2000 TOYOTA CAMRY Service Repair Manual

Page 1841 of 4770

TOYOTA CAMRY 2000  Service Repair Manual AUTOMATIC TRANSAXLEFORWARD CLUTCH ±
AX±45
FORWARD CLUTCH
COMPONENTS
FORWARD CLUTCH DISASSEMBLY
1. CHECK PISTON STROKE OF FORWARD CLUTCH
Install a dial indicator and measuring terminal (SST) to-
geth

Page 1842 of 4770

TOYOTA CAMRY 2000  Service Repair Manual AUTOMATIC TRANSAXLEFORWARD CLUTCH ±
AX±46
2. REMOVE SNAP RING FROM CLUTCH DRUM
3. REMOVE FLANGE, DISCS AND PLATES
4. REMOVE RETURN SPRING
(a) Place SST on the spring retainer and compress the
spring

Page 1843 of 4770

TOYOTA CAMRY 2000  Service Repair Manual AUTOMATIC TRANSAXLEFORWARD CLUTCH ±
AX±47
(b) Remove the 2 O±rings from the piston.
6. IF NECESSARY, REMOVE OIL SEAL RINGS
Remove the 3 oil seal rings from the shaft.
FORWARD CLUTCH INSPECTION
1. I

Page 1844 of 4770

TOYOTA CAMRY 2000  Service Repair Manual AUTOMATIC TRANSAXLEFORWARD CLUTCH ±
AX±48
2. INSTALL CLUTCH PISTON TO CLUTCH DRUM
(a) Install the 2 new O±rings to the piston.
(b) Coat the O±ring with ATF.
(c) Press the piston into the drum with

Page 1845 of 4770

TOYOTA CAMRY 2000  Service Repair Manual AUTOMATIC TRANSAXLEFORWARD CLUTCH ±
AX±49
6. RECHECK PISTON STROKE OF FORWARD CLUTCH
Install a dial indicator and measuring terminal (SST) to-
gether, measure the forward clutch piston stroke while

Page 1846 of 4770

TOYOTA CAMRY 2000  Service Repair Manual AUTOMATIC TRANSAXLEFRONT PLANETARY GEAR ±
AX±50
FRONT PLANETARY GEAR
COMPONENTS
NO.1 ONE±WAY CLUTCH AND SUN GEAR
DISASSEMBLY
1. CHECK OPERATION OF NO.1 ONE±WAY CLUTCH
Hold the sun gear and turn th

Page 1847 of 4770

TOYOTA CAMRY 2000  Service Repair Manual AUTOMATIC TRANSAXLEFRONT PLANETARY GEAR ±
AX±51
3. REMOVE SUN GEAR FROM DRUM
(a) Using snap ring pliers, remove the snap ring from the
drum.
(b) Remove the sun gear from the drum.
4. CHECK SUN GEAR

Page 1848 of 4770

TOYOTA CAMRY 2000  Service Repair Manual AUTOMATIC TRANSAXLEFRONT PLANETARY GEAR ±
AX±52
2. REMOVE RING GEAR FLANGE
(a) Using a screwdriver, remove the snap ring.
(b) Remove the flange from the ring gear.
3. INSTALL RING GEAR FLANGE
(a) Po