Page 5521 of 6020
ELECTRICAL-BODY AND CHASSIS 8A-583
RTW 38DLH000201
BACK TO CHAPTER INDEX TO MODEL INDEXISUZU KB P190 2007
Page 5522 of 6020
8A-584 ELECTRICAL-BODY AND CHASSIS
RTW 38DLH000101
Menu
The left table shows witch functions are used for the
available equipment versions.
NOTE: Marked items are not applied for keyless entry
system.
DTC
On OBD has three options available in the Tech-2
DTC mode to display the enhanced information
available.
• Read DTC Info Ordered By Priority.
• Read DTC Info As Stored By ECU.
• Clear DTC and Alarm Code Info.
Clear DTC Information
To clear Diagnostic Trouble Codes (DTCs), Use the
diagnostic scan tool “Clear DTC Information” function.
Tech-2 Data Display
The Tech-2 data values represent values that would
be seen on a normally-keyless entry system.
RTW 38DSH001601
Actuator Test
Unlock/Lock Test
Check whether opening and closing of a door lock
can be performed by operation of Tech-2.
1. Turn the key “OFF”.
2. Turn the key “ON”.
3. Check the display and test menu.
4. Operate the Tech-2.
BACK TO CHAPTER INDEX TO MODEL INDEXISUZU KB P190 2007
Page 5523 of 6020
ELECTRICAL-BODY AND CHASSIS 8A-585
RTW 38DSH001701
Turn Signal Test
Check the turn signal lamp lights up by operation of
Tech-2.
1. Turn the key “OFF”.
2. Turn the key “ON”.
3. Check the display and test menu.
4. Operate the Tech-2.
060R200289
Programming
Erase Remove Key
To erase remove control key code in the control unit.
1. Check the display of Tech-2 and press “Confirm”
key.
RTW 38DSH001001
2. Enter security code.
3. Press “Not Okay” or “Okay” key.
BACK TO CHAPTER INDEX TO MODEL INDEXISUZU KB P190 2007
Page 5524 of 6020
8A-586 ELECTRICAL-BODY AND CHASSIS
RTW 38DSH001101
4. Check the display of Tech-2 and press “Confirm”
key.
RTW 38DSH001201
5. Check the display of Tech-2 and press “Confirm”
key.
060R200289
Program Remote Key
To program remote control key code in the control
unit.
1. Check the display of Tech-2 and press “Confirm”
key.
BACK TO CHAPTER INDEX TO MODEL INDEXISUZU KB P190 2007
Page 5525 of 6020
ELECTRICAL-BODY AND CHASSIS 8A-587
RTW 38DSH001301
2. Check the following table in the display of Tech-2.
3. Operate the remote key.
RTW 38DSH001401
4. Check the display of Tech-2 and press “Confirm”
key.
RTW 38DSH001501
5. Check the display of Tech-2 and press “No” or
“Yes” key.
BACK TO CHAPTER INDEX TO MODEL INDEXISUZU KB P190 2007
Page 5526 of 6020
8A-588 ELECTRICAL-BODY AND CHASSIS
KEY INTER LOCK
PARTS LOCATION
RTW 78AXF041501 & RTW 78AXF047701
BACK TO CHAPTER INDEX TO MODEL INDEXISUZU KB P190 2007
Page 5527 of 6020
ELECTRICAL-BODY AND CHASSIS 8A-589
PARTS LOCATION
RTW 78AXF041601 & RTW 78AXF047801
BACK TO CHAPTER INDEX TO MODEL INDEXISUZU KB P190 2007
Page 5528 of 6020
8A-590 ELECTRICAL-BODY AND CHASSIS
CIRCUIT DIAGRAM HFV6
RTW 78AXF003201
BACK TO CHAPTER INDEX
TO MODEL INDEXISUZU KB P190 2007