Page 2945 of 4801
CLUSTER LID AIP-19
< REMOVAL AND INSTALLATION >
C
D E
F
G H
I
K L
M A
B
IP
N
O P
CLUSTER LID A
Removal and InstallationINFOID:0000000009461383
REMOVAL
1. Remove the instrument lower panel LH. Refer to IP-21, "Removal and Installation".
2. Remove the steering column upper cover. Refer to IP-17, "Removal and Installation"
.
3. Release cluster lid A pawls using a suitable tool. : Pawl
4. Remove cluster lid A.
INSTALLATION
Installation is in the reverse order of removal.
ALJIA0922ZZ
Revision: November 20132014 Altima NAM
Page 2946 of 4801

IP-20
< REMOVAL AND INSTALLATION >
CLUSTER LID C
CLUSTER LID C
Cluster Lid CINFOID:0000000009461384
REMOVAL
1. Remove the center stack side finishers (LH/RH). Refer to IP-14, "Exploded View".
2. Remove cluster lid C screws (A).
3. Disconnect the harness connector from cluster lid C and remove.
4. Remove the center ventilator grilles and hazard swit ch from cluster lid C, if necessary. Refer to VTL-11,
"CENTER VENTILATOR GRILLE : Removal and Installation" (CENTER VENTILATOR GRILLES) and
EXL-140, "Removal and Installation"
(HAZARD SWITCH).
INSTALLATION
Installation is in the reverse order of removal.
Cluster Lid C LowerINFOID:0000000009461385
REMOVAL
1. Remove the instrument lower panel LH. Refer to IP-21, "Removal and Installation".
2. Remove the center stack side finishers (LH/RH). Refer to IP-14, "Exploded View"
.
3. Release cluster lid C lower metal clips and pawls. : Metal clip
: Pawl
4. Disconnect the harness connector from cluster lid C lower.
5. Remove cluster lid C lower.
INSTALLATION
Installation is in the reverse order of removal.
ALJIA0923ZZ
ALJIA0924ZZ
Revision: November 20132014 Altima NAM
Page 2947 of 4801
INSTRUMENT LOWER PANEL LHIP-21
< REMOVAL AND INSTALLATION >
C
D E
F
G H
I
K L
M A
B
IP
N
O P
INSTRUMENT LOWER PANEL LH
Removal and InstallationINFOID:0000000009461386
REMOVAL
1. Remove the instrument side finisher (LH) (1) using a suitable tool.
2. Remove the hood lock/fuel filler door release handle assembly from the instrument lower panel LH. Refer to DLK-175, "HOOD LOCK CONTRO L : Component Parts Location"
.
3. Release the instrument lower panel LH metal clips and pawls using a suitable tool.
: Metal clip
: Pawl
4. Disconnect the harness connectors from the instrument lower panel LH.
5. Remove the aspirator hose from the instrument lower panel LH.
6. Remove the instrument lower panel LH.
INSTALLATION
Installation is in the reverse order of removal.
ALJIA0018ZZ
ALJIA0925ZZ
Revision: November 20132014 Altima NAM
Page 2948 of 4801
IP-22
< REMOVAL AND INSTALLATION >
GLOVE BOX ASSEMBLY
GLOVE BOX ASSEMBLY
Removal and InstallationINFOID:0000000009461387
REMOVAL
1. Remove the instrument side finisher RH using a suitable tool.
2. Remove the glove box assembly (1) upper screws (A).
3. Remove the glove box assembly lower screws (A).
4. Disconnect the harness connectors from the trunk switch and glove box lamp, then remove the glove box assembly.
INSTALLATION
Installation is in the reverse order of removal.
ALJIA0020ZZ
ALJIA0021ZZ
Revision: November 20132014 Altima NAM
Page 2949 of 4801

CENTER CONSOLE ASSEMBLYIP-23
< UNIT DISASSEMBLY AND ASSEMBLY >
C
D E
F
G H
I
K L
M A
B
IP
N
O P
UNIT DISASSEMBLY AND ASSEMBLY
CENTER CONSOLE ASSEMBLY
Exploded ViewINFOID:0000000009461388
Disassembly and AssemblyINFOID:0000000009461389
DISASSEMBLY
1. Remove the center console assembly. Refer to IP-18, "Removal and Installation".
2. Remove the center console upper side finishers (LH/RH) using a suitable tool.
3. Remove the CVT shift selector finisher using a suitable tool.
4. Release the center console tray using a suit able tool, then remove the center console tray.
5. Release the heated seat switch finisher using a suitable tool.
6. Disconnect the harness connectors from the heated seat switch finisher and remove.
7. Remove the power sockets from the center console assembly. Refer to PWO-6, "Removal and Installa-
tion".
8. Remove the USB connector (if equipped) from the center console assembly. Refer to AV-419, "Removal
and Installation".
9. Release the center console rear finisher metal clips and pawls using a suitable tool.
10. Disconnect the harness connector from the c enter console rear finisher and remove.
11. Remove the center console lid hinge bol ts, then remove the center console lid.
ASSEMBLY
Assembly is in the reverse order of disassembly.
1. Center console side finisher (RH) 2. Center console side finisher (LH) 3. Center console upper side finisher (LH)
4. Center console assembly 5. Center console rear finisher 6. Center console lid
7. Center console tray 8. CVT shift selector finisher 9. Heated seat switch finisher
10. Heated seat switch finisher pad 11. Storage bin 12. Center console upper side finisher (RH)
ALJIA0926ZZ
Revision: November 20132014 Altima NAM
Page 2950 of 4801

LAN
LAN-1
ELECTRICAL & POWER CONTROL
C
D E
F
G H
I
J
K L
B
SECTION LAN
A
O P
N
CONTENTS
LAN SYSTEM
CAN FUNDAMENTAL
HOW TO USE THIS MANU AL ......................
7
HOW TO USE THIS SECTION ....................... .....7
Information .......................................................... ......7
PRECAUTION ...............................................8
PRECAUTIONS .............................................. .....8
Precautions for Trouble Diagnosis ...................... ......8
Precautions for Harness Repair ................................8
SYSTEM DESCRIPTION . .............................9
SYSTEM ......................................................... .....9
CAN COMMUNICATION SYSTEM .............................9
CAN COMMUNICATION SYSTEM : System De-
scription ............................................................... ......
9
DIAG ON CAN ....................................................... ......9
DIAG ON CAN : System Description ........................9
TROUBLE DIAGNOSIS .....................................11
Component Description ....................................... ....11
Condition of Error Detection ....................................11
Symptom When Error Occurs in CAN Communi-
cation System ...................................................... ....
12
CAN Diagnosis with CONSULT ..............................14
Self-Diagnosis .........................................................15
CAN Diagnostic Support Monitor ............................15
How to Use CAN Communication Signal Chart ......17
BASIC INSPECTION ...................................18
DIAGNOSIS AND REPAIR WORKFLOW ..... ....18
Trouble Diagnosis Flow Chart ............................. ....18
Trouble Diagnosis Procedure ..................................18
CAN
HOW TO USE THIS MANU AL .....................
23
HOW TO USE THIS SECTION .........................23
Information ........................................................... ....23
Abbreviation List ......................................................23
PRECAUTION ..............................................24
PRECAUTIONS .................................................24
Precaution for Supplemental Restraint System
(SRS) "AIR BAG" and "SEAT BELT PRE-TEN-
SIONER" ............................................................. ....
24
Precautions for Trouble Diagnosis ..........................24
Precautions for Harness Repair ..............................24
SYSTEM DESCRIPTION .............................26
COMPONENT PARTS ......................................26
Component Parts Location .................................. ....26
SYSTEM ............................................................27
CAN COMMUNICATION SYSTEM ........................ ....27
CAN COMMUNICATION SYSTEM : System De-
scription ............................................................... ....
27
CAN COMMUNICATION SYSTEM : CAN Com-
munication Control Circuit ................................... ....
30
CAN COMMUNICATION SYSTEM : CAN System
Specification Chart .............................................. ....
31
CAN COMMUNICATION SYSTEM : CAN Com-
munication Signal Chart ...................................... ....
32
WIRING DIAGRAM ......................................36
CAN SYSTEM .. ................................ .................36
Wiring Diagram .................................................... ....36
BASIC INSPECTION ...................................42
DIAGNOSIS AND REPAIR WORKFLOW ........42
Interview Sheet .................................................... ....42
DTC/CIRCUIT DIAGNOSIS .........................43
MALFUNCTION AREA CHART ........................43
Revision: November 20132014 Altima NAMRevision: November 20132014 Altima NAM
Page 2951 of 4801

LAN-2
Main Line ................................................................43
Branch Line ............................................................43
Short Circuit ............................................................43
MAIN LINE BETWEEN IPDM-E AND DLC
CIRCUIT .......................................................... ...
44
Diagnosis Procedure ........................................... ...44
MAIN LINE BETWEEN DLC AND M&A CIR-
CUIT ................................................................ ...
45
Diagnosis Procedure ........................................... ...45
MAIN LINE BETWEEN M&A AND A-BAG
CIRCUIT (WITH AUTO A/C) ........................... ...
46
Diagnosis Procedure ........................................... ...46
MAIN LINE BETWEEN M&A AND A-BAG
CIRCUIT (WITH MANUAL A/C) ..................... ...
47
Diagnosis Procedure ........................................... ...47
MAIN LINE BETWEEN A-BAG AND HVAC
CIRCUIT .......................................................... ...
48
Diagnosis Procedure ........................................... ...48
ECM BRANCH LINE CIRCUIT ..........................49
Diagnosis Procedure ........................................... ...49
ABS BRANCH LINE CIRCUIT ..........................50
Diagnosis Procedure ........................................... ...50
EPS BRANCH LINE CIRCUIT ...........................51
Diagnosis Procedure ........................................... ...51
IPDM-E BRANCH LINE CIRCUIT .....................52
Diagnosis Procedure ........................................... ...52
TCM BRANCH LINE CIRCUIT ..........................53
Diagnosis Procedure ........................................... ...53
DLC BRANCH LINE CIRCUIT ...........................54
Diagnosis Procedure ........................................... ...54
M&A BRANCH LINE CIRCUIT ..........................55
Diagnosis Procedure ........................................... ...55
STRG BRANCH LINE CIRCUIT ........................56
Diagnosis Procedure ........................................... ...56
A-BAG BRANCH LINE CIRCUIT ......................57
Diagnosis Procedure ........................................... ...57
AV BRANCH LINE CIRCUIT .............................58
Diagnosis Procedure ........................................... ...58
AVM BRANCH LINE CIRCUIT ..........................59
Diagnosis Procedure ........................................... ...59
HVAC BRANCH LINE CIRCUIT ........................60
Diagnosis Procedure ........................................... ...60
BCM BRANCH LINE CIRCUIT ..........................61
Diagnosis Procedure ........................................... ...61
CAN COMMUNICATION CIRCUIT ...................62
Diagnosis Procedure ............................................ ...62
CAN SYSTEM (TYPE 1)
DTC/CIRCUIT DIAGNOSIS ........................
64
MAIN LINE BETWEEN IPDM-E AND DLC
CIRCUIT .......................................................... ...
64
Diagnosis Procedure ............................................ ...64
MAIN LINE BETWEEN DLC AND M&A CIR-
CUIT ................................................................ ...
65
Diagnosis Procedure ............................................ ...65
MAIN LINE BETWEEN M&A AND A-BAG
CIRCUIT (WITH MANUAL A/C) ..................... ...
66
Diagnosis Procedure ............................................ ...66
ECM BRANCH LINE CIRCUIT ..........................67
Diagnosis Procedure ............................................ ...67
ABS BRANCH LINE CIRCUIT ..........................68
Diagnosis Procedure ............................................ ...68
EPS BRANCH LINE CIRCUIT ...........................69
Diagnosis Procedure ............................................ ...69
IPDM-E BRANCH LINE CIRCUIT .....................70
Diagnosis Procedure ............................................ ...70
TCM BRANCH LINE CIRCUIT ..........................71
Diagnosis Procedure ............................................ ...71
DLC BRANCH LINE CIRCUIT ..........................72
Diagnosis Procedure ............................................ ...72
M&A BRANCH LINE CIRCUIT ..........................73
Diagnosis Procedure ............................................ ...73
STRG BRANCH LINE CIRCUIT ........................74
Diagnosis Procedure ............................................ ...74
A-BAG BRANCH LINE CIRCUIT ......................75
Diagnosis Procedure ............................................ ...75
BCM BRANCH LINE CIRCUIT ..........................76
Diagnosis Procedure ............................................ ...76
CAN COMMUNICATION CIRCUIT ...................77
Diagnosis Procedure ............................................ ...77
CAN SYSTEM (TYPE 2)
DTC/CIRCUIT DIAGNOSIS ........................
79
MAIN LINE BETWEEN IPDM-E AND DLC
CIRCUIT .......................................................... ...
79
Diagnosis Procedure ............................................ ...79
MAIN LINE BETWEEN DLC AND M&A CIR-
CUIT ................................................................ ...
80
Diagnosis Procedure ............................................ ...80
Revision: November 20132014 Altima NAMRevision: November 20132014 Altima NAM
Page 2952 of 4801

LAN
LAN-3
C
D E
F
G H
I
J
K L
B
A
O P
N
MAIN LINE BETWEEN M&A AND A-BAG
CIRCUIT (WITH AUTO A/C) .......................... ....
81
Diagnosis Procedure ........................................... ....81
MAIN LINE BETWEEN A-BAG AND HVAC
CIRCUIT ........... .............................................. ....
82
Diagnosis Procedure ........................................... ....82
ECM BRANCH LINE CIRCUIT ...........................83
Diagnosis Procedure ........................................... ....83
ABS BRANCH LINE CIRCUIT ...........................84
Diagnosis Procedure ........................................... ....84
EPS BRANCH LINE CIRCUIT ...........................85
Diagnosis Procedure ........................................... ....85
IPDM-E BRANCH LINE CIRCUIT ......................86
Diagnosis Procedure ........................................... ....86
TCM BRANCH LINE CIRCUIT ...........................87
Diagnosis Procedure ........................................... ....87
DLC BRANCH LINE CIRCUIT ...........................88
Diagnosis Procedure ........................................... ....88
M&A BRANCH LINE CIRCUIT ..........................89
Diagnosis Procedure ........................................... ....89
STRG BRANCH LINE CIRCUIT .........................90
Diagnosis Procedure ........................................... ....90
A-BAG BRANCH LINE CIRCUIT .......................91
Diagnosis Procedure ........................................... ....91
HVAC BRANCH LINE CIRCUIT ........................92
Diagnosis Procedure ........................................... ....92
BCM BRANCH LINE CIRCUIT ..........................93
Diagnosis Procedure ........................................... ....93
CAN COMMUNICATION CIRCUIT ....................94
Diagnosis Procedure ........................................... ....94
CAN SYSTEM (TYPE 3)
DTC/CIRCUIT DIAGNOSIS .........................
96
MAIN LINE BETWEEN IPDM-E AND DLC
CIRCUIT ........... .............................................. ....
96
Diagnosis Procedure ........................................... ....96
MAIN LINE BETWEEN DLC AND M&A CIR-
CUIT ................................................................ ....
97
Diagnosis Procedure ........................................... ....97
MAIN LINE BETWEEN M&A AND A-BAG
CIRCUIT (WITH AUTO A/C) .......................... ....
98
Diagnosis Procedure ........................................... ....98
MAIN LINE BETWEEN A-BAG AND HVAC
CIRCUIT ........... .............................................. ....
99
Diagnosis Procedure ........................................... ....99
ECM BRANCH LINE CIRCUIT .......................100
Diagnosis Procedure ........................................... ..100
ABS BRANCH LINE CIRCUIT ........................101
Diagnosis Procedure .............................................101
EPS BRANCH LINE CIRCUIT ........................102
Diagnosis Procedure .............................................102
IPDM-E BRANCH LINE CIRCUIT ...................103
Diagnosis Procedure .............................................103
TCM BRANCH LINE CIRCUIT ........................104
Diagnosis Procedure .............................................104
DLC BRANCH LINE CIRCUIT ........................105
Diagnosis Procedure .............................................105
M&A BRANCH LINE CIRCUIT .......................106
Diagnosis Procedure .............................................106
STRG BRANCH LINE CIRCUIT .....................107
Diagnosis Procedure .............................................107
A-BAG BRANCH LINE CIRCUIT ....................108
Diagnosis Procedure .............................................108
AV BRANCH LINE CIRCUIT ..........................109
Diagnosis Procedure .............................................109
HVAC BRANCH LINE CIRCUIT .....................110
Diagnosis Procedure .............................................110
BCM BRANCH LINE CIRCUIT .......................111
Diagnosis Procedure .............................................111
CAN COMMUNICATION CIRCUIT .................112
Diagnosis Procedure .............................................112
CAN SYSTEM (TYPE 4)
DTC/CIRCUIT DIAGNOSIS .......................
114
MAIN LINE BETWEEN IPDM-E AND DLC
CIRCUIT ...................... ....................................
114
Diagnosis Procedure ........................................... ..114
MAIN LINE BETWEEN DLC AND M&A CIR-
CUIT ................................................................
115
Diagnosis Procedure ........................................... ..115
MAIN LINE BETWEEN M&A AND A-BAG
CIRCUIT (WITH AUTO A/C) ...........................
116
Diagnosis Procedure ........................................... ..116
MAIN LINE BETWEEN A-BAG AND HVAC
CIRCUIT ...................... ....................................
117
Diagnosis Procedure ........................................... ..117
ECM BRANCH LINE CIRCUIT .......................118
Diagnosis Procedure .............................................118
ABS BRANCH LINE CIRCUIT ........................119
Diagnosis Procedure .............................................119
Revision: November 20132014 Altima NAMRevision: November 20132014 Altima NAM