2003 NISSAN TEANA Service Manual

check oillow oil pressurefuse boxTPMSmanual transmissionair bleeding
Popular search:
instrument paneldoor locklengthengine oilcenter consoleweightseat memory
Previous
Next
Load previous 8 pages

Page 2969 of 3502

NISSAN TEANA 2003 Service Manual ENGINE OIL LU-19 [VQ] C D E F G H I J K L MA LU ENGINE OILPFP:KLA92 InspectionBBS004WK ENGINE OIL LEVEL NOTE: Before starting engine, put vehicle horizontally and check the engine oil level. If engi

Page 2970 of 3502

NISSAN TEANA 2003 Service Manual LU-20 [VQ] ENGINE OIL OIL PRESSURE CHECK WARNING: Be careful not to burn yourself, as engine oil may be hot. Oil pressure check should be done in “Parking position”. 1. Check engine oil level.

Page 2971 of 3502

NISSAN TEANA 2003 Service Manual ENGINE OIL LU-21 [VQ] C D E F G H I J K L MA LU Changing Engine OilBBS004WL WARNING: Be careful not to burn yourself, as engine oil may be hot. Prolonged and repeated contact with used engine oil

Page 2972 of 3502

NISSAN TEANA 2003 Service Manual LU-22 [VQ] OIL FILTER OIL FILTERPFP:15208 Removal and InstallationBBS004WM REMOVAL 1. Remove splash guard (RH). 2. Using oil filter wrench (SST), remove oil filter. CAUTION: Oil filter is provided

Page 2973 of 3502

NISSAN TEANA 2003 Service Manual OIL COOLER (VQ35DE) LU-23 [VQ] C D E F G H I J K L MA LU OIL COOLER (VQ35DE)PFP:21305 Removal and InstallationBBS004WN Refer to GI-10, "Components" for symbol marks in the figure. WARNING: Be care

Page 2974 of 3502

NISSAN TEANA 2003 Service Manual LU-24 [VQ] OIL COOLER (VQ35DE) CAUTION: Perform this step when engine is cold. Do not spill engine coolant on drive belts. 5. Remove connector bolt, and remove oil cooler. CAUTION: Do not spill en

Page 2975 of 3502

NISSAN TEANA 2003 Service Manual OIL PUMP LU-25 [VQ] C D E F G H I J K L MA LU OIL PUMPPFP:15010 Removal and InstallationBBS004WO REMOVAL 1. Remove oil pans (lower and upper) and oil strainer. Refer to EM-145, "OIL PAN AND OIL STRA

Page 2976 of 3502

NISSAN TEANA 2003 Service Manual LU-26 [VQ] OIL PUMP INSPECTION AFTER DISASSEMBLY Oil Pump Clearance Measure the clearance with feeler gauge. –Clearance between oil pump outer rotor and oil pump body (Position “1”) –Tip cl
Load next 8 pages
Page:   < prev 1-10 ... 2937-2944 2945-2952 2953-2960 2961-2968 2969-2976 2977-2984 2985-2992 2993-3000 3001-3008 ... 3504 next >
sunroofcoolant levelremote controlwheel boltscoolant reservoiroil filter
Popular search:
lightfuel cap releaseopen gas tankclimate controlground clearanceUnified meteroil viscosity