Page 465 of 5598
BCS
COMBINATION SWITCH OUTPUT CIRCUITBCS-77
< DTC/CIRCUIT DIAGNOSIS >
C
DE
F
G H
I
J
K L
B A
O P
N
YES >> Replace combination switch.
NO >> Replace BCM. Refer to
BCS-81, "
Removal and Installation".
Revision: 2010 May2011 QX56
Page 466 of 5598

BCS-78
< DTC/CIRCUIT DIAGNOSIS >
COMBINATION SWITCH INPUT CIRCUIT
COMBINATION SWITCH INPUT CIRCUIT
Diagnosis ProcedureINFOID:0000000006274843
1.CHECK INPUT 1 - 5 CIRCUIT FOR OPEN
1. Turn ignition switch OFF.
2. Disconnect BCM and combination switch connectors.
3. Check continuity between BCM harness connector and combination switch harness connector.
Does continuity exist?
YES >> GO TO 2.
NO >> Repair harnesses or connectors.
2.CHECK INPUT 1 - 5 CIRCUIT FOR SHORT
Check for continuity between BCM harness connector and ground.
Does continuity exist?
YES >> Repair harnesses or connectors.
NO >> GO TO 3.
3.CHECK BCM INPUT SIGNAL
1. Connect BCM and combination switch connectors.
2. Turn ON any switch in the system that is malfunction.
3. Check voltage between BCM harness connector and ground.
Is the measurement value normal?
Yes >> Replace BCM. Refer to BCS-81, "Removal and Installation".
SystemBCM Combination switch
Continuity
Connector Terminal Connector Terminal
INPUT 1
M686
M27 12
Existed
INPUT 2 5 14
INPUT 3 4 5
INPUT 4 3 2
INPUT 5 2 8
System
BCM
GroundContinuity
Connector Terminal
INPUT 1
M686
Not existed
INPUT 2 5
INPUT 3 4
INPUT 4 3
INPUT 5 2
System Te r m i n a l s
Vo l ta g e
(Approx.)
(+) (
−)
BCM
Ground
Connector Terminal
INPUT 1
M686
Refer to BCS-
33, "Refer-
ence Value".
INPUT 2 5
INPUT 3 4
INPUT 4 3
INPUT 5 2
Revision: 2010 May2011 QX56
Page 467 of 5598
BCS
COMBINATION SWITCH INPUT CIRCUITBCS-79
< DTC/CIRCUIT DIAGNOSIS >
C
DE
F
G H
I
J
K L
B A
O P
N
No >> Replace combination switch.
Revision: 2010 May2011 QX56
Page 468 of 5598

BCS-80
< SYMPTOM DIAGNOSIS >
COMBINATION SWITCH SYSTEM SYMPTOMS
SYMPTOM DIAGNOSIS
COMBINATION SWITCH SYSTEM SYMPTOMS
Symptom TableINFOID:0000000006274844
1. Perform “Data Monitor” of CONSULT-II I to check for any malfunctioning item.
2. Check the malfunction combinations.
Malfunction item: ×
3. Identify the malfunctioning part from the agreed combination and repair or replace the part.
Data monitor item
Malfunc-
tion com-
bination
FR WIPER HI
FR WIPER LOW
FR WASHER SW
FR WIPER INT
RR WIPER ON
RR WIPER INT
RR WASHER SW INT VOLUME
TURN SIGNAL R TURN SIGNAL L TAIL LAMP SW
HI BEAM SW
HEAD LAMP SW 1
HEAD LAMP SW 2 PASSING SW
AUTO LIGHT SW
FR FOG SW
×× ×× A
×× ×× B
×× × × C
×× × × D
×× × E
××× F
×××× G
×× ×H
×××× I
× ××× J
All Items K
If only one item is detected or the item is not applicable to the combinations A to K L
Malfunction
combination Malfunctioning part Repair or replace
A Combination switch OUTPUT 1 circuit
Inspect the combination switch output circuit applicable to the malfunction-
ing part. Refer to BCS-76, "
Diagnosis Procedure".
B Combination switch OUTPUT 2 circuit
C Combination switch OUTPUT 3 circuit
D Combination switch OUTPUT 4 circuit E Combination switch OUTPUT 5 circuitF Combination switch INPUT 1 circuit
Inspect the combination switch input circuit applicable to the malfunctioning
part. Refer to BCS-78, "
Diagnosis Procedure".
G Combination switch INPUT 2 circuit
H Combination switch INPUT 3 circuit I Combination switch INPUT 4 circuit
J Combination switch INPUT 5 circuit
K BCM Replace BCM. Refer to BCS-81, "
Removal and Installation".
L Combination switch Replace combination switch.
Revision: 2010 May2011 QX56
Page 469 of 5598
BCS
BCM
BCS-81
< REMOVAL AND INSTALLATION >
C
D E
F
G H
I
J
K L
B A
O P
N
REMOVAL AND INSTALLATION
BCM
Removal and InstallationINFOID:0000000006274845
CAUTION:
Before replacing BCM, perform “READ CONFIGURAT
ION” to save or print current vehicle specifica-
tion. Refer to BCS-67, "
ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT (BCM) : Descrip-
tion".
REMOVAL
1. Remove combination meter. Refer to MWI-85, "Removal and Installation".
2. Remove bolts.
3. Remove BCM and disconnect the connectors.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Be sure to perform “WRITE CO NFIGURATION” when replacing BCM.
Be sure to perform the system initializa tion (IVIS) when replacing BCM. Refer to BCS-67, "
ADDI-
TIONAL SERVICE WHEN REPLACING CO NTROL UNIT (BCM) : Work Procedure".
Revision: 2010 May2011 QX56
Page 470 of 5598
BCS-82
< REMOVAL AND INSTALLATION >
COMBINATION SWITCH
COMBINATION SWITCH
Exploded ViewINFOID:0000000006274846
Removal and InstallationINFOID:0000000006274847
REMOVAL
1. Remove steering column cover. Refer to IP-13, "Exploded View".
2. Remove screws.
3. Disconnect the connector.
4. Pull up the combination switch to remove it.
INSTALLATION
Install in the reverse order of removal.
1. Combination switch 2. Combination switch connector
JMMIA0328ZZ
Revision: 2010 May2011 QX56
Page 471 of 5598

BR-1
BRAKES
C
DE
G H
I
J
K L
M
SECTION BR
A
B
BR
N
O P
CONTENTS
BRAKE SYSTEM
PRECAUTION ................ ...............................3
PRECAUTIONS .............................................. .....3
Precaution for Supplemental Restraint System
(SRS) "AIR BAG" and "SEAT BELT PRE-TEN-
SIONER" ............................................................. ......
3
Precaution Necessary for Steering Wheel Rota-
tion after Battery Disconnect .....................................
3
Precaution for Procedure without Cowl Top Cover ......4
Precaution for Brake system .....................................4
PREPARATION ............................................5
PREPARATION .............................................. .....5
Commercial Service Tools .................................. ......5
SYMPTOM DIAGNOSIS ...............................6
NOISE, VIBRATION AND HARSHNESS
(NVH) TROUBLESHOOTING ........................ .....
6
NVH Troubleshooting Chart ................................ ......6
PERIODIC MAINTENANCE ..........................7
BRAKE PEDAL .............................................. .....7
Inspection and Adjustment .................................. ......7
BRAKE FLUID ....................................................10
Inspection ............................................................ ....10
Draining ...................................................................10
Refilling ...................................................................11
Bleeding Brake System ...........................................11
HYDRAULIC BOOSTER ASSEMBLY ...............15
Inspection ............................................................ ....15
FRONT DISC BRAKE .................................... ....16
BRAKE PAD .......................................................... ....16
BRAKE PAD : Inspection and Adjustment ..............16
DISC ROTOR ......................................................... ....16
DISC ROTOR : Inspection and Adjustment ............16
REAR DISC BRAKE .........................................18
BRAKE PAD .......................................................... ....18
BRAKE PAD : Inspection and Adjustment ...............18
DISC ROTOR ......................................................... ....18
DISC ROTOR : Inspection and Adjustment .............18
REMOVAL AND INSTALLATION ...............20
BRAKE PEDAL ................................ .................20
Exploded View ..................................................... ....20
Removal and Installation .........................................20
Inspection and Adjustment ......................................21
BRAKE PIPING ................................ .................22
FRONT ................................................................... ....22
FRONT : Exploded View .........................................22
FRONT : Hydraulic Piping .......................................23
FRONT : Removal and Installation ..........................23
FRONT : Inspection .................................................24
REAR ..................................................................... ....24
REAR : Exploded View ............................................25
REAR : Hydraulic Piping ..........................................25
REAR : Removal and Installation ............................26
REAR : Inspection ...................................................26
HYDRAULIC BOOSTER ASSEMBLY ..............28
Exploded View .........................................................28
Removal and Installation .........................................29
Disassembly and Assembly .....................................30
Inspection and Adjustment ......................................32
Disposal ...................................................................33
FRONT DISC BRAKE .......................................34
BRAKE PAD .......................................................... ....34
BRAKE PAD : Exploded View .................................34
BRAKE PAD : Removal and Installation ..................34
BRAKE PAD : Inspection . ........................................36
Revision: 2010 May2011 QX56
Page 472 of 5598

BR-2
BRAKE CALIPER ASSEMBLY ................................36
BRAKE CALIPER ASSEMBLY : Exploded View ....36
BRAKE CALIPER ASSEMBLY : Removal and In-
stallation .................................................................
37
BRAKE CALIPER ASSEMBLY : Disassembly and
Assembly ................................................................
38
BRAKE CALIPER ASSEMBLY : Inspection ...........39
REAR DISC BRAKE ..........................................41
BRAKE PAD .......................................................... ...41
BRAKE PAD : Exploded View ................................41
BRAKE PAD : Removal and Installation .................41
BRAKE PAD : Inspection ........................................42
BRAKE CALIPER ASSEMBLY ............................. ...42
BRAKE CALIPER ASSEMBLY : Exploded View ....42
BRAKE CALIPER ASSEMBLY : Removal and In-
stallation ............................................................... ...
43
BRAKE CALIPER ASSEMBLY : Disassembly and
Assembly ................................................................
44
BRAKE CALIPER ASSEMBLY : Inspection ............45
SERVICE DATA AND SPECIFICATIONS
(SDS) .......... ................................................
47
SERVICE DATA AND SPECIFICATIONS
(SDS) .............................................................. ...
47
General Specification ........................................... ...47
Brake Pedal ............................................................47
Brake Booster .........................................................47
Front Disc Brake .....................................................47
Rear Disc Brake ......................................................47
Revision: 2010 May2011 QX56