2000 TOYOTA CAMRY rear view mirror

25
INTERIOR
 INNER REAR VIEW MIRROR
The inner rear view mirror is the type that is
mounted on the inside of the front windshield glass.
 OVERHEAD CONSOLE
An overhead console is provided in front of the map lamp to store a garage door opener transmitter. This console
is constructed to enable the operation of a transmitter in its stored state.
Also, by changing its cover, the console can be used to store a pair of sunglasses.
 SUN VISOR
Extension plates have been added to reduce glare
coming into the vehicle from the side.

Airbag Sensor Assembly Steering Wheel PadFront Passenger Airbag Assembly Spiral Cable
HANDLING PRECAUTIONS ON RELATED COMPONENTS
1. SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
Locations of SRS Components
Servicing vehicle with a Supplemental Restraint System (referred to as the SRS in the remainder of this
manual) installed.
When handling SRS components (removal, installation or inspection, etc.), always follow the directions
given in the repair manual for the relevant model year to prevent the occurrence of accidents and airbag
malfunction.
Also take the following precautions when repairing the body:

Work must be started after 90 seconds or longer from the time the ignition switch is set to the LOCK
position and the negative (±) terminal cable is disconnected from the battery.
(The airbag system is equipped with a back±up power source so that if work is started within 90 sec-
onds of disconnecting the negative (±) terminal cable of the battery, the airbag may be deployed.)
When the negative (±) terminal cable is disconnected from the battery, memory of the clock and audio
systems will be cancelled. So before starting work, make a record of the contents memorized by each
memory system. Then when work is finished, reset the clock and audio systems as before.
When the vehicle has tilt and telescopic steering, power seat, outside rear view mirror and power shoul-
der belt anchorage, which are all equipped with memory function, it is not possible to make a record of
the memory contents. So when the operation is finished, it will be necessary to explain this fact to the
customer, and request the customer to adjust the features and reset the memory.

When using electric welding, first disconnect the SRS connector (yellow color and 2 pins) under the
steering column near the combination switch connector on the glove compartment finish plate and
lower the front scuff plate before starting work.
INTRODUCTIONIN-6

Parts NameCode
Front Bumper CoverTSOP
Radiator Grille (Models Except USA & CANADA)ABS
Headlight (For USA & CANADA)PC/PP
Front Turn Signal LightPMMA/ASA
Front Fog Light (Models Except USA & CANADA)PC/PP
Side Turn Signal Light (Models Except USA & CANADA)SAN/AAS
Outer Rear View MirrorABS
Outside Handle (Front, Rear)PC/PBT
Front Fender Outside MouldingPVC
Door Outsider Moulding (Front, Rear)PVC
Quarter Panel Outside Moulding (Front, Rear) (For Europe)PVC
Front Fender Mudguard (For USA & CANADA)PP/PMMA
Front Fender Mudguard (Models Except USA & CANADA)PP/EPDM
Quarter Panel Mudguard (For USA & CANADA)PP/PMMA
Quarter Panel Mudguard (Models Except USA & CANADA)PP/EPDM
Rear Bumper Cover (For USA & CANADA)PUR
Rear Bumper Cover (Models Except USA & CANADA)TSOP
Rear Combination Light (For USA & CANADA) PMMA/ASA
PMMA/ABS/PC
Rear Combination Light (Models Except USA & CANADA)PMMA/ASA
Licence Plate LightPC
Back±up Light (Rear Light)PMMA/ASA
LOCATION OF PLASTIC BODY PARTS
HINT:

Resin material differs with model.
/ Made up of 2 or more kinds of materials.
PLASTIC BODY PARTSPP-4

'99camry U
2
Instrument panel overview
1. Rear view mirror remote control levers
2. Side defroster outlets
3. Side vents
4. Instrument cluster
5. Center vents
6. Glove box
7. Electric moon roof switch and
personal light
8. Garage door opener box or
miscellaneous box
9. Power door lock switches
10. Power window switches
11. Cup holders
12. Cup holder or rear ashtray
13. Parking brake lever
14. Automatic transmission selector lever
or manual transmission gear shift lever
15. Auxiliary box
16. Hood lock release lever

'99camry U
3
1. Power rear view mirror control switch
2. Headlight and turn signal switch
3. Wiper and washer switches
4. Clock
5. Emergency flasher switch
6. Car audio
7. Rear window and outside rear view
mirror defoggers switch
8. Air conditioning controls
9. Front ashtray
10. Power outlet
11. Cigarette lighter
12. Ignition switch
13. Cruise control switch
14. Tilt steering lock release lever
15. Traction control system off switch
16. Instrument panel light control knob

'99camry U
27
Part 1
OPERATION OF
INSTRUMENTS AND
CONTROLSÐ
Chapter 1±3
Seats, Seat belts,
Steering wheel and
Mirrors

Seats

Front seats

Fold±down rear seat

Head restraints

Seat belts

SRS driver and front passenger
airbags

SRS side airbags

Child restraint

Tilt steering wheel

Outside rear view mirrors
Anti±glare inside rear view
mirror

Sun visors
Seats
While the vehicle is being driven, all ve-
hicle occupants should have the seatback
upright, sit well back in the seat and prop-
erly wear the seat belts provided.
CAUTION

Do not drive the vehicle unless the
occupants are properly seated. Do
not allow sitting on top of a
folded±down seatback, or in the
luggage compartment. Persons not
properly seated and not properly re-
strained by seat belts can be se-
verely injured in the event of emer-
gency braking or a collision.

During driving, do not allow pas-
sengers to stand up or move
around between seats. Severe inju-
ries can occur in the event of emer-
gency braking or a collision.

'99camry U
74
CAUTION

Do not adjust the steering wheel
while the vehicle is moving.

After adjusting the steering wheel,
try moving it up and down to make
sure it is locked in position.
Outside rear view mirrorsÐ
Adjust the mirror so that you can just
see the side of your vehicle in the mir-
ror.
Be careful when judging the size or dis-
tance of any object seen in the outside
rear view mirror on the passenger 's side.
It is a convex mirror with a curved sur-
face. Any object seen in a convex mirror
will look smaller and farther away than
when seen in a flat mirror.
On some models, when you push the rear
window defogger switch, the heater panels
in the outside rear view mirrors will quick-
ly clear the mirror surface.
CAUTION

Do not adjust the mirror while the
vehicle is moving. It may cause the
driver to mishandle the vehicle and
an accident may occur resulting in
personal injuries.

Since the mirror surfaces can get
hot, keep your hands off them when
the defogger switch is on.

'99camry U
75
To adjust the rear view mirror, simply
operate the control lever.
NOTICE
If ice should jam the mirror, do not
operate the control or scrape the mir-
ror face. Use a spray de±icer to free
the mirror.
To adjust a mirror, use the switches.
1. Master switchÐTo select the mirror to
be adjusted
Place the switch at ºLº (left) or ºRº
(right).
2. Control switchÐTo move the mir-
ror
Push the switch in the desired
direction.
Mirror can be adjusted when key is in the
ºACCº or ºONº position.
NOTICE
If ice should jam the mirror, do not
operate the control or scrape the mir-
ror face. Use a spray de±icer to free
the mirror.
ÐRear view mirror remote
controlÐPower rear view mirror
control