2005 INFINITI FX35 Service Manual

Page 329 of 4731

INFINITI FX35 2005  Service Manual AT-246
ON-VEHICLE SERVICE
Revision: 2005 July 2005 FX
16. Remove control valve with TCM from transmission case. 
CAUTION: 
When removing, be careful with the manual valve notch and
manual plate height

Page 330 of 4731

INFINITI FX35 2005  Service Manual ON-VEHICLE SERVICE AT-247
D E 
F 
G  H 
I 
J 
K  L 
M  A 
B
AT 
Revision: 2005 July  2005 FX
21. Remove A/T assembly harness connector from control valve 
with TCM using a flat-bladed screwdriver. 
22

Page 331 of 4731

INFINITI FX35 2005  Service Manual AT-248
ON-VEHICLE SERVICE
Revision: 2005 July 2005 FX
3. Connect TCM connectors. 
4. Install O-ring in A/T assembly harness connector. 
CAUTION:
Do not reuse O-ring.
Apply ATF to O-ring. 
5. Install

Page 332 of 4731

INFINITI FX35 2005  Service Manual ON-VEHICLE SERVICE AT-249
D E 
F 
G  H 
I 
J 
K  L 
M  A 
B
AT 
Revision: 2005 July  2005 FX
Assemble it so that manual valve cutout is engaged with 
manual plate projection. 
8. Install bolts A, B a

Page 333 of 4731

INFINITI FX35 2005  Service Manual AT-250
ON-VEHICLE SERVICE
Revision: 2005 July 2005 FX
12. Connect revolution sensor connector. 
13. Securely fasten revolution sensor harness with terminal clips.
14. Install magnets in oil pan. 
15.

Page 334 of 4731

INFINITI FX35 2005  Service Manual ON-VEHICLE SERVICE AT-251
D E 
F 
G  H 
I 
J 
K  L 
M  A 
B
AT 
Revision: 2005 July  2005 FX
c. Tighten oil pan mounting bolts to the specified torque in numeri- 
cal order shown in the figure after t

Page 335 of 4731

INFINITI FX35 2005  Service Manual AT-252
ON-VEHICLE SERVICE
Revision: 2005 July 2005 FX
6. Check foreign materials in oil pan to help determine causes of 
malfunction. If the ATF is very dark, smells burned, or contains
foreign partic

Page 336 of 4731

INFINITI FX35 2005  Service Manual ON-VEHICLE SERVICE AT-253
D E 
F 
G  H 
I 
J 
K  L 
M  A 
B
AT 
Revision: 2005 July  2005 FX
Installation
1. Install A/T fluid temperature sensor 2 to bracket. 
2. Install A/T fluid temperature sensor