Page 2009 of 4133

 AR68.20-P-2150GI
Disassemble/assemble center console
20.4.01
MODEL 
163.113 /154 /174 #A as of 289565, 
163.113 #X as of 754620, 
163.128 /157 /175
P68.20-2513-09
 
Disassemble/assemble
1
Remove center console
AR68.20-P-2000GH
2
Lay center console down on suitable 
subsurface
3
Remove front ashtray (1)
AR68.20-P-2400GI
4
Remove storage compartment (2)
5
Remove rear center console (3)
AR68.20-P-2020GI
6
Remove rear air nozzle (4)
AR83.10-P-4800GH
7
Remove RCP console module (N72/2)
AR68.20-P-2210GH
8.1
Remove rear beverage holder (5)
Model 163.154 #A as of VIN 145273 up to 
VIN 289564, model 163.172 #A as of VIN 
145273, model 163.113 /174 #A up to VIN 
289564, model 163.136 /154 /172 #X as of 
VIN 708319, model 163.113 #X up to VIN 
754619
AR68.20-P-2220GH
Model 163.113 /154 /174 #A as of VIN 
289565, model 163.113 #X as of VIN 754620 
model 163.128 /157 /175
AR68.20-P-2220GI
9
Remove rear ashtray (6)
AR68.20-P-2230GH
10
Remove bolts (7) for center console from top 
and bottom section
 6 bolts.
11
Remove top section (8) and bottom section 
(9) from center console
12
Remove interior wiring harness (10) from 
center console
13
Assemble in reverse order
Copyright DaimlerChrysler AG  09.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
 d by Modification services.
Page 1 
     
        
        Page 2010 of 4133
 AR68.20-P-2400GI
Remove/install ashtray housing in front center console
20.4.01
MODEL 
163.113 /154 /174 #A as of 289565, 
163.113 #X as of 754620, 
163.128 /157 /175
P68.20-2459-04
1
 Center console
2
 Plug
3
 Bolts
4
 Front ashtray
 
Remove/install
1
Remove center console (1)
AR68.20-P-2000GH
2
Lay center console down on suitable 
subsurface
 Do not damage center console
3
Disconnect plug (2)
4
Remove bolts (3)
5
Remove front ashtray (4)
 
Installation:
  Ensure that ashtray is 
seated correctly in center console.
6
Install in the reverse order
Copyright DaimlerChrysler AG  09.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
 d by Modification services.
Page 1 
     
        
        Page 2011 of 4133
 AR68.20-P-2310GI
Remove/install cover on gearshift lever
26.2.01
MODEL 
163.113 /154 /174 #A as of 289565, 
163.113 #X as of 754620, 
163.128 /157 /175
P68.20-2545-01
1
 Armrest cover
2
 Stowage box
3
 Bolts
4
 Cover on shift lever
5
 Plastic screws
P68.20-2456-01
 
Remove/install
1
Remove armrest lid (1)
AR68.20-P-2370GH
2
Remove plastic screws (5)
3
Remove stowage box (2)
 Press the pin in the center of the rivet 
downwards for about 4 mm; then remove the 
rivet from above.
4
Remove selector lever paneling
 Long wedge 
*115589035900
5
Unscrew bolts (3)
6Remove cover (4) from above
 Carefully prize open at front (arrows) and 
at the sides.
 Long wedge 
*115589035900
7
Detach connector from lower control panel 
control module
 3 connector.
8
Install in the reverse order
Assembly wedge
115 589 03 59 00
Copyright DaimlerChrysler AG  09.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
 d by Modification services.
Page 1 
     
        
        Page 2012 of 4133
 AR83.10-P-4800GH
Removing and installing rear air nozzle
30.5.01
MODEL 
163.113 /154 /174 #A as of 289565, 
163.113 #X as of 754620, 
163.128 /157 /175
P68.20-2494-11
1
 Rear center console.
2
 Retaining clips
3
 Air nozzle
 
Remove/install
1
Remove rear center console (1)
AR68.20-P-2020GI
2
Loosen retaining clamps (2) on the sides of 
the air nozzle (3)
3
Remove air nozzle (3) from the rear center 
console
4
Install in the reverse order
Copyright DaimlerChrysler AG  09.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
 d by Modification services.
Page 1 
     
        
        Page 2013 of 4133
 AR68.20-P-2230GH
Remove/install rear ashtray
9.5.01
MODEL 
163.113 /154 /174 #A as of 289565, 
163.113 #X as of 754620, 
163.128 /157 /175
P68.20-2498-11
1
 Rear center console.
2
 Locking pin
3
 Ashtray
 
Remove/install
1
Remove rear center console (1)
AR68.20-P-2020GI
2
Remove locking pin (2) from ashtray hinge
3
Remove ashtray (3)
4
Install in the reverse order
Copyright DaimlerChrysler AG  10.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
 d by Modification services.
Page 1 
     
        
        Page 2014 of 4133
 AR68.20-P-2220GI
Remove/install rear beverage holder
9.5.01
MODEL 
163.113 /154 /174 #A as of 289565, 
163.113 #X as of 754620, 
163.128 /157 /175
P68.20-2497-11
1
 Rear center console.
2
 Air nozzle
3
 Beverage holder
4
 Ball joint
5
 Bolts
6
 Paneling
 
Remove/install
1
Remove rear center console (1)
AR68.20-P-2020GI
2
Separate air nozzle (2) from beverage holder 
(3)
 Loosen ball joint (4) from bottom of 
beverage holder.
3
Unscrew bolts (5) from sides of beverage 
holder
4
Remove beverage holder (3)
 Press onto paneling (6).
5
Install in the reverse order
Copyright DaimlerChrysler AG  09.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
 d by Modification services.
Page 1 
     
        
        Page 2015 of 4133
 AR68.20-P-2220GI
Remove/install rear beverage holder
9.5.01
MODEL 
163.113 /154 /174 #A as of 289565, 
163.113 #X as of 754620, 
163.128 /157 /175
P68.20-2497-11
1
 Rear center console.
2
 Air nozzle
3
 Beverage holder
4
 Ball joint
5
 Bolts
6
 Paneling
 
Remove/install
1
Remove rear center console (1)
AR68.20-P-2020GI
2
Separate air nozzle (2) from beverage holder 
(3)
 Loosen ball joint (4) from bottom of 
beverage holder.
3
Unscrew bolts (5) from sides of beverage 
holder
4
Remove beverage holder (3)
 Press onto paneling (6).
5
Install in the reverse order
Copyright DaimlerChrysler AG  10.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
 d by Modification services.
Page 1 
     
        
        Page 2016 of 4133
 AR68.20-P-2210GH
Remove/install rear center console switch module
25.5.01
MODEL 
163.113 /154 /174 #A as of 289565, 
163.113 #X as of 754620, 
163.128 /157 /175
P68.20-2495-11
1
 Rear center console.
2
 Retaining clamps
3
 Bolts
N72/2
 RCP [HBF] control module
 
Remove/install
1
Remove rear center console (1)
AR68.20-P-2020GI
2
Remove retaining clamps RCP control 
module (N72/2) from rear center console (1)
 Press retaining clamps (2) toward inside.
3
Unscrew bolts (3) on RCP control module 
(N72/2) from cover
4
Install in the reverse order
Copyright DaimlerChrysler AG  09.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
 d by Modification services.
Page 1