Page 633 of 4770
INSTALLATION
1. Temporarily install the new parts and mea-
sure each part in accordance with the body
dimension diagram.
HINT: First install the hood lock support.
BODY PANEL REPLACEMENTRE-11
Page 634 of 4770
FRONT FENDER FRONT APRON (ASSY)
REMOVAL (With the radiator support removed.)
BODY PANEL REPLACEMENTRE-12
Page 635 of 4770
INSTALLATION
1. Temporarily install the new parts and mea-
sure each part in accordance with the body
dimension diagram.
BODY PANEL REPLACEMENTRE-13
Page 636 of 4770
FRONT APRON TO COWL SIDE MEMBER
(ASSY)
REMOVAL (With the front fender front apron, cowl top
side panel removed.)
Front Apron to Cowl
Side Upper Member
Front Apron to Cowl
Side Lower Member
1. After removing the front apron to cowl side
lower member, remove the front apron to
cowl side upper member.
BODY PANEL REPLACEMENTRE-14
Page 637 of 4770
INSTALLATION
Assembly Mark
1. When temporarily installing the new parts,
determine the installation position by the as-
sembly mark. Then measure each part in ac-
cordance with the body dimension diagram.2. Temporarily install the front fender and hood,
and check the fit.
BODY PANEL REPLACEMENTRE-15
Page 638 of 4770
FRONT FENDER APRON (ASSY)
REMOVAL (With the radiator support, cowl top side panel
removed.)
BODY PANEL REPLACEMENTRE-16
Page 639 of 4770
INSTALLATION
Assembly Mark
1. When temporarily installing the new parts,
determine the installation position by the as-
sembly mark.
2. Measurements must be accurate with the
body dimension diagram, as this affects the
front wheel alignment.3. Temporarily install the front fender and hood,
and check the fit.
BODY PANEL REPLACEMENTRE-17
Page 640 of 4770
COWL TOP SIDE PANEL (ASSY)
REMOVAL
Cut with disc
sander, etc.
Cut with disc
sander, etc.
BODY PANEL REPLACEMENTRE-18