2000 TOYOTA CAMRY Service Repair Manual

Page 4513 of 4770

TOYOTA CAMRY 2000  Service Repair Manual WINDSHIELD WIPER BLADE MAINTENANCE AND CLEANING ± BO030-01December 7, 2001
Page 2 of 2
3. Contributors to Poor Performance/Decreased Rubber Blade Life (require rubber
replacement)
�Dusty areas cause

Page 4514 of 4770

TOYOTA CAMRY 2000  Service Repair Manual BRAKES
BK91-001
MARCH 15, 1991
ALL MODELS
Printed on Recycled Paper.
TOYOTA MOTOR SALES U.S.A., INC.
BRAKE DISC ANTI±RUST COVER REMOVALPage 1 of 2
During the removal of the Anti±Rust Covers, do not

Page 4515 of 4770

TOYOTA CAMRY 2000  Service Repair Manual BRAKE DISC ANTI±RUST COVER REMOVAL (CONTD)Page 2 of 2
RECOMMENDED REMOVAL PROCEDURE:
Turn the right front wheel to full right lock.
Unhook the Anti±Rust Cover from the disc brake dust cover, then p

Page 4516 of 4770

TOYOTA CAMRY 2000  Service Repair Manual Toyota Supports ASE CertificationPage 1 of 1
BR001±99
Title:
FRONT BRAKE NOISE
Models:
97±99 V±6 Camry and 98±99 Avalon
Technical Service
BULLETIN
April 23, 1999
  
New Front Brake Pad Kits ar

Page 4517 of 4770

TOYOTA CAMRY 2000  Service Repair Manual TOYOTA MOTOR SALES U.S.A., INC.
This TSB outlines the causes of brake vibration and pulsation, as well as the best corrective 
measures to use.
CONTENTS
1) Symptoms of brake vibration and pulsation
2)

Page 4518 of 4770

TOYOTA CAMRY 2000  Service Repair Manual BR002±94
BRAKE VIBRATION AND/OR PULSATIONPage 2 of 6
B. PEDAL PULSATION
Applying brakes causes the brake pedal to pulsate.  This brake pulsation sometimes
causes the steering wheel to oscillate when

Page 4519 of 4770

TOYOTA CAMRY 2000  Service Repair Manual BR002±94
BRAKE VIBRATION AND/OR PULSATIONPage 3 of 6
There are two factors which cause excessive rotor thickness variation:
A. ROTOR RUNOUT
±Rotor runout can be caused by poor mating of flanges betw

Page 4520 of 4770

TOYOTA CAMRY 2000  Service Repair Manual BR002±94
BRAKE VIBRATION AND/OR PULSATIONPage 4 of 6
3) Advantages Of Using An On±Car Brake Lathe
Toyota Motor Corporation Engineers strongly recommend that an on±car brake lathe be used
for repair