Page 3649 of 5121

REAR POWER WINDOW SWITCH
PWC-19
< COMPONENT DIAGNOSIS >
C
D
E
F
G
H
I
J
L
MA
B
PWC
N
O
P
4. Check continuity between power window main switch harness connector and ground.
Is the inspection result normal?
YES >> Replace power window main switch. Refer to PWC-85, "Removal and Installation".
NO >> Repair or replace harness.
4.CHECK INTERMITTENT INCIDENT
Refer to GI-35, "
Intermittent Incident".
>> INSPECTION END
Component InspectionINFOID:0000000003826009
1.CHECK REAR POWER WINDOW SWITCH
1. Turn ignition switch OFF.
2. Disconnect rear power window switch connector.
3. Check rear power window switch.
Is the inspection result normal?
YES >> INSPECTION END
NO >> Replace rear power window switch. Refer to PWC-87, "
Removal and Installation".
Power window main switchRear power window switch
Continuity
Connector Terminal Connector Terminal
D51
LH D832
Existed 33
5
RH D1033
72
Power window main switch
GroundContinuity
Connector Terminal
D51
Not existed 3
5
7
Rear power window
switchTe r m i n a lRear power window
switch conditionContinuity
D83 (LH)
D103 (RH)15
UP
Existed 34
34
NEUTRAL
25
14
DOWN
25
Page 3650 of 5121

PWC-20
< COMPONENT DIAGNOSIS >
POWER WINDOW MOTOR
POWER WINDOW MOTOR
DRIVER SIDE
DRIVER SIDE : DescriptionINFOID:0000000003826010
Door glass moves UP/DOWN by receiving the signal from power window main switch.
DRIVER SIDE : Component Function CheckINFOID:0000000003826011
1. CHECK FRONT POWER WINDOW MOTOR (DRIVER SIDE) OPERATION
Check front power window motor (driver side) operation with power window main switch.
Is the inspection result normal?
YES >> Front power window motor (driver side) is OK.
NO >> Refer to PWC-20, "
DRIVER SIDE : Diagnosis Procedure".
DRIVER SIDE : Diagnosis ProcedureINFOID:0000000003826012
1.CHECK POWER WINDOW MOTOR (DRIVER SIDE) INPUT SIGNAL
1. Turn ignition switch OFF.
2. Disconnect front power window motor (driver side) connector.
3. Turn ignition switch ON.
4. Check voltage between power window motor (driver side) harness connector and ground.
Is the inspection result normal?
YES >> GO TO 3.
NO >> GO TO 2.
2.CHECK POWER WINDOW MOTOR CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect power window main switch connector.
3. Check continuity between power window main switch harness connector and front power window motor
(driver side) harness connector.
4. Check continuity between power window main switch harness connector and ground.
Is the inspection result normal?
YES >> Replace power window main switch.Refer to PWC-85, "Removal and Installation".
NO >> Repair or replace harness.
(+)
(–) ConditionVoltage (V)
(Approx.) Power window motor (driver side)
Connector Terminal
D71
GroundPower window
main switchUP 0
DOWN Battery voltage
2UP Battery voltage
DOWN 0
Power window main switch Front power window motor (driver side)
Continuity
Connector Terminal Connector Terminal
D512
D71
Existed
16 2
Power window main switch
GroundContinuity
Connector Terminal
D512
Not existed
16
Page 3651 of 5121

POWER WINDOW MOTOR
PWC-21
< COMPONENT DIAGNOSIS >
C
D
E
F
G
H
I
J
L
MA
B
PWC
N
O
P
3.CHECK FRONT POWER WINDOW MOTOR (DRIVER SIDE)
Check front power window motor (driver side).
Refer to PWC-21, "
DRIVER SIDE : Component Inspection".
Is the inspection result normal?
YES >> GO TO 4.
NO >> Replace power window motor (driver side). Refer to GW-20, "
Removal and Installation".
4.CHECK INTERMITTENT INCIDENT
Refer to GI-35, "
Intermittent Incident".
>> INSPECTION END
DRIVER SIDE : Component InspectionINFOID:0000000003826013
1.CHECK FRONT POWER WINDOW MOTOR (DRIVER SIDE)
1. Turn ignition switch OFF.
2. Disconnect front power window motor (driver side) connector.
3. Check motor operation by connecting the battery voltage directly to front power window motor (driver side)
connector.
Is the inspection result normal?
YES >> INSPECTION END
NO >> Replace front power window motor (driver side). Refer to GW-20, "
Removal and Installation".
PASSENGER SIDE
PASSENGER SIDE : DescriptionINFOID:0000000003826014
Door glass moves UP/DOWN by receiving the signal from power window main switch or front power window
switch (passenger side).
PASSENGER SIDE : Component Function CheckINFOID:0000000003826015
1. CHECK FRONT POWER WINDOW MOTOR (PASSENGER SIDE) OPERATION
Check front power window motor (passenger side) operation with power window main switch or front power
window switch (passenger side).
Is the inspection result normal?
YES >> Power window motor (passenger side) is OK.
NO >> Refer to PWC-21, "
PASSENGER SIDE : Diagnosis Procedure".
PASSENGER SIDE : Diagnosis ProcedureINFOID:0000000003826016
1.CHECK FRONT POWER WINDOW MOTOR (PASSENGER SIDE) INPUT SIGNAL
1. Turn ignition switch OFF.
2. Disconnect front power window motor (passenger side) connector.
3. Turn ignition switch ON.
4. Check voltage between front power window motor (passenger side) harness connector and ground.
Front power window motor
(driver side)Te r m i n a l
Motor condition
(+) (–)
D712DOWN
21UP
Page 3652 of 5121

PWC-22
< COMPONENT DIAGNOSIS >
POWER WINDOW MOTOR
Is the inspection result normal?
YES >> GO TO 3.
NO >> GO TO 2.
2.CHECK FRONT POWER WINDOW MOTOR (PASSENGER SIDE) CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect front power window switch (passenger side) connector.
3. Check continuity between front power window switch (passenger side) harness connector and front power
window motor (passenger side) harness connector.
4. Check continuity between front power window switch (passenger side) harness connector and ground.
Is the inspection result normal?
YES >> Replace front power window switch (passenger side). Refer to PWC-86, "Removal and Installa-
tion".
NO >> Repair or replace harness.
3.CHECK FRONT POWER WINDOW MOTOR (PASSENGER SIDE)
Check front power window motor (passenger side).
Refer to PWC-22, "
PASSENGER SIDE : Component Inspection".
Is the inspection result normal?
YES >> GO TO 4.
NO >> Replace front power window motor (passenger side). Refer to GW-20, "
Removal and Installation".
4.CHECK INTERMITTENT INCIDENT
Refer to GI-35, "
Intermittent Incident".
>> INSPECTION END
PASSENGER SIDE : Component InspectionINFOID:0000000003826017
1.CHECK FRONT POWER WINDOW MOTOR (PASSENGER SIDE)
1. Turn ignition switch OFF.
2. Disconnect front power window motor (passenger side) connector.
3. Check motor operation by connecting the battery voltage directly to front power window motor (passenger
side) connector.
(+)
(–) ConditionVoltage (V)
(Approx.) Front power window motor
(passenger side)
Connector Terminal
D461
GroundFront power win-
dow switch
(passenger side)UP 0
DOWN Battery voltage
2UP Battery voltage
DOWN 0
Front power window switch (passenger side) Front power window motor (passenger side)
Continuity
Connector Terminal Connector Terminal
D454
D461
Existed
52
Front power window switch (passenger side)
GroundContinuity
Connector Terminal
D454
Not existed
5
Page 3653 of 5121

POWER WINDOW MOTOR
PWC-23
< COMPONENT DIAGNOSIS >
C
D
E
F
G
H
I
J
L
MA
B
PWC
N
O
P
Is the inspection result normal?
YES >> INSPECTION END
NO >> Replace front power window motor (passenger side). Refer to GW-20, "
Removal and Installation".
REAR LH
REAR LH : DescriptionINFOID:0000000003826018
Door glass moves UP/DOWN by receiving the signal from power window main switch or rear power window
switch LH.
REAR LH : Component Function CheckINFOID:0000000003826019
1.CHECK REAR POWER WINDOW MOTOR LH OPERATION
Check rear power window motor LH operation with power window main switch or rear power window switch
LH.
Is the inspection result normal?
YES >> Rear power window motor LH is OK.
NO >> Refer to PWC-23, "
REAR LH : Diagnosis Procedure"
REAR LH : Diagnosis ProcedureINFOID:0000000003826020
1.CHECK REAR POWER WINDOW MOTOR LH INPUT SIGNAL
1. Turn ignition switch OFF.
2. Disconnect rear power window motor LH connector.
3. Turn ignition switch ON.
4. Check voltage between rear power window motor LH harness connector and ground.
Is the inspection result normal?
YES >> GO TO 3.
NO >> GO TO 2.
2.CHECK REAR POWER WINDOW MOTOR LH CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect rear power window switch LH connector.
3. Check continuity between rear power window switch LH harness connector and rear power window motor
LH harness connector.
4. Check continuity between rear power window switch LH connector and ground.
Front power window motor
(passenger side) connectorTe r m i n a l
Motor condition
(+) (–)
D4612DOWN
21UP
(+)
(–) ConditionVoltage (V)
(Approx.) Rear power window motor LH
Connector Terminal
D821
GroundRear power win-
dow switch LHUP Battery voltage
DOWN 0
3UP 0
DOWN Battery voltage
Rear power window switch LH Rear power window motor LH
Continuity
Connector Terminal Connector Terminal
D834
D823
Existed
51
Page 3654 of 5121

PWC-24
< COMPONENT DIAGNOSIS >
POWER WINDOW MOTOR
Is the inspection result normal?
YES >> Replace rear power window switch LH. Refer to PWC-87, "Removal and Installation".
NO >> Repair or replace harness.
3.CHECK REAR POWER WINDOW MOTOR LH
Check rear power window motor LH.
Refer to PWC-24, "
REAR LH : Component Inspection".
Is the inspection result normal?
YES >> GO TO 4.
NO >> Replace rear power window motor LH. Refer to GW-25, "
Removal and Installation".
4.CHECK INTERMITTENT INCIDENT
Refer to GI-35, "
Intermittent Incident".
>> INSPECTION END
REAR LH : Component InspectionINFOID:0000000003826021
COMPONENT INSPECTION
1.CHECK REAR POWER WINDOW MOTOR LH
1. Turn ignition switch OFF.
2. Disconnect rear power window motor LH connector.
3. Check motor operation by connecting the battery voltage directly to rear power window motor LH connec-
tor.
Is the inspection result normal?
YES >> INSPECTION END
NO >> Replace rear power window motor LH. Refer to GW-25, "
Removal and Installation".
REAR RH
REAR RH : DescriptionINFOID:0000000003826022
Door glass moves UP/DOWN by receiving the signal from power window main switch or rear power window
switch RH.
REAR RH : Component Function CheckINFOID:0000000003826023
1. CHECK REAR POWER WINDOW MOTOR RH OPERATION
Check rear power window motor RH operation with power window main switch or rear power window switch
RH.
Is the inspection result normal?
YES >> Rear power window motor RH is OK.
NO >> Refer to PWC-25, "
REAR RH : Diagnosis Procedure".
Rear power window switch LH
GroundContinuity
Connector Terminal
D834
Not existed
5
Rear power window motor LHTe r m i n a l
Motor condition
(+) (–)
D8231DOWN
13UP
Page 3655 of 5121

POWER WINDOW MOTOR
PWC-25
< COMPONENT DIAGNOSIS >
C
D
E
F
G
H
I
J
L
MA
B
PWC
N
O
P
REAR RH : Diagnosis ProcedureINFOID:0000000003826024
1.CHECK REAR POWER WINDOW MOTOR RH INPUT SIGNAL
1. Turn ignition switch OFF.
2. Disconnect rear power window motor RH connector.
3. Turn ignition switch ON.
4. Check voltage between rear power window motor RH harness connector and ground.
Is the inspection result normal?
YES >> GO TO 3.
NO >> GO TO 2.
2.CHECK REAR POWER WINDOW MOTOR RH CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect rear power window switch RH connector.
3. Check continuity between rear power window switch RH harness connector and rear power window motor
RH harness connector.
4. Check continuity between rear power window switch RH harness connector and ground.
Is the inspection result normal?
YES >> Replace rear power window switch RH. Refer to PWC-87, "Removal and Installation".
NO >> Repair or replace harness.
3.CHECK REAR POWER WINDOW MOTOR RH
Check rear power window motor RH.
Refer to PWC-26, "
REAR RH : Component Inspection".
Is the inspection result normal?
YES >> GO TO 4.
NO >> Replace rear power window motor RH. Refer to GW-25, "
Removal and Installation".
4.CHECK INTERMITTENT INCIDENT
Refer to GI-35, "
Intermittent Incident".
>> INSPECTION END
(+)
(–) ConditionVoltage (V)
(Approx.) Rear power window motor RH
Connector Terminal
D1021
GroundRear power win-
dow switch RH UP Battery voltage
DOWN 0
3UP 0
DOWN Battery voltage
Rear power window switch RHRear power window motor RH
Continuity
Connector Terminal Connector Terminal
D1034
D1023
Existed
51
Rear power window switch RH
GroundContinuity
Connector Terminal
D1034
Not existed
5
Page 3656 of 5121
PWC-26
< COMPONENT DIAGNOSIS >
POWER WINDOW MOTOR
REAR RH : Component Inspection
INFOID:0000000003826025
COMPONENT INSPECTION
1.CHECK REAR POWER WINDOW MOTOR RH
1. Turn ignition switch OFF.
2. Disconnect rear power window motor RH connector.
3. Check motor operation by connecting the battery voltage directly to rear power window motor RH connec-
tor.
Is the inspection result normal?
YES >> INSPECTION END
NO >> Replace rear power window motor RH. Refer to GW-25, "
Removal and Installation".
Rear power window motor RHTe r m i n a l
Motor condition
(+) (–)
D10231DOWN
13UP