Page 241 of 3502
ON-VEHICLE SERVICE
AT-233
D
E
F
G
H
I
J
K
L
MA
B
AT
Revolution Sensor ReplacementBCS00157
COMPONENTS
REMOVAL AND INSTALLATION
Removal
1. Remove front tire LH from vehicle.
2. Remove LH splash guard. (Front fender side)
3. Disconnect revolution sensor harness connector.
4. Remove revolution sensor from transaxle assembly.
5. Remove O-ring from revolution sensor.
Installation
Note the following, and install in the reverse order of removal.
1. A/T 2. Revolution sensor 3. O-ring
SCIA4864E
SCIA2783E
SCIA2788E
Page 242 of 3502
AT-234
ON-VEHICLE SERVICE
CAUTION:
Do not reuse O-ring.
Apply petroleum jelly to O-ring.
Be careful not to mis-connect because shape of connectors
are same as turbine revolution sensor (power train revolu-
tion sensor).
NOTE:
For prevent mis-connection, revolution sensor harness connec-
tor is color taped for identification.
Turbine Revolution Sensor (Power Train Revolution Sensor) ReplacementBCS00158
COMPONENTS
SCIA5007E
1. A/T 2. Turbine revolution sensor (power
train revolution sensor)3. O-ring
SCIA4865E
Page 243 of 3502
ON-VEHICLE SERVICE
AT-235
D
E
F
G
H
I
J
K
L
MA
B
AT
REMOVAL AND INSTALLATION
Removal
1. Remove front tire LH from vehicle.
2. Remove LH splash guard. (Front fender side)
3. Disconnect turbine revolution sensor (power train revolution
sensor) harness connector.
4. Remove turbine revolution sensor (power train revolution sen-
sor) from transaxle assembly.
5. Remove O-ring from turbine revolution sensor (power train revo-
lution sensor).
Installation
Note the following, and install in the reverse order of removal.
CAUTION:
Do not reuse O-ring.
Apply petroleum jelly to O-ring.
Be careful not to mis-connect because shape of connectors
are same as revolution sensor.
NOTE:
For prevent mis-connection, revolution sensor harness connec-
tor is color taped for identification.
SCIA2783E
SCIA2790E
SCIA5007E
Page 244 of 3502
AT-236
AIR BREATHER HOSE
AIR BREATHER HOSEPFP:31098
Removal and Installation [Air Breather Hose (Oil Catch Tank to Air Duct)]BCS00159
COMPONENTS (OIL CATCH TANK TO AIR DUCT)
For QR20DE engine models
SCIA2590E
1. Air duct 2. Air breather hose (air duct side) 3. Oil catch tank
Page 245 of 3502
AIR BREATHER HOSE
AT-237
D
E
F
G
H
I
J
K
L
MA
B
AT
For VQ23DE engine models
SCIA2589E
1. Air duct 2. Resonator 3. Air breather hose (air duct side)
4. Oil catch tank
Page 246 of 3502

AT-238
AIR BREATHER HOSE
REMOVAL AND INSTALLATION (QR20DE ENGINE MODELS)
During removal and installation of air breather hose (air duct side) be careful of the following.
Secure a mark (A) when installing air breather hose (air duct
side) to air duct so as to see the mark.
Install air breather hose (air duct side) to oil catch tank with a
mark (B) facing up. Insert air breather hose into oil catch tank
until it reaches the point where the winding radius stops.
CAUTION:
When installing an air breather hose (air duct side), be careful
not to be crushed or blocked by folding or bending the hose.
REMOVAL AND INSTALLATION (VQ23DE ENGINE MODELS)
During removal and installation of air breather hose (air duct side) be careful of the following.
Secure a mark (A) when installing air breather hose (air duct
side) to air duct so as not to see the mark.
Install air breather hose (air duct side) to oil catch tank with a
mark (B) facing up. Insert air breather hose into oil catch tank
until it reaches the point where the winding radius stops.
SCIA3022E
SCIA3020E
Page 247 of 3502
AIR BREATHER HOSE
AT-239
D
E
F
G
H
I
J
K
L
MA
B
AT
Assemble air breather hose (air duct side) within 30...aligning air
duct ribs so as not to contact air breather hose (air duct side)
opening with resonator.
Keep air breather hose (air duct side) opening to air duct clamp
clearance for at least 10 mm (0.39 in).
CAUTION:
When installing an air breather hose (air duct side), be careful
not to be crushed or blocked by folding or bending the hose.
Removal and Installation [Oil Catch Tank and Air Breather Hose (A/T assembly
to Oil catch tank)]
BCS0015A
COMPONENTS (A/T ASSEMBLY TO OIL CATCH TANK)
SCIA3144E
SCIA7834E
1. A/T 2. Starter motor 3. LH front side member
4. Oil catch tank 5. Air breather hose (A/T side)
SCIA4860E
Page 248 of 3502
AT-240
AIR BREATHER HOSE
REMOVAL AND INSTALLATION
Removal
1. Remove air duct. Refer to EM-131, "AIR CLEANER AND AIR DUCT" .
2. Remove air breather hose (air duct side and A/T side) from oil catch tank.
3. Remove oil catch tank from vehicle.
Installation
Note the following, and install in the reverse order of removal.
Insert air breather hose (A/T side) [B] into tube stopper when
installing air breather hose (A/T side) to oil catch tank.
Insert air breather hose (A/T side) [A] into the point where the
winding radius stops when installing air breather hose (A/T side)
to A/T assembly.
Install air breather hose (air duct side). Refer to AT- 2 3 6 ,
"Removal and Installation [Air Breather Hose (Oil Catch Tank to
Air Duct)]" .
CAUTION:
When installing an air breather hose (A/T side), be careful not to
be crushed or blocked by folding or bending the hose.
SCIA7835E