2006 ACURA CSX Service Repair Manual

horn drain bolt wheelbase tire pressure transmission oil open gas tank

Page 2417 of 2893

ACURA CSX 2006 Service Repair Manual (##
)Î

(##
)
µ
µ
µ
µ
µ
µ
The Honda Globe Screen (not the Acura
Globe Screen) appears every t

(#'#
)Î

(#'#
)
µ
µ
µ
µ
µ
µ
The Honda Globe Screen (not the Acura
Globe Screen) appears every time the vehicle
is started Start-up procedure and Diagnosis Menu
YES
NO
YES
NO
YES
NO
23-13523-135
System Diagnostic Mode
Select Diagnosis Items
Navi System
Monitor Check Unit Check
Car Status GPS Information
Yaw Rate
Tire Calibrate
Functional Setup
VersionReturn
DIAGNOSTIC MENU SCREEN
NOTE: The navigation DVD and the navigation unit are
correct for the vehicle, but earlier and possibly later
versions of the navigation software may have been
installed. When this happens, the software may not be
recognized by the navigation unit, and could cause the
navigation unit to revert to an Acura model profile.
1. Remove the navigation unit (see page 23-155) and verify that the part number printed on the
navigation unit label is the correct one for the year/
model vehicle you are working on.
Go to step 2.
Replace the navigation unit with the correct
unit for the year/model vehicle you are working
on.
2. Reinstall the navigation unit.
3. Remove the navigation DVD (see page 23-155).
4. Note the software version marked on the navigation DVD label and verify if it is the correct
version for the vehicle year/model you are working
on by checking any official Honda service website
for more service information about the navigation
system and navigation software.
Replace the navigation unit (see page 23-155).
Go to step 5.
5. Obtain the correct version DVD (see page 23-94), and install it.
The problem is resolved, troubleshooting is
complete. The system still shows an Honda Globe
Screen. Replace the navigation unit (see page
23-155). 1. Turn the ignition switch to ON (II).
Press and hold the Menu, the Map/Guide, and the
Cancel buttons, for about 3 seconds. The display
screen then goes directly to the Diagnostic Menu.
2. After the display changes to the Diagnostic Menu, select the item you want to check, and the test
begins. To return to the previous screen, select
Return.
Navi System (Link)
Monitor Check
Unit Check
Car Status
GPS Information
YawRate
Tire Calibrate
Functional Setup
Version
(cont’d)
I s t he cor r ect nav i gat i on uni t i nst al l ed based ont he par t number ?
I s t he sof t w ar e v er si on mar k ed on t he nav i gat i onDV D l abel t he cor r ect one f or t he v ehi cl e y ear /mod el y ou ar e w or k i ng on?
Does t he nav i gat i on sy st em boot -up w i t h t he Acur aGl obe Scr een?
08/08/21 14:07:29 61SNR030_230_0138
ProCarManuals.com
DYNOMITE -2009-

Page 2418 of 2893

Page 2419 of 2893

ACURA CSX 2006 Service Repair Manual Î

Navi System Link
23-136Navigation System
System Diagnostic Mode (cont’d)
Navi System Link
Navi.ECUReturn
Exit Diag
Detecting..
GPS Ant.
Display Radio BACK
Air-Con
This diagnostic step test

Page 2420 of 2893

ACURA CSX 2006 Service Repair Manual Î
Î

Î

Î
Monitor Check
RGB ColorGray Tone
White Raster
23-137
Monitor Check
RGB
Gray Tone
White RasterReturn
RGB Color Gray Tone
White Raster Color Pattern
Black Raster Return
Re

Page 2421 of 2893

ACURA CSX 2006 Service Repair Manual ´
Î
Î
Î
Î
Black Raster
Color Pattern
Monitor Adjustment
Touch Panel Check
23-138Navigation System
System Diagnostic Mode (cont’d)
Black Raster
Color PatternReturn
Return
Re

Page 2422 of 2893

ACURA CSX 2006 Service Repair Manual ´
´µ
Î Î
´
Touch Panel CalibrationUnit Check
23-139
Return
Set
1 2
3 4
5Please press the center of’’ ’’button.
Select Check UnitsReturn
Display Radio
Navi ECU PC Card Info.

Page 2423 of 2893

ACURA CSX 2006 Service Repair Manual Î
ÎÎ
µ
µ
µ
Display
Radio Navi ECU
23-140Navigation System
System Diagnostic Mode (cont’d)
Display
OK
OK
Connection
Version 040423
RadioOK
Connection
OK
0mV
AM Electric Field

Page 2424 of 2893

ACURA CSX 2006 Service Repair Manual ´µ ´µ
Î
Î
Î
Î
´
µ
´
µ
´µ
PC Card info
Hard KeyCar Status
23-141
PC Card Information
ReturnReturn
PC Card is not inserted.
PC Card Information Return
Manufac

´µ ´µ
Î
Î
Î
Î
´
µ
´
µ
´µ
PC Card info
Hard KeyCar Status
23-141
PC Card Information
ReturnReturn
PC Card is not inserted.
PC Card Information Return
Manufacturer xxxxxx
Product Name xxxxxx
FILES
Hard KeyReturn
ZOOM OUT ZOOM IN
CANCEL SET UP MAP
MENU INFO
MODE CH
CH
VOL
VOL
FF
REW
RPT RDM
SEEK UP SCAN
AUDIO
CD/AUX AM/FMSKIP
SKIP
SEEK DOWN Keep Pushing to Return.
Car Status
0
VSP 0
ILL
0
BACK Close
Display
0
ILL CANCEL
There is no PC card in the PC slot, and the screen
should display, PC card is not inserted.
If the factory provides a PC card and instructs you to
insert it, the screen displays the Manufacturer, and
Product Name as shown in the following screen. Touch
the FILES button to see the contents of the card.
This diagnostic screen checks the status of each of the
hard buttons surrounding the navigation display. When
you press each hard button, the corresponding item on
the screen should flash blue. Touch the return key, or
press and hold the joystick to exit.
NOTE: It is normal for the VOL ( , ) CH ( , ) and
MODEbuttontobeinactive. Use this screen to confirm that navigation unit is
properly receiving input signals. Signals equal to (0) are
OFF, and signals equal to (1) are ON. If the value on the
display does not match the actual vehicle status, then
check the wire carrying the signal.
VSP-Vehicle Speed Pulse from ECM/PCM connector A (Navigation unit connector A (17P) terminal No. 13)
a) OFF (0) when vehicle is not moving
b) ON (1) when vehicle is moving
The VSP comes from the ECM/PCM as a dedicated
signal. Internally, the navigation unit compares the
actual VP on the map against street data to adjust the
pulse to speed scaling factor.
BACK-Reverse indication from taillight relay (Navigation unit connector C (12P) terminal No. 7)
a) OFF (0) when shift lever is in any position other
than reverse
b) ON (1) when shift lever is in reverse
The Back signal is used by the navigation unit to allow
the map screen to show the VP moving backwards
when in reverse and to trigger the optional rear view
camera. This signal is needed because the Speed Pulse
does not provide any directional information to the
system.
ILLCANCEL a) OFF (0) when the dash lights brightness control
button is less than 90 % brightness with the
headlights turned on.
b) ON (1) when the dash lights brightness control
button is more than 90 % brightness with the
headlights turned on.
(cont’d)
08/08/21 14:07:31 61SNR030_230_0144
ProCarManuals.com
DYNOMITE -2009-

Load next 8 pages

Page: < prev 1-10 ... 2385-2392 2393-2400 2401-2408 2409-2416 2417-2424 2425-2432 2433-2440 2441-2448 2449-2456 ... 2896 next >

charging spare tire location power steering fluid power steering change language snow chains