Page 1793 of 5598
OUTSIDE KEY ANTENNADLK-257
< REMOVAL AND INSTALLATION >
C
DE
F
G H
I
J
L
M A
B
DLK
N
O P
OUTSIDE KEY ANTENNA
DRIVER SIDE
DRIVER SIDE : Remova l and InstallationINFOID:0000000006226122
REMOVAL
Remove the driver side outside handle. Refer to DLK-241, "OUTSIDE HANDLE : Removal and Installation".
INSTALLATION
Install in the reverse order of removal.
PASSENGER SIDE
PASSENGER SIDE : Removal and InstallationINFOID:0000000006226123
REMOVAL
Remove the passenger side outside handle. Refer to DLK-241, "OUTSIDE HANDLE : Removal and Installa-
tion".
INSTALLATION
Install in the reverse order of removal.
BACK DOOR
BACK DOOR : Removal and InstallationINFOID:0000000006226124
REMOVAL
Remove the back door finisher inner. Refer to INT-39, "Removal and Installation".
INSTALLATION
Install in the reverse order of removal.
Revision: 2010 May2011 QX56
Page 1794 of 5598
DLK-258
< REMOVAL AND INSTALLATION >
INTELLIGENT KEY WARNING BUZZER
INTELLIGENT KEY WARNING BUZZER
Removal and InstallationINFOID:0000000006226125
REMOVAL
Remove the Intelligent Key warning buzzer mounting bolt, and then remove the Intelligent Key warning
buzzer.
INSTALLATION
Install in the reverse order of removal.
Revision: 2010 May2011 QX56
Page 1795 of 5598
REMOTE KEYLESS ENTRY RECEIVERDLK-259
< REMOVAL AND INSTALLATION >
C
DE
F
G H
I
J
L
M A
B
DLK
N
O P
REMOTE KEYLESS ENTRY RECEIVER
Removal and InstallationINFOID:0000000006226126
REMOVAL
1. Remove the luggage side finisher. Refer to INT-38, "LUGGAGE SIDE UPPER FINISHER : Removal and
Installation".
2. Remove the remote keyless entry receiver mounting bolt, and then remove remote keyless entry receiver.
INSTALLATION
Install in the reverse order of removal.
Revision: 2010 May2011 QX56
Page 1796 of 5598
DLK-260
< REMOVAL AND INSTALLATION >
INTELLIGENT KEY BATTERY
INTELLIGENT KEY BATTERY
Removal and InstallationINFOID:0000000006226127
1. Release the lock knob at the back of the Intelligent Key and remove the mechanical key.
2. Insert a flat-blade screwdriver (A) wrapped with a cloth into the slit of the corner and twist it to separate the upper part from the
lower part.
CAUTION:
Do not touch the circuit board or battery terminal.
The key fob is water-resistant. However, if it does get wet,immediately wipe it dry.
3. Replace the battery with new one.
4. Align the tips of the upper and lower parts, and then push them together until it is securely closed.
CAUTION:
When replacing battery, keep dirt, grease, and other for-
eign materials off the electrode contact area.
After replacing the battery, check that all Intelligent Key
functions work normally.
PIIB6221E
Battery replacement :Coin-type lithium battery
(CR2025)
PIIB6222E
Revision: 2010 May2011 QX56
Page 1797 of 5598
BACK DOOR CONTROL UNITDLK-261
< REMOVAL AND INSTALLATION >
C
DE
F
G H
I
J
L
M A
B
DLK
N
O P
BACK DOOR CONTROL UNIT
Removal and InstallationINFOID:0000000006226128
REMOVAL
1. Remove the back door finisher inner. Refer to INT-39, "Removal and Installation".
2. Remove the back door control unit mounting bolts, and then remove back door control unit.
INSTALLATION
Install in the reverse order of removal.
Revision: 2010 May2011 QX56
Page 1798 of 5598
DLK-262
< REMOVAL AND INSTALLATION >
AUTOMATIC BACK DOOR CONTROL MODULE
AUTOMATIC BACK DOOR CONTROL MODULE
Removal and InstallationINFOID:0000000006226129
REMOVAL
1. Remove the luggage side finisher lower LHD. Refer to INT-36, "LUGGAGE SIDE LOWER FINISHER :
Removal and Installation".
2. Remove the automatic back door control unit bra cket mounting bolt and nats, and then remove the auto-
matic back door control unit bracket.
3. Remove the automatic back door control unit m ounting bolt, and then remove the automatic back door
control unit.
INSTALLATION
Install in the reverse order of removal.
NOTE:
After installing back door control unit, perform additional service when replace control unit. Refer to DLK-80,
"ADDITIONAL SERVICE WHEN REPLACING (AUTOMATIC BACK DOOR CONTROL MODULE) : Work Pro-
cedure".
Revision: 2010 May2011 QX56
Page 1799 of 5598
AUTOMATIC BACK DOOR WARNING BUZZERDLK-263
< REMOVAL AND INSTALLATION >
C
DE
F
G H
I
J
L
M A
B
DLK
N
O P
AUTOMATIC BACK DOOR WARNING BUZZER
Removal and InstallationINFOID:0000000006226130
REMOVAL
1. Remove the back door finisher inner. Refer to INT-39, "Removal and Installation".
2. Remove the automatic back door warning buzzer mounting nut, and then remove the automatic back door
warning buzzer.
INSTALLATION
Install in the reverse order of removal.
Revision: 2010 May2011 QX56
Page 1800 of 5598
DLK-264
< REMOVAL AND INSTALLATION >
AUTOMATIC BACK DOOR MAIN SWITCH
AUTOMATIC BACK DOOR MAIN SWITCH
Removal and InstallationINFOID:0000000006226131
REMOVAL
1. Remove the instrument driver lower panel LH. Refer to IP-14, "Removal and Installation".
2. Widen the pawl, and remove the automatic ba ck door main switch from switch bracket.
INSTALLATION
Install in the reverse order of removal.
Revision: 2010 May2011 QX56