Page 337 of 4801
BODY ALIGNMENTBRM-59
< SERVICE DATA AND SPECIFICATIONS (SDS)
C
D E
F
G H
I
J
L
M A
B
BRM
N
O P
Figures marked with an (*) indicate symmetrically identical dimensions on both the RH and LH side of the vehicle.
Measurement Points
T - t 1473 (57.99)
U - u 1473 (57.99) V - v 1450 (57.09)
W - w 1201 (47.28)
Position Description
Revision: November 20132014 Altima NAM
Page 338 of 4801
BRM-60
< SERVICE DATA AND SPECIFICATIONS (SDS)
BODY ALIGNMENT
Front
Position Description A. Dash panel hole center
B. Roof panel center mark
C - c Body side outer corner
AWKIA2269ZZ
Revision: November 20132014 Altima NAM
Page 339 of 4801
BODY ALIGNMENTBRM-61
< SERVICE DATA AND SPECIFICATIONS (SDS)
C
D E
F
G H
I
J
L
M A
B
BRM
N
O P
D - d Body side positioning mark E -e Body side outer notch for alignmentF - f Body side outer notch for alignment
G - g Body side hole for door hinge H - h Body side outer notch for alignment J - j Body side hole for door hinge
K - k Body side outer notch for alignment
M - m Body side outer notch for alignment N - n Body side outer notch for alignmentP - p Body side outer notch for alignment
Q - q Body side hole for door hinge R - r Body side outer notch for alignment
S - s Body side hole for door hinge T - t Body side outer notch for alignment
Position Description
Front
Position DescriptionU - u Body side outer notch for alignmentV - v Body side outer notch for alignment
W - w Body side outer notch for alignment
ALKIA3038ZZ
Revision: November 20132014 Altima NAM
Page 340 of 4801
BRM-62
< SERVICE DATA AND SPECIFICATIONS (SDS)
BODY ALIGNMENT
Rear Body
INFOID:0000000009464990
BODY CENTER MARKS
A mark has been placed on each part of the body to indi cate the vehicle center. When repairing parts dam-
aged by an accident which might affect the vehicle frame (members, pillars, etc.), more accurate and effective
repair will be possible by using these marks together with body alignment specifications.
Unit: mm (in)
ALKIA3034ZZ
Revision: November 20132014 Altima NAM
Page 341 of 4801
BODY ALIGNMENTBRM-63
< SERVICE DATA AND SPECIFICATIONS (SDS)
C
D E
F
G H
I
J
L
M A
B
BRM
N
O P
Front Position Description A Roof positioning mark for alignment
B Waist rear flange mark
C Rear end panel notch for alignment
D - d Body side outer corner E - e Body side notch for alignment F - f Body side outer corner
G - g Base rear combination lamp corner
H - h Base rear combination lamp corner
AWKIA2320ZZ
Revision: November 20132014 Altima NAM
Page 342 of 4801
CCS-1
CRUISE CONTROL & DRIVER ASSISTANCE
C
D E
F
G H
I
J
K L
M B
CCS
SECTION CCS
N
P
A
CONTENTS
CRUISE CONTROL SYSTEM
PRECAUTION ................
...............................2
PRECAUTIONS .............................................. .....2
Precaution for Supplemental Restraint System
(SRS) "AIR BAG" and "SEAT BELT PRE-TEN-
SIONER" ............................................................. ......
2
SYSTEM DESCRIPTION ..............................3
AUTOMATIC SPEED CONTROL DEVICE
(ASCD) ...............................................................
3
Information ........................................................... .....3
REMOVAL AND INSTALLATION ................4
SWITCH ..............................................................4
Removal and Installation ..................................... .....4
Revision: November 20132014 Altima NAM
Page 343 of 4801

CCS-2
< PRECAUTION >
PRECAUTIONS
PRECAUTION
PRECAUTIONS
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT
PRE-TENSIONER"
INFOID:0000000009951633
The Supplemental Restraint System such as “A IR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severi ty of injury to the driver and front passenger for certain
types of collision. Information necessary to service the system safely is included in the SR and SB section of
this Service Manual.
WARNING:
• To avoid rendering the SRS inopera tive, which could increase the risk of personal injury or death in
the event of a collision which would result in air bag inflation, all maintenance must be performed by
an authorized NISS AN/INFINITI dealer.
• Improper maintenance, including in correct removal and installation of the SRS, can lead to personal
injury caused by unintent ional activation of the system. For re moval of Spiral Cable and Air Bag
Module, see the SR section.
• Do not use electrical test equipmen t on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harn esses can be identified by yellow and/or orange harnesses or har-
ness connectors.
PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS
WARNING:
• When working near the Airbag Diagnosis Sensor Unit or other Airbag System sensors with the Igni-
tion ON or engine running, DO NOT use air or electri c power tools or strike near the sensor(s) with a
hammer. Heavy vibration could activate the sensor( s) and deploy the air bag(s), possibly causing
serious injury.
• When using air or electric power tools or hammers , always switch the Ignition OFF, disconnect the
battery and wait at least three minutes before performing any service.
Revision: November 20132014 Altima NAM
Page 344 of 4801
CCS
AUTOMATIC SPEED CONTROL DEVICE (ASCD)CCS-3
< SYSTEM DESCRIPTION >
C
D E
F
G H
I
J
K L
M B
N P
A
SYSTEM DESCRIPTION
AUTOMATIC SPEED CONTROL DEVICE (ASCD)
InformationINFOID:0000000009460700
The Automatic Speed Control Device (ASC D) system is controlled by the ECM.
For information regarding the ASCD system, refer to EC-63, "AUTOMATIC SPEED CONTROL DEVICE
(ASCD) : System Description" (QR25DE) or EC-574, "AUTOMATIC SPEED CONTROL DEVICE (ASCD) :
System Description" (VQ35DE).
Revision: November 20132014 Altima NAM