Page 1993 of 3641
MANUAL AIR CONDITIONING SYSTEMHAC-25
< WIRING DIAGRAM > [MANUAL AIR CONDITIONING]
C
D
E
F
G H
J
K L
M A
B
HAC
N
O P
ABIIA1696GB
Revision: August 2015 2016 Versa Note
cardiagn.com
Page 1994 of 3641
HAC-26
< WIRING DIAGRAM >[MANUAL AIR CONDITIONING]
MANUAL AIR CONDITIONING SYSTEM
ABIIA1697GB
Revision: August 2015
2016 Versa Note
cardiagn.com
Page 1995 of 3641
MANUAL AIR CONDITIONING SYSTEMHAC-27
< WIRING DIAGRAM > [MANUAL AIR CONDITIONING]
C
D
E
F
G H
J
K L
M A
B
HAC
N
O P
ABIIA1698GB
Revision: August 2015 2016 Versa Note
cardiagn.com
Page 1996 of 3641
HAC-28
< BASIC INSPECTION >[MANUAL AIR CONDITIONING]
DIAGNOSIS AND REPAIR WORKFLOW
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORKFLOW
WorkflowINFOID:0000000012430727
OVERALL SEQUENCE
DETAILED FLOW
1.INTERVIEW CUSTOMER
Interview the customer to obtain as much inform ation as possible about the conditions and environment under
which the malfunction occurred.
ALIIA0440GB
Revision: August 2015 2016 Versa Note
cardiagn.com
Page 1997 of 3641
![NISSAN NOTE 2016 Service Repair Manual DIAGNOSIS AND REPAIR WORKFLOWHAC-29
< BASIC INSPECTION > [MANUAL AIR CONDITIONING]
C
D
E
F
G H
J
K L
M A
B
HAC
N
O P
>> GO TO 2.
2.SYMPTOM CHECK
Verify symptoms.
>> GO TO 3.
3.CHECK FOR DTCS
With CONS NISSAN NOTE 2016 Service Repair Manual DIAGNOSIS AND REPAIR WORKFLOWHAC-29
< BASIC INSPECTION > [MANUAL AIR CONDITIONING]
C
D
E
F
G H
J
K L
M A
B
HAC
N
O P
>> GO TO 2.
2.SYMPTOM CHECK
Verify symptoms.
>> GO TO 3.
3.CHECK FOR DTCS
With CONS](/manual-img/5/57363/w960_57363-1996.png)
DIAGNOSIS AND REPAIR WORKFLOWHAC-29
< BASIC INSPECTION > [MANUAL AIR CONDITIONING]
C
D
E
F
G H
J
K L
M A
B
HAC
N
O P
>> GO TO 2.
2.SYMPTOM CHECK
Verify symptoms.
>> GO TO 3.
3.CHECK FOR DTCS
With CONSULT
1. Turn ignition switch ON.
2. Select “Self Diagnostic Result” of “BCM”.
3. Check DTC.
Is any DTC detected?
YES >> GO TO 4.
NO >> GO TO 5.
4.PERFORM DTC DIAGNOSTIC PROCEDURE
Perform the diagnostic procedure fo r the detected DTC. Refer to BCS-49, "
DTCInspectionPriorityChart"
(with Intelligent Key system) or BCS-115, "DTCInspectionPriorityChart" (without Intelligent Key system).
>> GO TO 7.
5.OPERATION CHECK
Perform the operation check. Refer to HAC-30, "
Work Procedure".
>> GO TO 6.
6.SYMPTOM DIAGNOSIS
Check the symptom diagnosis table. Refer to HAC-47, "
Symptom Table".
>> GO TO 8.
7.VERIFY REPAIR.
With CONSULT
1. Turn ignition switch ON.
2. Select “Self Diagnostic Result” of “BCM”.
3. Check DTC.
Is any DTC detected?
YES >> GO TO 4.
NO >> GO TO 8.
8.PERFORM FINAL OPERATION CHECK
Perform the operation check. Refer to HAC-30, "
Work Procedure".
Does it operate normally?
YES >> Inspection End.
NO >> GO TO 2.
Revision: August 2015 2016 Versa Note
cardiagn.com
Page 1998 of 3641
![NISSAN NOTE 2016 Service Repair Manual HAC-30
< BASIC INSPECTION >[MANUAL AIR CONDITIONING]
OPERATION INSPECTION
OPERATION INSPECTION
Work ProcedureINFOID:0000000012430728
The purpose of the operation inspection is to c
heck that the indiv NISSAN NOTE 2016 Service Repair Manual HAC-30
< BASIC INSPECTION >[MANUAL AIR CONDITIONING]
OPERATION INSPECTION
OPERATION INSPECTION
Work ProcedureINFOID:0000000012430728
The purpose of the operation inspection is to c
heck that the indiv](/manual-img/5/57363/w960_57363-1997.png)
HAC-30
< BASIC INSPECTION >[MANUAL AIR CONDITIONING]
OPERATION INSPECTION
OPERATION INSPECTION
Work ProcedureINFOID:0000000012430728
The purpose of the operation inspection is to c
heck that the individual system operates normally.
1.CHECK FRONT BLOWER MOTOR
1. Operate fan control dial.
2. Check that fan speed changes. C heck operation for all fan speeds.
Is the inspection result normal?
YES >> GO TO 2.
NO >> GO TO 8.
2.CHECK DISCHARGE AIR
1. Operate fan control dial to set the fan speed to maximum speed.
2. Operate MODE dial to each position.
3. Check that air outlets change according to each indicated air outlet by placing a hand in front of the air outlets. Refer to VTL-4, "
System Description".
Is the inspection result normal?
YES >> GO TO 3.
NO >> GO TO 8.
3.CHECK INTAKE AIR
1. Operate intake lever to each position.
2. Listen to intake sound and confirm air inlets change.
Is the inspection result normal?
YES >> GO TO 4.
NO >> GO TO 8.
4.CHECK COMPRESSOR
1. Turn fan control dial ON.
2. Press A/C switch. The A/C switch indicator is turns ON.
3. Check visually and by sound that the compressor operates.
4. Press A/C switch again. The A/C switch indicator is turns OFF.
5. Check that compressor stops.
Is the inspection result normal?
YES >> GO TO 5.
NO >> GO TO 8.
5.CHECK DISCHARGE AIR TEMPERATURE
1. Operate temperature control dial.
2. Check that discharge air temperature changes.
Is the inspection result normal?
YES >> GO TO 6.
NO >> GO TO 8.
6.CHECK TEMPERATURE DECREASE
1. Operate compressor.
2. Turn temperature control dial to full cold position.
3. Check that cool air blows from the air outlets.
Is the inspection result normal?
YES >> GO TO 7.
NO >> GO TO 8.
7.CHECK TEMPERATURE INCREASE Check condition : Engine running
at normal operating temperature.
Revision: August 2015 2016 Versa Note
cardiagn.com
Page 1999 of 3641
OPERATION INSPECTIONHAC-31
< BASIC INSPECTION > [MANUAL AIR CONDITIONING]
C
D
E
F
G H
J
K L
M A
B
HAC
N
O P
1. Turn temperature control dial to full hot position.
2. Check that warm air blows from air outlets.
Is the inspection result normal?
YES >> Inspection End.
NO >> GO TO 8.
8.CHECK SELF-DIAGNOSIS WITH CONSULT
1. Perform self-diagnosis with CONSULT.
2. Check that any DTC is detected.
Is any DTC detected?
YES >> Perform trouble diagnosis for the detected DTC.
NO >> Refer to HAC-47, "
Symptom Table" and perform the appropriate diagnosis.
Revision: August 2015 2016 Versa Note
cardiagn.com
Page 2000 of 3641
![NISSAN NOTE 2016 Service Repair Manual HAC-32
< DTC/CIRCUIT DIAGNOSIS >[MANUAL AIR CONDITIONING]
A/C ON SIGNAL
DTC/CIRCUIT DIAGNOSIS
A/C ON SIGNAL
Component Function CheckINFOID:0000000012430729
1.CHECK A/C ON SIGNAL
With CONSULT
1. Turn i NISSAN NOTE 2016 Service Repair Manual HAC-32
< DTC/CIRCUIT DIAGNOSIS >[MANUAL AIR CONDITIONING]
A/C ON SIGNAL
DTC/CIRCUIT DIAGNOSIS
A/C ON SIGNAL
Component Function CheckINFOID:0000000012430729
1.CHECK A/C ON SIGNAL
With CONSULT
1. Turn i](/manual-img/5/57363/w960_57363-1999.png)
HAC-32
< DTC/CIRCUIT DIAGNOSIS >[MANUAL AIR CONDITIONING]
A/C ON SIGNAL
DTC/CIRCUIT DIAGNOSIS
A/C ON SIGNAL
Component Function CheckINFOID:0000000012430729
1.CHECK A/C ON SIGNAL
With CONSULT
1. Turn ignition switch ON.
2. Operate front blower motor.
3. Select “AIR CONDITIONER” of “BCM”.
4. Select “AIR COND SW” in “Data Monitor”, and check status under the following condition.
Is the inspection result normal?
YES >> Inspection End.
NO >> Refer to HAC-32, "
Diagnosis Procedure".
Diagnosis ProcedureINFOID:0000000012545183
Regarding Wiring Diagram information, refer to HAC-22, "Wiring Diagram".
1.CHECK FUSE
1. Turn ignition switch OFF.
2. Check 10A fuse (No. 21, located in fuse block (J/B)]. NOTE:
Refer to PG-58, "
Terminal Arrangement".
Is the inspection result normal?
YES >> GO TO 2.
NO >> Replace the blown fuse after repairing the affected circuit.
2.CHECK THERMO CONTROL AMP. POWER SUPPLY
1. Turn ignition switch OFF.
2. Disconnect thermo control amp. connector.
3. Turn ignition switch ON.
4. Check voltage between thermo control amp. harness connector and ground.
Is the inspection result normal?
YES >> GO TO 3.
NO >> Repair harness or connector between thermo control amp. and fuse.
3.CHECK THERMO CONTROL AM P. GROUND CIRCUIT FOR OPEN
1. Turn ignition switch OFF.
2. Check continuity between thermo c ontrol amp. harness connector and ground.
Monitor item Condition Status
AIR COND SW A/C switch ON
On
OFF Off
+
−Voltage (V)
(Approx.)
Thermo control amp.
Connector Terminal
M42 3GroundBattery voltage
Revision: August 2015 2016 Versa Note
cardiagn.com