Page 3457 of 5121
![NISSAN TEANA 2008 Service Manual PCS-66
< COMPONENT DIAGNOSIS >[POWER DISTRIBUTION SYSTEM]
PUSH-BUTTON IGNITION SWITCH POSITION INDICATOR
PUSH-BUTTON IGNITION SWITCH POSITION INDICATOR
DescriptionINFOID:0000000003805763
The switch th NISSAN TEANA 2008 Service Manual PCS-66
< COMPONENT DIAGNOSIS >[POWER DISTRIBUTION SYSTEM]
PUSH-BUTTON IGNITION SWITCH POSITION INDICATOR
PUSH-BUTTON IGNITION SWITCH POSITION INDICATOR
DescriptionINFOID:0000000003805763
The switch th](/manual-img/5/57391/w960_57391-3456.png)
PCS-66
< COMPONENT DIAGNOSIS >[POWER DISTRIBUTION SYSTEM]
PUSH-BUTTON IGNITION SWITCH POSITION INDICATOR
PUSH-BUTTON IGNITION SWITCH POSITION INDICATOR
DescriptionINFOID:0000000003805763
The switch that changes the power supply position.
BCM maintains the power supply position status.
BCM changes the power supply position with the operation of the push-button ignition switch.
Component Function CheckINFOID:0000000003805764
1.CHECK FUNCTION
Check push-button ignition switch (“LOCK INDICATOR”, “ACC INDICATOR” and “IGNITION ON IND”) in
Active Test Mode with CONSULT-III.
Is the inspection result normal?
YES >> INSPECTION END
NO >> Refer to PCS-66, "
Diagnosis Procedure".
Diagnosis ProcedureINFOID:0000000003805765
1.CHECK PUSH-BUTTON IGNITION SWITCH INPUT SIGNAL
1. Turn ignition switch OFF.
2. Disconnect push-button ignition switch connector.
3. Check voltage between push-button ignition switch harness connector and ground.
Is the inspection result normal?
YES >> GO TO 2.
NO >> Check the following.
10A fuse [No.9, located in fuse block (J/B)]
Harness for open or short between push-button ignition switch and fuse
2.CHECK PUSH-BUTTON IGNITION SWITCH CIRCUIT
1. Disconnect BCM connector.
2. Check continuity between BCM harness connector and push-button ignition switch harness connector.
3. Check continuity between BCM harness connector and ground.
Te s t i t e m D e s c r i p t i o n
LOCK INDICATOR
ACC INDICATOR
IGNITION ON INDON
Position indicator Illuminates
OFF Does not illuminate
(+)
(–)Voltage (V)
(Approx.) Push-button ignition switch
Connector Terminal
M101 8 Ground Battery voltage
IndicatorBCM Push-button ignition switch
Continuity
Connector Terminal Connector Terminal
LOCK M123 134
M1015
Existed ACC M119 15 6
ON M122 93 7
Page 3458 of 5121
![NISSAN TEANA 2008 Service Manual PCS
PUSH-BUTTON IGNITION SWITCH POSITION INDICATOR
PCS-67
< COMPONENT DIAGNOSIS >[POWER DISTRIBUTION SYSTEM]
C
D
E
F
G
H
I
J
K
L B A
O
P NIs the inspection result normal?
YES >> GO TO 3.
NO >> Repair NISSAN TEANA 2008 Service Manual PCS
PUSH-BUTTON IGNITION SWITCH POSITION INDICATOR
PCS-67
< COMPONENT DIAGNOSIS >[POWER DISTRIBUTION SYSTEM]
C
D
E
F
G
H
I
J
K
L B A
O
P NIs the inspection result normal?
YES >> GO TO 3.
NO >> Repair](/manual-img/5/57391/w960_57391-3457.png)
PCS
PUSH-BUTTON IGNITION SWITCH POSITION INDICATOR
PCS-67
< COMPONENT DIAGNOSIS >[POWER DISTRIBUTION SYSTEM]
C
D
E
F
G
H
I
J
K
L B A
O
P NIs the inspection result normal?
YES >> GO TO 3.
NO >> Repair or replace harness.
3.CHECK PUSH-BUTTON IGNITION SWITCH
Refer to PCS-67, "
Component Inspection".
Is the inspection result normal?
YES >> GO TO 4.
NO >> Replace push-button ignition switch. Refer to PCS-127, "
Removal and Installation".
4.CHECK INTERMITTENT INCIDENT
Refer to GI-35, "
Intermittent Incident".
>> INSPECTION END
Component InspectionINFOID:0000000003805766
1.CHECK PUSH-BUTTON IGNITION SWITCH
1. Turn ignition switch OFF.
2. Disconnect push-button ignition switch connector.
3. Check continuity between push-button ignition switch terminals.
Is the inspection result normal?
YES >> INSPECTION END
NO >> Replace push-button ignition switch. Refer to PCS-127, "
Removal and Installation".
IndicatorBCM
GroundContinuity
Connector Terminal
LOCK M123 134
Not existed ACC M119 15
ON M122 93
Te r m i n a l
Continuity Push-button ignition switch
(+) (-)
58Not existed
85Existed
68Not existed
86Existed
78Not existed
87Existed
Page 3459 of 5121
PCS-68
< COMPONENT DIAGNOSIS >[POWER DISTRIBUTION SYSTEM]
POWER DISTRIBUTION SYSTEM
POWER DISTRIBUTION SYSTEM
Wiring Diagram - PDS (POWER DISTRIBUTION SYSTEM) -INFOID:0000000003845532
JCMWM1686GB
Page 3460 of 5121
PCS
POWER DISTRIBUTION SYSTEM
PCS-69
< COMPONENT DIAGNOSIS >[POWER DISTRIBUTION SYSTEM]
C
D
E
F
G
H
I
J
K
L B A
O
P N
JCMWM1687GB
Page 3461 of 5121
PCS-70
< COMPONENT DIAGNOSIS >[POWER DISTRIBUTION SYSTEM]
POWER DISTRIBUTION SYSTEM
JCMWM1688GB
Page 3462 of 5121
PCS
POWER DISTRIBUTION SYSTEM
PCS-71
< COMPONENT DIAGNOSIS >[POWER DISTRIBUTION SYSTEM]
C
D
E
F
G
H
I
J
K
L B A
O
P N
JCMWM1689GB
Page 3463 of 5121
PCS-72
< COMPONENT DIAGNOSIS >[POWER DISTRIBUTION SYSTEM]
POWER DISTRIBUTION SYSTEM
JCMWM1690GB
Page 3464 of 5121
![NISSAN TEANA 2008 Service Manual PCS
BCM (BODY CONTROL MODULE)
PCS-73
< ECU DIAGNOSIS >[POWER DISTRIBUTION SYSTEM]
C
D
E
F
G
H
I
J
K
L B A
O
P N
ECU DIAGNOSIS
BCM (BODY CONTROL MODULE)
Reference ValueINFOID:0000000003880874
VALUES ON NISSAN TEANA 2008 Service Manual PCS
BCM (BODY CONTROL MODULE)
PCS-73
< ECU DIAGNOSIS >[POWER DISTRIBUTION SYSTEM]
C
D
E
F
G
H
I
J
K
L B A
O
P N
ECU DIAGNOSIS
BCM (BODY CONTROL MODULE)
Reference ValueINFOID:0000000003880874
VALUES ON](/manual-img/5/57391/w960_57391-3463.png)
PCS
BCM (BODY CONTROL MODULE)
PCS-73
< ECU DIAGNOSIS >[POWER DISTRIBUTION SYSTEM]
C
D
E
F
G
H
I
J
K
L B A
O
P N
ECU DIAGNOSIS
BCM (BODY CONTROL MODULE)
Reference ValueINFOID:0000000003880874
VALUES ON THE DIAGNOSIS TOOL
CONSULT-III MONITOR ITEM
Monitor Item Condition Value/Status
FR WIPER HIOther than front wiper switch HI Off
Front wiper switch HI On
FR WIPER LOWOther than front wiper switch LO Off
Front wiper switch LO On
FR WASHER SWFront washer switch OFF Off
Front washer switch ON On
FR WIPER INTOther than front wiper switch INT Off
Front wiper switch INT On
FR WIPER STOPFront wiper is not in STOP position Off
Front wiper is in STOP position On
INT VOLUME Wiper intermittent dial is in a dial position 1 - 7 Wiper intermittent dial position
TURN SIGNAL ROther than turn signal switch RH Off
Turn signal switch RH On
TURN SIGNAL LOther than turn signal switch LH Off
Turn signal switch LH On
TAIL LAMP SWOther than lighting switch 1ST and 2ND Off
Lighting switch 1ST or 2ND On
HI BEAM SWOther than lighting switch HI Off
Lighting switch HI On
HEAD LAMP SW 1Other than lighting switch 2ND Off
Lighting switch 2ND On
HEAD LAMP SW 2Other than lighting switch 2ND Off
Lighting switch 2ND On
PA S S I N G S WOther than lighting switch PASS Off
Lighting switch PASS On
AUTO LIGHT SWOther than lighting switch AUTO Off
Lighting switch AUTO On
FR FOG SWFront fog lamp switch OFF Off
Front fog lamp switch ON On
RR FOG SWRear fog lamp switch OFF Off
Rear fog lamp switch ON On
DOOR SW-DRDriver door closed Off
Driver door opened On
DOOR SW-ASPassenger door closed Off
Passenger door opened On
DOOR SW-RRRear RH door closed Off
Rear RH door opened On