Page 2017 of 4133

AR68.20-P-2020GI
Remove/install rear center console
18.5.01
MODEL
163.113 /154 /174 #A as of 289565,
163.113 #X as of 754620,
163.128 /157 /175
P68.20-2493-06
1
Armrest cover
2
Bolts
3
Ashtray paneling
4
Clips
5
Bolts
6
Rear section of center console
Remove/install
1
Remove armrest lid (1)
AR68.20-P-2370GH
2
Remove stowage box on center console
Press center pin approx. 4 mm down,
then remove rivet upward
3
Remove bolts (2) from beverage holder
4
Remove ashtray inner section
5
Remove ashtray paneling (3)
Danger of breaking clips (4).
Loosen clips (4) and pull bottom edge of
cover toward rear and remove upward
6
Remove bolts (5)
7
Unclip rear center console (6) at top (arrows).
Long wedge
*115589035900
8
Remove rear center console (6) from center
console
9
Disconnect connector from rear control panel
control module and ashtray
Disconnect connector for rear ashtray
from ashtray housing
10
Install in the reverse order
Long wedge
115 589 03 59 00
Copyright DaimlerChrysler AG 09.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1
Page 2018 of 4133
AR72.29-P-0001GI
Remove/install switch group on center console
23.4.01
MODEL
163.113 /154 /174 #A as of 289565,
163.113 #X as of 754620,
163.128 /157 /175
1
Cover
2
Bolts
N72
Lower control field control module
P72.29-2108-03
Remove/install
1
Remove cover (1) on gearshift lever
AR68.20-P-2310GI
2
Remove screws (2) at the lower side of the
lower control panel control module (N72)
3
Detach lower control panel control module
(N72) from the cover
The lower control panel control module
can only be replaced as a unit.
4
Install in the reverse order
Copyright DaimlerChrysler AG 10.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1
Page 2019 of 4133

AR68.20-P-2150GH
Disassembling and assembling center console
4.2.97
MODEL
163.113 /136 /154 /172 /174 up to 31.8.01
P68.20-0440-09
1
Center console.
2
Cover
3
Ashtray housing
4
Beverage holder
S21/15s1
Left rear power window switch
S21/15s2
Right rear power window switch
5
Cover
6
Internal component
7
Center console upper section
8
Center console bottom section
Operation no. of operation texts or standard texts and flat rates
Range
Op. no.
Operation text
P
685115
REPLACING CENTER CONSOLE
Disassemble/assemble
1
Remove center console
AR68.20-P-2000GH
2
Lay center console (1) down on suitable
subsurface with opening pointing downward
3
Remove rear power window switches
(S21/15s1) and (S21/15s2)
Remove switch to inside and cover (2) to
outside
4
Remove rear ashtray housing (3)
5
Unclip cup holder (4) from cover (5)
6
Remove cover (5) for cup holder
7
Remove inner section (6)
Installation:
Install inner section at top.
8
Separate center console on top section (7)
and bottom section (8)
6 screws
9
Assemble in reverse sequence
Copyright DaimlerChrysler AG 10.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1
Page 2020 of 4133
AR68.20-P-2400GH
Removing and installing ashtray housing from front center console
11.2.97
MODEL
163.113 /136 /154 /172 /174 up to 31.8.01
P68.20-0455-01
1
Cover on gearshift lever
2
Ashtray housing
P68.20-0454-01
Remove/install
1
Remove cover on gearshift lever (1)
AR68.20-P-2310GH
2
Remove ashtray housing (2) toward rear
Installation:
Slide ashtray housing into
mount and catch.
3
Install in the reverse order
Copyright DaimlerChrysler AG 10.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1
Page 2021 of 4133
AR68.20-P-2020GH
Removing and installing rear section of center console
18.5.01
MODEL
163.113 /136 /154 /172 /174 as of 1.9.99 up to 31.8.01
P68.20-2492-06
1
Rear cupholder
2
Screw
3
Center console rear section
4
Tab
Remove, install
1
Open rear cupholder (1), release from center
console and fold down
2
Remove screws (2)
3
Unclip rear section (3) at top (arrows)
*115589035900
4
Release tabs (4) at bottom
Danger of breaking.
5
Pull rear section (3) away from center console
6
Unplug connectors for rear window switches
7
Install in reverse order
Long wedge
115 589 03 59 00
Copyright DaimlerChrysler AG 10.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1
Page 2022 of 4133
AR72.29-P-0001GH
Removing and installing center console switch group
14.2.97
MODEL
163.113 /136 /154 /172 /174 up to 31.8.01
P72.29-0273-05
S21
Center console switch group
Operation no. of operation texts or standard texts and flat rates
Range
Op. no.
Operation text
P
725733
REPLACING SWITCH FOR POWER WINDOW IN CENTER CONSOLE; LOCATION: ............. (AFTER CHECKING)
P
725734
REPLACING SWITCH FOR POWER WINDOW IN CENTER CONSOLE FOR REAR OPERATION; LOCATION .............
(AFTER CHECKING)
P
725760
REPLACING SWITCH FOR POWER WINDOWS (BOTH) IN CENTER CONSOLE FOR LEFT AND RIGHT REAR
DOOR (AFTER CHECKING)
Removal, installation
1
Remove ashtray at front of center console
AR68.20-P-2400GH
2
Unclip center console switch group (S21)
Center console switch group can only be
replaced completely.
3
Install in the reverse order
Copyright DaimlerChrysler AG 10.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1
Page 2023 of 4133

AR68.20-P-2310GH
Removing and installing cover at gearshift lever
4.2.97
MODEL
163.113 /136 /154 /172 /174 up to 31.8.01
P68.20-0434-06
1
Plastic frame
2
Covering in front stowage compartment
3
Center console insert
4
Cover
5
Connectors
S21
Center console switch group
Operation no. of operation texts or standard texts and flat rates
Range
Op. no.
Operation text
P
683450
REMOVING AND INSTALLING COVER FOR SHIFT LEVER
P
683455
REPLACING COVER FOR GEARSHIFT LEVER
Remove/install
1
Remove plastic frame (1) upward
*115589035900
2
Remove covering in stowage
compartment (2)
Fastened with pin.
3
Remove center console insert (3)
Remove screws (2 each) from insert floor
4
Press cover (4) out of catch in center console
at rear and sides with long wedge
*115589035900
5
Disconnect connectors (5) from center
console switch group (S21)
6
Install in the reverse order
Long wedge
115 589 03 59 00
Copyright DaimlerChrysler AG 09.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1
Page 2024 of 4133
AR68.20-P-2370GH
Remove/install armrest lid on center console
15.4.97
MODEL
163.113 /128 /136 /154 /157 /172 /174 /175
P68.20-0461-06
Illustrated on model 163 up to 31.08.01
1
Stowage compartment
2
Screws
3
Stowage box
4
Screws
5
Armrest cover
P68.20-2544-04
Illustrated on model 163 as of 01.09.01
4
Bolts
5
Armrest cover
6
Access openings
Removing, installing
1.1
Remove storage compartment (1)
Up to 31.08.01: Unclip stowage
compartment (1) from stowage box (3)
2.1
Unscrew screws (2) and remove stowage box
(3)
up to 31.08.01
3
Unscrew screws (4).
4
Remove armrest lid (5)
As of 01.09.01: Insert long wedge into
access openings (6) and loosen retaining lugs.
Long wedge
*115589035900
5
Install in the reverse order
Assembly wedge
115 589 03 59 00
Copyright DaimlerChrysler AG 09.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1