2008 NISSAN TEANA stereo

AV
AV CONTROL UNIT
AV-111
< ECU DIAGNOSIS >[BASE AUDIO AND DISPLAY SYSTEM]
C
D
E
F
G
H
I
J
K
L
MB A
O
P
*:Stereo sounds are input only when the 2 channel stereo sound is played.96
(B)97
(R)AUX sound signal LH InputIgnition
switch
ONAUX sound input.
101
(BR)Ground Switch ground —Ignition
switch
ON—0 V
103
(SB)Ground Disk eject signal InputIgnition
switch
ONPressing the eject switch. 0 V
Except for above. 3.3 V
104
(O)Ground Ignition signal InputIgnition
switch
ON— Battery voltage
105
(P/B)Ground Reverse signal InputIgnition
switch
ONSelector lever in R position. 12.0 V
Other than selector lever in
R position.0 V
106
(G/R)Ground Parking brake signal InputIgnition
switch
ONParking brake ON. 0 V
Parking brake OFF.
107
(V/W)GroundVehicle speed signal
(8-pulse)InputIgnition
switch
ONWhen vehicle speed is ap-
prox. 40 km/h (25MPH).NOTE:
The maximum voltage varies de-
pending on the specification
(destination unit).
111 — S h i e l d — — — —Te r m i n a l
(Wire color)Description
ConditionReference value
(Approx.)
+ – Signal nameInput/
Output
SKIB3609E
JSNIA0007GB
JSNIA0012GB

AV
MULTI AV SYSTEM
AV-189
< FUNCTION DIAGNOSIS >[BOSE AUDIO WITHOUT NAVIGATION]
C
D
E
F
G
H
I
J
K
L
MB A
O
P
 Two AV communication lines (H, L) adopt a twisted pair line that is resistant to noise.
 AV control unit is connected by CAN communication, and it receives data signal from ECM, combination
meter. It computes and displays fuel economy information value with the obtained information. Transmitting/
receiving of data signal is performed by BCM. Also, it transmits the required signal of vehicle setting and
receives the response signal.
 AV control unit is connected with display unit and serial communication, and it transmits the required signal
of display and display control and receives the response signal from display unit.
NOTE:
AV control unit can perform CONSULT-III self-operating function and on board self-diagnosis.
 CONSULT-III self diagnosis: Refer to AV- 2 11 , "
CONSULT-III Function (MULTI AV)".
 On board self diagnosis: Refer to AV-200, "
Diagnosis Description".
DVD ENTERTAINMENT SYSTEM
 DVD player is connected with AV control unit via AV communication, and controlled by AV control unit.
 DVD image signal is output from DVD player to display unit via AV control unit.
 DVD stereo (2ch) sound signal is output from DVD player to each speaker via AV control unit and BOSE
amp.
 DVD surround (5.1ch) sound signal is output from DVD player to each speaker via BOSE amp.
 Operation can be performed with multifunction switch, steering switch and rear control switch. Multifunction
switch and rear control switch transmits operation signal to AV control unit by AV communication.
AUXILIARY INPUT SYSTEM
 Image and sound can be output from an external device by connecting a device with auxiliary input jacks.
 Operation can be performed with multifunction switch, steering switch and rear control switch. Multifunction
switch and rear control switch transmits operation signal to AV control unit by AV communication.
JSNIA1299GB
JSNIA1301GB

AV
AV CONTROL UNIT
AV-265
< ECU DIAGNOSIS >[BOSE AUDIO WITHOUT NAVIGATION]
C
D
E
F
G
H
I
J
K
L
MB A
O
P83
(R)82
(W)Stereo (DVD and AUX)
sound signal RHInputIgnition
switch
ONDVD* and AUX sound out-
put.
85
(B/W)Ground Ground —Ignition
switch
ON —0 V
86
(L)—CAN–HInput/
Output—— —
87
(P)—CAN–LInput/
Output—— —
88
(W)—AV communication signal
(H)Input/
Output—— —
89
(B)—AV communication signal
(L)Input/
Output—— —
90
(L)—AV communication signal
(H)Input/
Output—— —
91
(R)—AV communication signal
(L)Input/
Output—— —
99
(B)98
(G)Stereo (DVD and AUX)
sound signal LHInputIgnition
switch
ONDVD
*or AUX sound output.
100 — Shield — — — —
101
(BR)Ground Switch ground —Ignition
switch
ON—0 V
103
(SB)Ground Disk eject signal InputIgnition
switch
ONPressing the eject switch. 0 V
Except for above. 3.3 V
104
(O)Ground Ignition signal InputIgnition
switch
ON— Battery voltage
105
(P/B)Ground Reverse signal InputIgnition
switch
ONSelector lever in R position. 12.0 V
Other than selector lever in
R position.0 V Te r m i n a l
(Wire color)Description
ConditionReference value
(Approx.)
+ – Signal nameInput/
Output
SKIB3609E
SKIB3609E

AV-266
< ECU DIAGNOSIS >[BOSE AUDIO WITHOUT NAVIGATION]
AV CONTROL UNIT
*:Stereo sounds are input only when the 2 channel stereo sound is played.106
(G/R)Ground Parking brake signal InputIgnition
switch
ONParking brake ON. 0 V
Parking brake OFF.
107
(V/W)GroundVehicle speed signal
(8-pulse)InputIgnition
switch
ONWhen vehicle speed is ap-
prox. 40 km/h (25MPH).NOTE:
The maximum voltage varies de-
pending on the specification
(destination unit).
109
(W)11 5
(B)Stereo sound signal front
RHOutputIgnition
switch
ONAudio output
111 — Shield — — — —
11 3
(W)11 9
(B)Stereo sound signal LH OutputIgnition
switch
ONAudio output Terminal
(Wire color)Description
ConditionReference value
(Approx.)
+ – Signal nameInput/
Output
JSNIA0007GB
JSNIA0012GB
SKIB3609E
SKIB3609E

AV
BOSE AMP.
AV-309
< ECU DIAGNOSIS >[BOSE AUDIO WITHOUT NAVIGATION]
C
D
E
F
G
H
I
J
K
L
MB A
O
P13
(R)8
(BR)Sound signal woofer LH OutputIgnition
switch
ONAudio output
14
(L)9
(O)Sound signal rear speaker
RHOutputIgnition
switch
ONAudio output
18
(W)19
(B)Sound signal front speaker
LHOutputIgnition
switch
ONAudio output
20
(V)Ground ACC power supply InputIgnition
switch
ACC— 12.0 V
24
(B)23
(W)Stereo sound signal front
LHInputIgnition
switch
ONAudio output
26
(W/R)25
(B/R)Stereo sound signal front
RHInputIgnition
switch
ONAudio output
28
(G)15
(R)Sound signal rear speaker
LHOutputIgnition
switch
ONAudio output Te r m i n a l
(Wire color)Description
ConditionReference value
(Approx.)
+ – Signal nameInput/
Output
SKIB3609E
SKIB3609E
SKIB3609E
SKIB3609E
SKIB3609E
SKIB3609E

AV
DVD PLAYER
AV-331
< ECU DIAGNOSIS >[BOSE AUDIO WITHOUT NAVIGATION]
C
D
E
F
G
H
I
J
K
L
MB A
O
P13
(B)11
(G)AUX sound signal LH InputIgnition
switch
ONAUX sound output.
14
(W)12
(R)AUX sound signal RH InputIgnition
switch
ONAUX sound output.
15 — AUX sound signal shield — — — —
21
(B)22
(G)Stereo (DVD and AUX
sound) sound signal LH OutputIgnition
switch
ONDVD
*1 or AUX sound out-
put.
23
(R)24
(W)Stereo (DVD and AUX
sound) sound signal RH OutputIgnition
switch
ONDVD
*1 or AUX sound out-
put.
25 — Stereo sound signal shield — — — —
29
(R)—AV communication signal
(L)Input/
Output—— —
30
(L)—AV communication signal
(H)Input/
Output—— —
31
(P)—AV communication signal
(L)Input/
Output—— —
32
(L)—AV communication signal
(H)Input/
Output—— —
34 — Shield — — — —
36
(W)35
(B)Surround sound signal front
RHOutputIgnition
switch
ONDVD sound output.
*2
Te r m i n a l
(Wire color)Description
ConditionReference value
(Approx.)
+ – Signal nameInput/
Output
SKIB3609E
SKIB3609E
SKIB3609E
SKIB3609E
SKIB3609E

AV-332
< ECU DIAGNOSIS >[BOSE AUDIO WITHOUT NAVIGATION]
DVD PLAYER
 *1: Stereo sounds are input only when the 2 channel stereo sound is played.
 *2: All surround sounds are input only when the 5.1 channel surround sound is played.38
(W)37
(B)Surround sound signal front
LHOutputIgnition
switch
ONDVD sound output.
*2
40
(W)39
(B)Surround sound signal cen-
terOutputIgnition
switch
ONDVD sound output.*2
42
(L)41
(R)Surround sound signal
wooferOutputIgnition
switch
ONDVD sound output.*2
43 — Shield — — — —
44 — Shield — — — —
46
(W)45
(B)Surround sound signal rear
RHOutputIgnition
switch
ONDVD sound output.
*2
48
(W)47
(B)Surround sound signal rear
LHOutputIgnition
switch
ONDVD sound output.*2
Terminal
(Wire color)Description
ConditionReference value
(Approx.)
+ – Signal nameInput/
Output
SKIB3609E
SKIB3609E
SKIB3609E
SKIB3609E
SKIB3609E

AV-402
< FUNCTION DIAGNOSIS >[BOSE AUDIO WITH NAVIGATION]
MULTI AV SYSTEM
 AV control unit is connected by CAN communication, and it receives data signal from ECM, combination
meter. It computes and displays fuel economy information value with the obtained information. Transmitting/
receiving of data signal is performed by BCM. Also, it transmits the required signal of vehicle setting and
receives the response signal.
 AV control unit is connected with display unit and serial communication, and it transmits the required signal
of display and display control and receives the response signal from display unit.
NOTE:
AV control unit can perform CONSULT-III self-operating function and on board self-diagnosis.
 CONSULT-III self diagnosis: Refer to AV-434, "
CONSULT-III Function (MULTI AV)".
 On board self diagnosis: Refer to AV-419, "
Diagnosis Description".
HANDS-FREE PHONE SYSTEM
 Hands-free communication can be operated by connecting using Bluetooth™ communication with cellular
phone.
 Operation is performed by display unit (touch panel), multifunction switch or steering switch, and operating
condition is indicated on display unit.
When a call is originated
Spoken voice sound output from the microphone (Mic. Signal) is input to NAVI control unit. NAVI control unit
outputs to cellular phone via TEL antenna with Bluetooth
™ communication as a TEL voice signal. Voice sound
is then heard at the other party.
When receiving a call
Voice sound is input to own cellular phone from the other party. The cellular phone outputs the voice signal to
TEL antenna by establishing Bluetooth
™ communication. The signal from TEL antenna is sent to front speaker
via NAVI control unit, AV control unit, and BOSE amp.
DVD ENTERTAINMENT SYSTEM
 DVD player is connected with AV control unit via AV communication, and controlled by AV control unit.
 DVD image signal is output from DVD player to display unit via AV control unit.
 DVD stereo (2ch) sound signal is output from DVD player to each speaker via AV control unit and BOSE
amp.
 DVD surround (5.1ch) sound signal is output from DVD player to each speaker via BOSE amp.
JSNIA1305GB