU KB P190 2007