Page 129 of 2893
(#'
)
5-295-29
Transmission Mount Replacement
12x1.25mm
64 N·m
(6.5 kgf·m, 47 lbf·ft) A
22. Raise the vehicle on the lift.
23. M/T model: Tighten the front mount mounting bolt.
24. Install the splash shield (see step 40 on page 5-20).1. Loosen the upper torque rod mounting bolt (A).
2. Remove the air cleaner assembly (see page 11-345).
3. Remove the engine control module (ECM)/
powertrain control module (PCM) cover, then
remove the three bolts securing the ECM/PCM (see
step 10 on page 5-4).
4. Remove the under hood fuse/relay box from the ECM/PCM bracket, then remove the ECM/PCM
bracket(seestep13onpage5-4).
(cont’d)
08/08/21 14:21:04 61SNR030_050_0029
ProCarManuals.com
DYNOMITE -2009-
Page 130 of 2893
(#'
)
5-295-29
Transmission Mount Replacement
12x1.25mm
64 N·m
(6.5 kgf·m, 47 lbf·ft) A
22. Raise the vehicle on the lift.
23. M/T model: Tighten the front mount mounting bolt.
24. Install the splash shield (see step 40 on page 5-20).1. Loosen the upper torque rod mounting bolt (A).
2. Remove the air cleaner assembly (see page 11-345).
3. Remove the engine control module (ECM)/
powertrain control module (PCM) cover, then
remove the three bolts securing the ECM/PCM (see
step 10 on page 5-4).
4. Remove the under hood fuse/relay box from the ECM/PCM bracket, then remove the ECM/PCM
bracket(seestep13onpage5-4).
(cont’d)
08/08/21 14:21:04 61SNR030_050_0029
ProCarManuals.com
DYNOMITE -2009-
Page 131 of 2893

Î
Î
M/T model
A/T model
5-30 Engine Assembly
Transmission Mount Replacement (cont’d)
A
A
D
12x1.25mm
74N·m(7.5kgf·m,54lbf·ft) D
12x1.25mm
74 N·m
(7.5 kgf·m,
54 lbf·ft)
C E
12x1.25mm
74 N·m
(7.5 kgf·m, 54 lbf·ft)
6x1.0mm
10 N·m
(1.0 kgf·m,
7.2 lbf·ft)
B
D
12 x 1.25 mm
64 N·m
(6.5 kgf·m,
47 lbf·ft) D
12x1.25mm
64 N·m
(6.5 kgf·m,
47 lbf·ft)
C A
10 x 1.25 mm
38 N·m
(3.9 kgf·m, 28 lbf·ft)
E
12 x 1.25 mm
74 N·m
(7.5 kgf·m, 54 lbf·ft)
5. Raise the vehicle on the lift.
6. Remove the splash shield (see step 25 on page 5-5).
7. Loosen the lower torque rod mounting bolt (A).
8. M/T model: Loosen the front mount mounting bolt (A).
9. Lower the vehicle on the lift. 10. A/T model: Remove the transmission mount
stiffener (A).
11. M/T model: Remove the ground cable (B).
12. Remove the transmission mount (C).
13. Install the transmission mount, and tighten the transmission mount mounting bolts (D).
14. A/T model: Install the transmission mount stiffener.
15. Loosely tighten the new transmission mounting bolt and nuts (E).
16. M/T model: Install the ground cables.
Replace.
Replace.
Replace.
Replace. Replace.
Replace.
08/08/21 14:21:05 61SNR030_050_0030
ProCarManuals.com
DYNOMITE -2009-
Page 132 of 2893
M/T model
A/T model
5-31
12x1.25mm
74 N·m
(7.5 kgf·m, 54 lbf·ft)
12x1.25mm
74 N·m
(7.5 kgf·m, 54 lbf·ft) 14x1.5mm
93 N·m
(9.5 kgf·m, 69 lbf·ft)
12x1.25mm
64 N·m
(6.5 kgf·m, 47 lbf·ft)
17. Tighten the transmission mounting bolt and nuts. 18. Raise the vehicle on the lift. 19. Tighten the lower torque rod mounting bolt.
20. Lower the vehicle on the lift.
21. Tighten the upper torque rod mounting bolt.
(cont’d)
08/08/21 14:21:06 61SNR030_050_0031
ProCarManuals.com
DYNOMITE -2009-
Page 133 of 2893
(#'
)
5-325-32 Engine Assembly
Transmission Mount Replacement
(cont’d)
Lower Torque Rod Replacement
12x1.25mm
64 N·m
(6.5 kgf·m, 47 lbf·ft) A
A
22. Install the ECM/PCM bracket, then install the under- hood fuse/relay box to the ECM/PCM bracket (see
step 52 on page 5-22).
23. Install the ECM/PCM, then install the ECM/PCM cover (see step 56 on page 5-23)
24. Install the air cleaner assembly (see page 11-345).
25. Raise the vehicle on the lift.
26. M/T model: Tighten the front mount mounting bolt.
27. Install the splash shield (see step 40 on page 5-20). 1. Loosen the upper torque rod mounting bolt (A).
2. Raise the vehicle on the lift.
3. Remove the splash shield (see step 25 on page 5-5).
4. M/T model: Loosen the front mount mounting
bolt (A).
08/08/21 14:21:06 61SNR030_050_0032
ProCarManuals.com
DYNOMITE -2009-
Page 134 of 2893
(#'
)
5-325-32 Engine Assembly
Transmission Mount Replacement
(cont’d)
Lower Torque Rod Replacement
12x1.25mm
64 N·m
(6.5 kgf·m, 47 lbf·ft) A
A
22. Install the ECM/PCM bracket, then install the under- hood fuse/relay box to the ECM/PCM bracket (see
step 52 on page 5-22).
23. Install the ECM/PCM, then install the ECM/PCM cover (see step 56 on page 5-23)
24. Install the air cleaner assembly (see page 11-345).
25. Raise the vehicle on the lift.
26. M/T model: Tighten the front mount mounting bolt.
27. Install the splash shield (see step 40 on page 5-20). 1. Loosen the upper torque rod mounting bolt (A).
2. Raise the vehicle on the lift.
3. Remove the splash shield (see step 25 on page 5-5).
4. M/T model: Loosen the front mount mounting
bolt (A).
08/08/21 14:21:06 61SNR030_050_0032
ProCarManuals.com
DYNOMITE -2009-
Page 135 of 2893
M/T model
A/T model
5-33
14x1.5mm
93 N·m
(9.5 kgf·m,
69 lbf·ft)
14x1.5mm
88 N·m
(9.0 kgf·m,
65 lbf·ft)
A
14x1.5mm
93 N·m
(9.5 kgf·m, 69 lbf·ft)
14x1.5mm
88 N·m
(9.0 kgf·m, 65 lbf·ft)
A 12x1.25mm
64 N·m
(6.5 kgf·m, 47 lbf·ft)
12x1.25mm
64 N·m
(6.5 kgf·m, 47 lbf·ft)
5. Remove the lower torque rod (A).
6. Install the lower torque rod, then tighten the newlower torque rod mounting bolts in the numbered
sequence shown. 7. Lower the vehicle on the lift.
8. Tighten the upper torque rod mounting bolt.
9. Raise the vehicle on the lift.
10. M/T model: Tighten the front mount mounting bolt.
11. Install the splash shield (see step 40 on page 5-20).
Replace.
Replace.
Replace.
Replace.
08/08/21 14:21:07 61SNR030_050_0033
ProCarManuals.com
DYNOMITE -2009-
Page 136 of 2893
(#'
)
M/T model
A/T model
5-34 Engine Assembly
Upper Torque Rod Replacement
A
12x1.25mm
64 N·m
(6.5 kgf·m, 47 lbf·ft)
12x1.25mm
64 N·m
(6.5 kgf·m, 47 lbf·ft)
A
12x1.25mm
64 N·m
(6.5 kgf·m, 47 lbf·ft)
12x1.25mm
64 N·m
(6.5 kgf·m, 47 lbf·ft)
A
1. Raise the vehicle on the lift.
2. Remove the splash shield (see step 25 on page 5-5).
3. M/T model: Loosen the front mount mountingbolt (A).
4. Lower the vehicle on the lift. 5. Remove the upper torque rod (A).
6. Install the upper torque rod, then tighten the new
bolts in the numbered sequence shown.
Replace.
Replace.
Replace.
Replace.
08/08/21 14:21:08 61SNR030_050_0034
ProCarManuals.com
DYNOMITE -2009-