Page 57 of 3641
AV-52
< SYMPTOM DIAGNOSIS >[BASE AUDIO]
NORMAL OPERATING CONDITION
The other party’s voice cannot be heard by hands-free phone.When the radio wave condition is not ideal or ambient sound is too
loud, it may be difficult to hear the other person’s voice during a
call.
Poor sound quality. Do not place the cellular phone in an area surrounded by metal or
far away from the in-vehicle phone module to prevent tone quality
degradation and wireless connection disruption.
Symptom
Cause and Counter measure
Revision: August 2015 2016 Versa Note
cardiagn.com
Page 58 of 3641
AV
AUDIO UNITAV-53
< REMOVAL AND INSTALLATION > [BASE AUDIO]
C
D
E
F
G H
I
J
K L
M B A
O P
REMOVAL AND INSTALLATION
AUDIO UNIT
Exploded ViewINFOID:0000000012432889
Removal and InstallationINFOID:0000000012432890
REMOVAL
1. Remove the negative battery cable. Refer to PG-70, "Removal and Installation (Battery)".
2. Remove cluster lid C. Refer to IP-22, "
Removal and Installation".
3. Remove the audio unit screws, then pull out the audio unit.
4. Disconnect the harness connectors from the audio unit and remove.
INSTALLATION
Installation is in the reverse order of removal.
1. Audio unit bracket (LH) 2. Audio unit 3. Audio unit bracket (RH)
AWNIA3121ZZ
Revision: August 2015 2016 Versa Note
cardiagn.com
Page 59 of 3641
AV-54
< REMOVAL AND INSTALLATION >[BASE AUDIO]
FRONT DOOR SPEAKER
FRONT DOOR SPEAKER
Removal and InstallationINFOID:0000000012432891
REMOVAL
1. Remove the front door finisher. Refer to
INT-15, "Removal and Installation".
2. Remove the front door speaker screws (A).
3. Disconnect the harness connector from front door speaker (1) and remove.
INSTALLATION
Installation is in the reverse order of removal.
AWNIA3062ZZ
Revision: August 2015 2016 Versa Note
cardiagn.com
Page 60 of 3641
AV
REAR DOOR SPEAKERAV-55
< REMOVAL AND INSTALLATION > [BASE AUDIO]
C
D
E
F
G H
I
J
K L
M B A
O P
REAR DOOR SPEAKER
Removal and InstallationINFOID:0000000012432892
REMOVAL
1. Remove the rear door finisher. Refer to INT-18, "Removal and Installation".
2. Remove the rear door speaker screws (A).
3. Disconnect the harness connector from the rear door speaker (1) and remove.
INSTALLATION
Installation is in the reverse order of removal.
AWNIA3089ZZ
Revision: August 2015 2016 Versa Note
cardiagn.com
Page 61 of 3641
AV-56
< REMOVAL AND INSTALLATION >[BASE AUDIO]
BLUETOOTH® CONTROL UNIT
BLUETOOTH® CONTROL UNIT
Removal and InstallationINFOID:0000000012432893
REMOVAL
1. Remove the luggage side lower finisher (RH). Refer to
INT-34, "LUGGAGE SIDE LOWER FINISHER :
Removal and Installation".
2. Disconnect the harness connectors fr om the Bluetooth® control unit.
3. Remove the Bluetooth® ant enna screws (A) and the Bluetooth®
antenna (1).
4. Remove the Bluetooth® control unit bracket screws (A) and the Bluetooth® control unit (1).
5. Remove the Bluetooth® control unit screws (A) and separate the Bluetooth® control unit (1) from the bracket (2).
INSTALLATION
Installation is in the reverse order of removal.
AWNIA3095ZZ
AWNIA3122ZZ
AWNIA3097ZZ
Revision: August 2015 2016 Versa Note
cardiagn.com
Page 62 of 3641
AV
BLUETOOTH® ANTENNAAV-57
< REMOVAL AND INSTALLATION > [BASE AUDIO]
C
D
E
F
G H
I
J
K L
M B A
O P
BLUETOOTH® ANTENNA
Removal and Installation INFOID:0000000012432894
REMOVAL
1. Remove the luggage side lower finisher (RH). Refer to INT-34, "LUGGAGE SIDE LOWER FINISHER :
Removal and Installation".
2. Disconnect the Bluetooth® antenna harness connec tor from the Bluetooth® control unit.
3. Remove the Bluetooth® antenna screws (A) and the Bluetooth® antenna (1).
INSTALLATION
Installation is in the reverse order of removal.
AWNIA3095ZZ
Revision: August 2015 2016 Versa Note
cardiagn.com
Page 63 of 3641
AV-58
< REMOVAL AND INSTALLATION >[BASE AUDIO]
STEERING SWITCH
STEERING SWITCH
Removal and InstallationINFOID:0000000012432895
REMOVAL
1. Remove the steering wheel. Refer to ST-8, "Removal and Installation".
2. Remove the steering wheel rear finisher (1) by releasing pawls (A).
3. Remove the steering wheel audio control switch screws (A) from the back of the steering wheel.
4. Remove the steering wheel audio control switches from the steering wheel.
INSTALLATION
Installation is in the reverse order of removal.
AWNIA3063ZZ
AWNIA3064ZZ
Revision: August 2015 2016 Versa Note
cardiagn.com
Page 64 of 3641
AV
MICROPHONEAV-59
< REMOVAL AND INSTALLATION > [BASE AUDIO]
C
D
E
F
G H
I
J
K L
M B A
O P
MICROPHONE
Removal and InstallationINFOID:0000000012432896
REMOVAL
1. Remove the microphone finisher from the headlining by releas- ing pawls (A) using a suitable tool.
2. Disconnect the harness connector from microphone and remove.
3. Separate the microphone from the finisher by releasing pawls (A) using a suitable tool.
INSTALLATION
Installation is in the reverse order of removal.
NOTE:
• Make sure to align the rib on the finisher with the slot in the microphone.
• Make sure to install the microphone with the arrows pointing toward the RH side of the vehicle.
AWNIA3153ZZ
AWNIA3154ZZ
Revision: August 2015 2016 Versa Note
cardiagn.com