Page 1985 of 4133
11.1
Remove rubber seal for E-call emergency call
system antenna from body at right
Only with emergency call system E-Call,
code 349.
12
Install in the reverse order
Bumper
Number
Designation
Model 163
BA88.20-P-1006-01B
Nuts for rear bumper on cross member
Nm
8
BA88.20-P-1007-01B
Screws for rear bumper on cross member,
rear
Nm
8
Designation
Model 163
up to
31.8.01
BA88.30-P-1004-01A
Nut for retaining strap on mud guard on vehicle
underbody
Nm
6
Long wedge
115 589 03 59 00
Copyright DaimlerChrysler AG 17.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 2
Page 1986 of 4133
AR82.10-P-5103GH
Remove/install fog lamp
5.5.00
MODEL
163.113 /128 /136 /154 /157 /172 /175 with CODE (U49) Styling package
MODEL
163.174
P82.10-2830-06
1
Cover
2
Bolt
3
Fog lamp
Remove/Install
1
Remove cover (1)
2
Unscrew bolt (2)
3
Remove fog lamp (3) from bumper
4
Disconnect connector
5
Install in the reverse order
Copyright DaimlerChrysler AG 17.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1
Page 1987 of 4133
AR82.10-P-1825GH
Remove/install fog lamp bulb
23.4.01
MODEL
163.113 /128 /136 /154 /157 /172 /175 with CODE (U49) Styling package
MODEL
163.174
P82.10-2833-06
1
Cover
2
Bulb housing
3
Bulb
4
Connector
5
Locking mechanism
6
Fog lamp insert
Remove/install
1
Remove cover (1) from bumper
Do not break retaining lugs.
2
Remove bulb housing (2)
To unlock, rotate counterclockwise.
Installation:
Ensure that the locking
device has locked securely.
3
Remove fog lamp insert (6) from housing
Installation wedge
*115589035900
4
Disconnect connector (4)
5
Remove bulb on the back of the fog lamp
insert (6)
Do not hold the bulb with bare fingers, as
fingerprints bake and leave behind
opaqueness on the bulb. Use a soft, lint-free
cloth.
Lock securely.
6
Install in the reverse order
Longitudinal wedge
115 589 03 59 00
Copyright DaimlerChrysler AG 17.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1
Page 1988 of 4133
AR54.65-P-0001GH
Remove/install Parktronic system (PTS) sensors in front bumper
19.4.01
MODEL
163.113 /128 /154 /157 /174 /175 with CODE (220a) Parktronic System (PTS)
P54.65-2411-06
1
Plug connection
2
Parktronic system sensor
3
Retaining clamps
Remove/install
1
Remove front bumper
with styling package, code U49.
AR88.20-P-2000GI
As of 01.09.01.
AR88.20-P-2000GJ
2
Put down bumper safely in a suitable place
Do not damage paintwork.
3
Disconnect connector (1) from Parktronic
system sensor(2)
4
Remove Parktronic system sensor (2) from
the bumper
Bo not brake off the retaining clamps (3).
Release tool
*168589023100
5
Install in the reverse order
Release tool
168 589 02 31 00
Copyright DaimlerChrysler AG 20.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1
Page 1989 of 4133

AR88.20-P-2000GI
Remove/install front bumper
5.4.99
MODEL
163.113 /128 /136 /154 /157 /172 /175 with CODE (U49) Styling package
MODEL
163.174
P88.20-2093-09
Remove, Install
1
Unscrew nuts (1)
On left and right inside of bumper.
*BA88.20-P-1001-01B
2
Remove bumper grill
Do not damage bumper, bumper grate
and grate mounts
Loosen retainers and pull to outside
Pulling hook
*140589023300
3
Remove outside temperature sensor from
bumper
4
Unscrew screw (2)
*BA88.20-P-1003-01B
5
Remove bumper toward front
Do not damage paint.
6
Disconnect electrical connector from fog
lamp/Parktronic
7
Disconnect splash water hose
Plug splash water hose.
Installation:
Fill water reservoir.
8
Install in the reverse order
Bumper
Number
Designation
Model
Series 163
BA88.20-P-1001-01B
Nut, front bumper on outer mount
Nm
8
BA88.20-P-1003-01B
Nut, front bumper on frame
Nm
8
Copyright DaimlerChrysler AG 17.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1
Page 1990 of 4133
Hooked extraction tool
140 589 02 33 00
Copyright DaimlerChrysler AG 17.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 2
Page 1991 of 4133
AR54.65-P-0002GH
Remove/install Parktronic system (PTS) sensors in rear bumper
19.4.01
MODEL
163.113 /128 /154 /157 /174 /175 with CODE (220a) Parktronic System (PTS)
P54.65-2412-06
1
Plug connection
2
Parktronic system sensor
3
Retaining clamps
Remove/install
1
Remove rear bumper
with styling package, code U49.
AR88.20-P-2200GJ
As of 01.09.01.
AR88.20-P-2200GK
2
Put down bumper safely in a suitable place
Do not damage paintwork.
3
Disconnect connector (1) from Parktronic
system sensor(2)
4
Remove Parktronic system sensor (2) from
the bumper
Bo not brake off the retaining clamps (3).
Release tool
*168589023100
5
Install in the reverse order
Release tool
168 589 02 31 00
Copyright DaimlerChrysler AG 20.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1
Page 1992 of 4133

AR88.20-P-2200GJ
Remove/install rear bumper
6.4.99
MODEL
163.113 /128 /136 /154 /157 /172 /175 with CODE (U49) Styling package
MODEL
163.174
P88.20-2090-09
Remove/install
1.1
Separate antenna of emergency call system
E-Call connector
Only with E-call emergency call system,
code 349. The connector is located behind
the side flap of the right C-pillar paneling at
the jack socket point.
2
Unscrew screws (A) on energy absorber
retaining straps at bottom of cross member
2 each.
*BA88.20-P-1005-01B
3
Pull cover strip off of screws (B) at top of
bumper
Velcro strips
4
Unscrew screws (B) at top of bumper
*BA88.20-P-1005-01B
5
Pull bumper to the rear and remove
Do not damage paintwork/wiring harness.
Installation:
Align bumper at tailgate and
at taillamps.
6.1
Remove rubber seal of antenna of emergency
call system E-Call on right at body
Only with emergency call system E-Call,
Code 349.
7.1
Disconnect connector from Parktronic system
Only with Parktronic system (PTS), code
220a. Remove left rubber seal at body.
8
Install in the reverse order
Bumper
Number
Designation
Model 163
BA88.20-P-1005-01B
Screws, rear bumper to frame
Nm
8
Copyright DaimlerChrysler AG 20.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1