Page 249 of 3641
AV-244
< REMOVAL AND INSTALLATION >[NAVIGATION]
REAR DOOR SPEAKER
REAR DOOR SPEAKER
Removal and InstallationINFOID:0000000012433096
REMOVAL
1. Remove the rear door finisher. Refer to
INT-18, "Removal and Installation".
2. Remove the rear door speaker screws (A).
3. Disconnect the harness connector from the rear door speaker (1) and remove.
INSTALLATION
Installation is in the reverse order of removal.
AWNIA3089ZZ
Revision: August 2015 2016 Versa Note
cardiagn.com
Page 250 of 3641
AV
USB INTERFACEAV-245
< REMOVAL AND INSTALLATION > [NAVIGATION]
C
D
E
F
G H
I
J
K L
M B A
O P
USB INTERFACE
Removal and InstallationINFOID:0000000012433097
REMOVAL
1. Remove the center console assembly. Refer to IP-18, "Removal and Installation".
2. Release the pawls (A) from the back of the center console assembly (2) using a suitable tool and remove the USB interface
(1).
INSTALLATION
Installation is in the reverse order of removal.
AWNIA3069ZZ
Revision: August 2015 2016 Versa Note
cardiagn.com
Page 251 of 3641
AV-246
< REMOVAL AND INSTALLATION >[NAVIGATION]
AUXILIARY INPUT JACK
AUXILIARY INPUT JACK
Removal and InstallationINFOID:0000000012433098
REMOVAL
1. Remove the center console assembly. Refer to
IP-18, "Removal and Installation".
2. Release the pawls (A) from the back of the center console assembly (2) using a suitable tool and remove the auxiliary input
jack (1).
INSTALLATION
Installation is in the reverse order of removal.
AWNIA3069ZZ
Revision: August 2015 2016 Versa Note
cardiagn.com
Page 252 of 3641
AV
STEERING SWITCHAV-247
< REMOVAL AND INSTALLATION > [NAVIGATION]
C
D
E
F
G H
I
J
K L
M B A
O P
STEERING SWITCH
Removal and InstallationINFOID:0000000012433099
REMOVAL
1. Remove the steering wheel. Refer to ST-8, "Removal and Installation".
2. Remove the steering wheel rear finisher (1) by releasing pawls (A).
3. Remove the steering wheel audio control switch screws (A) from the back of the steering wheel.
4. Remove the steering wheel audio control switches from the steering wheel.
INSTALLATION
Installation is in the reverse order of removal.
AWNIA3063ZZ
AWNIA3064ZZ
Revision: August 2015 2016 Versa Note
cardiagn.com
Page 253 of 3641
AV-248
< REMOVAL AND INSTALLATION >[NAVIGATION]
MICROPHONE
MICROPHONE
Removal and InstallationINFOID:0000000012433100
REMOVAL
1. Remove the microphone finisher from the headlining by releas-
ing pawls (A) using a suitable tool.
2. Disconnect the harness connector from microphone and remove.
3. Separate the microphone from the finisher by releasing pawls (A) using a suitable tool.
INSTALLATION
Installation is in the reverse order of removal.
NOTE:
• Make sure to align the rib on the finisher with the slot in the microphone.
• Make sure to install the microphone with the arro ws pointing toward the RH side of the vehicle.
AWNIA3153ZZ
AWNIA3154ZZ
Revision: August 2015 2016 Versa Note
cardiagn.com
Page 254 of 3641
AV
AROUND VIEW MONITOR CONTROL UNITAV-249
< REMOVAL AND INSTALLATION > [NAVIGATION]
C
D
E
F
G H
I
J
K L
M B A
O P
AROUND VIEW MONITOR CONTROL UNIT
Removal and InstallationINFOID:0000000012433101
REMOVAL
1. Remove the front passenger seat. Refer to SE-22, "PASSENGER SIDE : Removal and Installation".
2. Remove the floor trim. Refer to INT-27, "
Removal and Installation".
3. Disconnect the harness connector from the around view monitor control unit.
4. Remove the screws (A) from the around view monitor control unit bracket and remove.
INSTALLATION
Installation is in the reverse order of removal.
NOTE:
Perform camera image calibration. Refer to AV- 1 7 9 , "
CALIBRATING CAMERA IMAGE (AROUND VIEW
MONITOR) : Work Procedure".
AWNIA3074ZZ
Revision: August 2015 2016 Versa Note
cardiagn.com
Page 255 of 3641
AV-250
< REMOVAL AND INSTALLATION >[NAVIGATION]
FRONT CAMERA
FRONT CAMERA
Removal and InstallationINFOID:0000000012433102
REMOVAL
1. Remove the front grille. Refer to
EXT-32, "Removal and Installation".
2. Remove the front camera screws (A) and remove.
INSTALLATION
Installation is in the reverse order of removal.
NOTE:
Perform camera image calibration. Refer to AV-179, "
CALIBRATING CAMERA IMAGE (AROUND VIEW
MONITOR) : Work Procedure".
AWNIA3075ZZ
Revision: August 2015 2016 Versa Note
cardiagn.com
Page 256 of 3641
AV
REAR VIEW CAMERAAV-251
< REMOVAL AND INSTALLATION > [NAVIGATION]
C
D
E
F
G H
I
J
K L
M B A
O P
REAR VIEW CAMERA
Removal and InstallationINFOID:0000000012433103
REMOVAL
1. Remove the back door outer finisher. Refer to EXT-48, "Removal and Installation".
2. Disconnect the harness connector from rear view camera.
3. Remove the nuts (A) from the rear view camera and remove.
INSTALLATION
Installation is in the reverse order of removal.
NOTE:
Perform camera image calibration. Refer to AV- 1 7 9 , "
CALIBRATING CAMERA IMAGE (AROUND VIEW
MONITOR) : Work Procedure".
AWNIA3070ZZ
Revision: August 2015 2016 Versa Note
cardiagn.com